HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 41934-2022 English PDF

US$334.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41934-2022: Plastics - Vertical flame spread determination for film and sheet
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 41934-2022English334 Add to Cart 4 days [Need to translate] Plastics - Vertical flame spread determination for film and sheet Valid GB/T 41934-2022

PDF similar to GB/T 41934-2022


Standard similar to GB/T 41934-2022

GB/T 41758.2   GB/T 41682   GB/T 41877.1   GB/T 41932   GB/T 41931   

Basic data

Standard ID GB/T 41934-2022 (GB/T41934-2022)
Description (Translated English) Plastics - Vertical flame spread determination for film and sheet
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G31
Classification of International Standard 83.080.01
Word Count Estimation 18,139
Date of Issue 2022-12-30
Date of Implementation 2023-04-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 41934-2022: Plastics - Vertical flame spread determination for film and sheet

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.080.01 CCSG31 National Standards of People's Republic of China Determination of vertical flame spread of plastic films and sheets (ISO 12992.2017, IDT) Posted on 2022-12-30 2023-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is equivalent to ISO 12992.2017 "Determination of Vertical Flame Spread of Plastic Films and Sheets". Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC15). This document is drafted by. Zhonglan Chenguang Chemical Research and Design Institute Co., Ltd., Shenzhen Jundingda New Materials Co., Ltd., Beijing Jun Yi Technology Co., Ltd., Shanghai Qianshi Technology Co., Ltd., Foshan Shirui Advertising Logo Co., Ltd., Zhejiang Ruigao New Materials Co., Ltd. Division, Nanjing Jiangning Analytical Instrument Co., Ltd., Dongguan Shanpu Industrial Co., Ltd., Zhejiang Huafeng Synthetic Resin Co., Ltd., Fujian Province Product Quality Inspection and Research Institute, Shandong Dawn Polymer Materials Co., Ltd., Guangzhou Institute of Quality Supervision and Inspection, Liaocheng University, Jilin Province Product Quality Supervision and Inspection Institute, Qingdao Senlida Packaging Co., Ltd., Jiangmen Dezhongtai Engineering Plastic Technology Co., Ltd., Shaoxing Xiangyu Green Packaging Co., Ltd. Company, Sinopec (Beijing) Chemical Research Institute Co., Ltd. The main drafters of this document. Jia Haiqiao, Li Cao, Cheng Wenming, Lu Ning, Yuan Wei, Zhao Junhuan, Wang Fuhai, Tan Qiulian, Jin Meijin, He Yang, Wang Qiaolin, Chen Weili, Li Yongquan, Teng Mouyong, Li Shangyu, Qi Ji, Yang Baosen, Xiong Zishuai, Hu Hailin.

Introduction

Thin flexible plastic films and sheets are widely used in various fields such as packaging, construction, housing, industry and transportation, especially flexible plastic films and The vertical flame spread of the sheet is a fire safety concern. This document gives guidelines for the determination of flexible plastic films and sheets by means of a small flame source. method of vertical flame spread. This document is also intended as a pre-selection test for materials used in equipment and electrical components. The final selection of material will depend on its compliance with this usage in the device. Test results obtained only by the tests specified in this document may not fully reflect the fire hazards of plastic films and sheets. Determination of vertical flame spread of plastic films and sheets

1 Scope

This document describes the measurement of the flame spread of plastic film and sheet specimens up to 3 mm thick with a small ignition flame in the vertical direction Methods of performance measurement.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 11925-2 Tests for reaction to fire - Flammability of building products under direct flame impingement - Part 2.Single source test Single-flame source test) Note. GB/T 8626-2007 Test methods for flammability of building materials (ISO 11925-2.2002, IDT) ISO 13943 Fire Safety Vocabulary (Firesafety-Vocabulary)

3 Terms and Definitions

The terms and definitions defined in ISO 13943 and the following apply to this document. 3.1 afterglow The sustained glow of a material after the flame has ceased to be removed from the source of ignition under specified conditions, or when no flame is produced. 3.2 Flame spread time flame-spreadtime The time required for a flame front on a burning material to travel a specified distance along a surface or to cover a specified surface area under specified conditions. Note. The flame front refers to the boundary of the flaming burning area on the surface of the material or through the gas mixture. 3.3 flamingdroplet Molten substance that separates from the burning object and continues to burn during the dripping process during the test. 3.4 flame position seatoflame The location of the flame at the leading edge of the affected area. Note. See Figure 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41934-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41934-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41934-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41934-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.