|
US$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41353-2022: Remanufacturing - Guidelines for life cycle cost analysis of mechanical products
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41353-2022 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Remanufacturing - Guidelines for life cycle cost analysis of mechanical products
| Valid |
GB/T 41353-2022
|
PDF similar to GB/T 41353-2022
Basic data | Standard ID | GB/T 41353-2022 (GB/T41353-2022) | | Description (Translated English) | Remanufacturing - Guidelines for life cycle cost analysis of mechanical products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Word Count Estimation | 11,170 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41353-2022: Remanufacturing - Guidelines for life cycle cost analysis of mechanical products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Remanufacturing - Guidelines for life cycle cost analysis of mechanical products
ICS 13.020
CCSJ04
National Standards of People's Republic of China
Guidelines for Life Cycle Cost Analysis of Remanufactured Mechanical Products
Published on 2022-03-09
2022-10-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General rule 1
5 Cost Analysis 2
5.1 Objective and role 2
5.2 Data required for analysis 2
5.3 Cost Estimation Method 2
5.4 Fee calculation3
5.5 Analysis procedure 3
Appendix A (Informative) Basic Methods for Estimating Life Cycle Costs of Remanufactured Products4
A.1 Engineering Estimation Method 4
A.2 Parameter estimation method 4
A.3 Analogy Estimation 4
A.4 Expert Estimation 4
Appendix B (Informative) Typical Cost Activities for Remanufactured Product Life Cycle Stages5
B.1 Remanufactured Product Production Stage 5
B.2 Remanufactured Product Use Stage 5
B.3 Remanufactured product decommissioning disposal stage 5
Reference 6
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
drafted.
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This document is under the jurisdiction of the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337).
This document is drafted by. Hefei-Beijing Tianjin-Hebei Remanufacturing Industry Technology Research Co., Ltd., Hefei University of Technology, Chinese People's Liberation Army Army
Armored Forces Academy, Beijing Ruiman Technology Co., Ltd., Hejian Ruichuang Testing Technology Co., Ltd., China Machinery Productivity Promotion Center, Guangzhou Huadu
Global Automatic Transmission Co., Ltd., Zhuhai Tianwei Pegasus Printing Consumables Co., Ltd., China Machinery Research Institute Standard Technology Research Institute (Beijing) Co., Ltd.,
Guangdong University of Technology, Hebei Ruizhao Laser Remanufacturing Technology Co., Ltd., 5719th Factory of the Chinese People's Liberation Army, GEM (Wuhan)
Han) City Mining Industry Group Co., Ltd., Shanghai Xinfumei Transmission Technology Service Co., Ltd., Anhui University, Beijing University of Science and Technology, Baoding
Great Wall Scrap Car Recycling and Dismantling Co., Ltd., Hebei Changli Auto Parts Co., Ltd.
The main drafters of this document. Zhang Wei, Zheng Handong, Yu Helong, Shi Peijing, Zhou Xinyuan, Liu Bohai, Wei Min, Sun Tingting, Huang Zhiyong, Zhang Tao,
Xi Daoyun, Wang Hongmei, Chen Yushuang, Song Qi, Wang Yong, Ji Xiaochao, Song Zhanyong, Han Hongsheng, Guo Shuangquan, Song Huawei, Chi Yongbo, Chen Yi, Chen Cunguang,
Sun Peng, Hou Huanhuan, Lu Shidong, Yao Pengyu.
Introduction
Remanufacturing of mechanical products is an important part of green manufacturing and an effective means to establish and improve a green, low-carbon and circular development economic system.
It is an important measure to implement the Circular Economy Promotion Law and promote the comprehensive green transformation of economic and social development. Remanufacturing refers to the remanufacturing of blanks
The process of professional repairing or upgrading, so that its quality characteristics are not lower than the level of prototype new products. Remanufacturing is the "reuse" of the circular economy
To accelerate the development of the remanufacturing industry is an important aspect of cultivating new economic growth points. Remanufacturing Economics and Remanufacturing Solutions
Design, technology or process selection are closely related, and economic benefit evaluation is an objective requirement for developing remanufacturing industry and promoting the progress of remanufacturing technology.
Life cycle cost is an important economic evaluation index in the field of circular economy and sustainable development.
Evaluate costs at stages such as remanufacturing, technology or process selection, production planning, product acquisition and end-of-life disposal.
for reference. Because remanufacturing has unique life cycle characteristics and product characteristics, and different remanufacturing technology models have an impact on production costs, usage costs
Capital, end-of-life costs, and environmental costs have a significant impact. Therefore, the economic benefit analysis of remanufacturing should not only consider the cost savings of the production process.
It is more necessary to analyze the economic benefits of remanufacturing to avoid raw material waste, reduce environmental impact, and reduce user acquisition and use costs.
The guideline for life cycle cost analysis of remanufactured mechanical products is an important part of the remanufacturing management series of standards,
The manufacturing standard system is of great significance. The results of life cycle cost analysis can be used to analyze the economic benefits and enterprise performance of remanufactured products.
Reference, guide enterprises to pay attention to the life cycle cost of remanufactured products. The purpose of this document is to standardize the life cycle cost analysis of remanufacturing companies.
It is convenient for enterprises to optimize the life cycle cost composition of remanufactured products and encourage users to choose remanufactured products of high quality and low price. This document can solve
Determine the cross-field, cross-industry, and cross-professional application and coordination of remanufacturing, so as to play a good normative role and play an important role in the development of the remanufacturing industry.
significance.
Guidelines for Life Cycle Cost Analysis of Remanufactured Mechanical Products
1 Scope
This document specifies the general principles, objectives and functions of the life cycle cost analysis of remanufactured mechanical products, the data required for the analysis, and the cost estimate.
Calculation methods, cost calculation and analysis procedures, etc.
This document is applicable to the remanufacturing scheme design, process selection and economic benefit evaluation of mechanical products.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 28619-2012 Remanufacturing term
3 Terms and Definitions
The terms and definitions defined in GB/T 28619-2012 and the following terms and definitions apply to this document.
3.1
After the remanufacturing process and meeting the remanufacturing requirements, the product is re-marketed.
[Source. GB/T 28619-2012, 2.3]
3.2
Experience the whole process of remanufacturing blank recovery, remanufacturing processing, remanufacturing product sales and use, until remanufacturing products are disposed of again.
[Source. GB/T 28619-2012, 2.24, with modifications]
3.3
The sum of all costs incurred during the life cycle of a remanufactured product.
3.4
Evaluate the cost composition of each stage in the life cycle of a remanufactured product or the difference in life cycle cost of two or more similar products
The process of conducting an evaluation.
4 General
4.1 From the perspective of life cycle stage, the scope of life cycle cost analysis of remanufactured products includes the production stage, use stage and
The full cost of the decommissioning disposal phase.
4.2 From the perspective of the source of cost, the scope of life cycle cost analysis of remanufactured products includes producer cost and user cost, producer cost
Use and user costs are the direct or indirect costs actually incurred during the production and use of remanufactured products.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41353-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41353-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41353-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41353-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|