|
US$429.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41066.3-2022: Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 3: Operations and surveys
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41066.3-2022 | English | 429 |
Add to Cart
|
4 days [Need to translate]
|
Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 3: Operations and surveys
| Valid |
GB/T 41066.3-2022
|
PDF similar to GB/T 41066.3-2022
Basic data | Standard ID | GB/T 41066.3-2022 (GB/T41066.3-2022) | | Description (Translated English) | Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 3: Operations and surveys | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 22,278 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41066.3-2022: Petroleum drilling and production equipment - Offshore semisubmersible drilling unit - Part 3: Operations and surveys
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75.180.10
CCSE92
National Standards of People's Republic of China
Oil and gas drilling equipment Offshore oil semi-submersible
Drilling platform part 3.operation and inspection
Posted on 2022-12-30
2023-07-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 1
5 operation 2
5.1 General requirements 2
5.2 Migration job 2
5.3 Positioning system operation 5
5.4 Drilling system operation 5
5.5 Anti-tropical cyclone 8
5.6 Anti-internal wave flow 9
5.7 Antifreeze and anti-icing 9
6 test 10
6.1 Inspection classification 10
6.2 Preparation before inspection 10
6.3 Statutory inspection 10
6.4 Class survey 12
6.5 Special inspection 13
Appendix A (Normative) Documents Required for Platform Operation 15
Appendix B (Informative) Safety reserve time calculation table 16
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is part 3 of GB/T 41066 "Offshore Oil Semi-submersible Drilling Platforms for Oil and Gas Drilling Equipment".
GB/T 41066 has issued the following parts.
--- Part 1.Functional configuration and design;
--- Part 2.Construction, installation and commissioning acceptance;
--- Part 3.Operation and inspection.
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96).
This document is drafted by. China Oilfield Services Co., Ltd., China Classification Society, Sinopec Offshore Oil Engineering Co., Ltd., Baojishi
Petroleum Machinery Co., Ltd., Petroleum Industry Well Control Device Quality Supervision and Inspection Center, Youlian Shipyard (Shekou) Co., Ltd.
The main drafters of this document. Liu Zhiliang, Xian Minyuan, Jin Xueyi, Song Linsong, Liu Jingyuan, Peng Zhihui, Huang Yuquan, Niu Maomeng, Zhong Ying, Liu Yuan,
Li Chun, Wang Qing, Zhang Jianzhou, Jiang Aiguo, Song Qilong, Zhang Benwei, Wang Anyi, Xu Fangxiong, Gao Chang, Liao Jiang, Liu Zhexu.
Introduction
Semi-submersible drilling platform is the mainstream deepwater drilling equipment in the world. In recent years, my country has made great progress in the R&D and manufacturing of offshore drilling equipment.
Great progress has been made, and the independent design and construction of large-scale medium and deep water oil and gas equipment has been basically realized, and an echelon series has been formed in terms of equipment scale. to ensure that
Offshore drilling equipment has developed in an orderly and healthy manner. Offshore oil fixed platform module drilling rigs, offshore oil jack-up drilling platforms, and offshore rock drilling rigs have been established.
Oil semi-submersible drilling platform as the main line of the standard system. In this standard system, "offshore oil semi-submersible drilling platform" focuses on the
It is planned to establish a quality control technology system covering the entire life cycle of the platform to provide technical support for the high-quality development of offshore oil and gas resources.
GB/T 41066 "Oil and Natural Gas Drilling Equipment for Offshore Oil Semi-submersible Drilling Platforms" consists of three parts.
--- Part 1.Functional configuration and design. The purpose is to standardize the overall configuration, equipment selection and design of semi-submersible drilling platforms.
--- Part 2.Construction, installation and commissioning acceptance. The purpose is to standardize the semi-submersible drilling platform construction and equipment installation, commissioning methods,
Acceptance criteria.
--- Part 3.Operation and inspection. The purpose is to standardize the certification, operation and inspection requirements of semi-submersible drilling platforms after they are put into operation.
This document provides technical basis for platform operation and operation inspection, so that it has good safety operation guidelines and operation inspection methods.
Oil and gas drilling equipment Offshore oil semi-submersible
Drilling platform part 3.operation and inspection
1 Scope
This document specifies the operation and inspection requirements for offshore oil semi-submersible drilling platforms after delivery.
This document applies to the operation and inspection of offshore oil semi-submersible drilling platforms (hereinafter referred to as "platforms").
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 3836.16 Explosive atmospheres Part 16.Inspection and maintenance of electrical installations
GB/T 19832 Inspection, maintenance, repair and remanufacturing of drilling and production lifting equipment for oil and gas industry
GB/T 25444.3 Mobile and fixed offshore installations electrical installations Part 3.Equipment
GB/T 30217.2 Drilling and oil production equipment for oil and gas industry - Part 2.Analysis method and operation of deep water drilling riser
work and integrity
SY/T 6270 Use and maintenance of cementing and fracturing manifolds for oil and gas drilling and production equipment
SY/T 6564 Safety Code for Offshore Petroleum Operation System
SY/T 6632 Offshore Oil Safety Warning Signs
SY/T 6666 Recommended practices for the selection and maintenance of steel wire ropes for the oil and gas industry
SY/T 6667 Shunt system equipment and operation recommended practice
SY/T 6671 Classification recommended practice for Class I Zone 0, Zone 1 and Zone 2 of electrical equipment sites for petroleum facilities
SY/T 6868 Blowout prevention equipment system for drilling operations
SY/T 6962 Configuration and Installation Requirements for Offshore Drilling Equipment Well Control System
SY/T 10025 Pre-operation Inspection Specifications for Offshore Drilling Units
SY/T 10035 Drilling platform towing and positioning operation specification
3 Terms and Definitions
This document does not have terms and definitions that need to be defined.
4 Abbreviations
The following abbreviations apply to this document.
DP. Dynamic Positioning (DynamicPositioning)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41066.3-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 41066.3-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41066.3-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41066.3-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|