|
US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41936.2-2022: Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41936.2-2022 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
| Valid |
GB/T 41936.2-2022
|
PDF similar to GB/T 41936.2-2022
Basic data | Standard ID | GB/T 41936.2-2022 (GB/T41936.2-2022) | | Description (Translated English) | Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G31 | | Classification of International Standard | 83.080.20 | | Word Count Estimation | 6,677 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41936.2-2022: Determination of stiffness in torsion of flexible materials - Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.080.20
CCSG31
National Standards of People's Republic of China
Determination of torsional stiffness of plastic flexible materials
Part 2.Plasticized vinyl chloride homopolymers and copolymers
(ISO 458-2.1985, IDT)
Posted on 2022-12-30
2023-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is part 2 of GB/T 41936 "Determination of Torsional Rigidity of Plastic Flexible Materials". GB/T 41936 has been issued
The following sections.
--- Part 1.General method;
--- Part 2.Plasticized vinyl chloride homopolymers and copolymers.
This document is equivalent to ISO 458-2.1985 "Determination of torsional stiffness of plastic flexible materials - Part 2.Plasticized vinyl chloride homopolymers
and Copolymers”.
The chapter "Terms and Definitions" has been added to this document.
The following minimal editorial changes have been made to this document.
---The specific article number is quoted in the text, and the era number of the normative reference document ISO 458-1 is added;
--- Increased description of each parameter in formula (1).
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15).
This document was drafted by. Guangzhou Institute of Quality Supervision and Testing, China Blue Chenguang Chemical Research and Design Institute Co., Ltd., SAIC-GM-Wuling
Car Co., Ltd., Xiamen Topola Material Technology Co., Ltd., Dongguan Starting Point Information Technology Co., Ltd., Jilin Province Product Quality Supervision
Inspection Institute, Qingdao Product Quality Inspection Research Institute.
The main drafters of this document. Yu Qiaoling, Chen Weili, Zhang Yanjun, Lan Xian, Wu Feng, Xie Yuanbo, Yu Chunna, Liu Yuchun, Li Shangyu, Guo Yingying,
Zeng Xianchen.
Introduction
GB/T 41936 consists of two parts.
--- Part 1.General method. The purpose is to provide a general method for the determination of the torsional stiffness of flexible plastics, and to give the
Relevant requirements for testing equipment.
--- Part 2.Plasticized vinyl chloride homopolymers and copolymers. The purpose is to provide plasticized vinyl chloride homopolymer and copolymer materials
Rotational stiffness provides a test method.
For plasticized polyvinyl chloride, the logarithm of torsional stiffness versus temperature curve is inversely S-shaped. Each curve consists of 3 regions.
a) Two slowly changing regions, where the stiffness changes relatively slowly with temperature.
1) In the high stiffness region, the material exhibits high stiffness, which some scholars believe is due to the lack of elasticity of the material. Clash and
Berg[1] gives the characteristic value of torsional stiffness in this area as 310MPa (3.1×109dyn/cm2).
2) In the region of low stiffness, the material exhibits high elasticity. The corresponding characteristic value of torsional stiffness in this area is 4.1MPa (42kgf/
cm2), this value applies to film materials that are still sufficiently flexible at normal service temperatures, such materials are usually used
Curtains, drapes and waterproofing.
b) In the middle stiffness area, the stiffness of this area changes relatively quickly with temperature, and there is an inflection point in the curve, and the characteristic value of torsional stiffness is 22.8MPa
(233kgf/cm2).
Considering the accuracy of the test, the torsional stiffness eigenvalues of the three regions are.
---300MPa (high stiffness area);
---23MPa (medium rigidity area);
---4MPa (low stiffness area).
34, pp. 1218-1222 (1942).
Determination of torsional stiffness of plastic flexible materials
Part 2.Plasticized vinyl chloride homopolymers and copolymers
1 Scope
This document describes a method for the determination of the temperature corresponding to the three characteristic values of torsional stiffness of plasticized vinyl chloride homopolymers and copolymers.
This document applies to flexible materials that use vinyl chloride homopolymers and copolymers as main raw materials and add plasticizers.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
ISO 458-1.1985 Determination of torsional rigidity of plastic flexible materials - Part 1.General method (Plastics-
Note. GB/T 41936.1-2022 Determination of torsional rigidity of plastic flexible materials Part 1.General method (ISO 458-1.1985, IDT)
3 Terms and Definitions
This document does not have terms and definitions that need to be defined.
4 principles
For plasticized vinyl chloride homopolymers and copolymers, according to method A described in ISO 458-1.1985, when the selected deflection angle is 55°~65°,
Measure the temperature corresponding to three torsional stiffness characteristic values (300MPa, 23MPa and 4MPa) of the material.
5 devices
See Clause 4 of ISO 458-1.1985.
6 samples
Use the following samples in order to draw a curve in which the samples have the same shape at the eigenvalues.
a) Specimen I, with a thickness of 1.8mm~2mm, is used to draw the part of the curve area whose characteristic value of torsional stiffness is 300MPa;
b) Specimen II, with a thickness of 2 mm to 5 mm, used to draw the part of the curve area where the characteristic value of torsional stiffness is 23 MPa;
c) Specimen III, with a thickness of 4mm~5mm, is used to draw the part of the curve area whose characteristic value of torsional stiffness is 4MPa.
The length of the sample should be 60mm±2mm, and the width should be 6.2mm~6.4mm.
Note 1.A single sample with a thickness of 4mm~5mm is used to draw the curve parts with characteristic values of torsional stiffness of 23MPa and 4MPa to shorten the test
time.
Note 2.Some properties of plastics may change slightly during placement, especially those involved in this method. Record the date the specimen was prepared. Enter
When conducting the comparison test, the state of the sample should be adjusted for at least 48 hours.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41936.2-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41936.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41936.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41936.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|