|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 40681.5-2021: Statistical methods in monitoring process capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 40681.5-2021 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Statistical methods in monitoring process capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
| Valid |
GB/T 40681.5-2021
|
PDF similar to GB/T 40681.5-2021
Basic data | Standard ID | GB/T 40681.5-2021 (GB/T40681.5-2021) | | Description (Translated English) | Statistical methods in monitoring process capability and performance - Part 5: Process capability estimates and performance for attributive characteristics | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A41 | | Word Count Estimation | 14,137 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 40681.5-2021: Statistical methods in monitoring process capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Statistical methods in monitoring process capability and performance - Part 5.Process capability estimates and performance for attributive characteristics
ICS 03.120.30
A41
National Standards of People's Republic of China
Statistical methods for production process capability and performance monitoring
Part 5.Process capability and counting characteristics
Performance estimation
(ISO 22514-5.2019,Statisticalmethodsinprocessmanagement-
Released on 2021-10-11 and implemented on 2022-05-01
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Symbols and abbreviations 1
4.1 Symbol 1
4.2 Abbreviations 1
5 Application premise 2
5.1 Overview 2
5.2 Specification establishment 2
5.3 Sample size 2
6 Process analysis 3
6.1 Process Variation 3
6.2 Data source 3
6.3 Estimation of process quality level QP 3
7 Process performance 5
7.1 Overview 5
7.2 Confidence interval of nonconforming product rate 6
8 Process capability 7
Reference 9
Foreword
The plan of GB/T 40681 "Statistical Methods for Monitoring Production Process Capability and Performance" is divided into the following 8 parts.
---Part 1.General principles and concepts;
---Part 2.Process capability and performance of time-dependent process models;
---Part 3.Research on machine performance of discrete product measurement data;
---Part 4.Process capability estimation and performance measurement;
---Part 5.Process capability and performance estimation of counting characteristics;
---Part 6.Multivariate normal process capability analysis;
---Part 7.Measurement process capability;
---Part 8.Equipment performance analysis of multi-state production process.
This part is Part 5 of GB/T 40681.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the redrafting method to modify and adopt ISO 22514-5.2019 "Statistical Method Capability and Performance in Process Management No. 5
Part. Process Capability and Performance Estimation of Counting Characteristics.
Compared with ISO 22514-5.2019, this part has the following structural adjustments.
--- Divide Chapter 4 into 4.1 symbols and 4.2 abbreviations.
The technical differences between this part and ISO 22514-5.2019 and the reasons are as follows.
---Regarding normative reference documents, this section has made adjustments with technical differences. The adjustments are specifically reflected in Chapter 2 "Regulations"
The specific adjustments are as follows.
● Replace ISO 3534-2 with GB/T 3358.2, which is equivalent to the international standard (see Chapter 3);
---In Chapter 4, the symbol "np" is added and defined as "the average number of unqualified products in the subgroup", which is more accurate;
---The definition of the symbol "p" in Chapter 4 is revised to "overall nonconforming product rate", which is more accurate;
--- In Chapter 4, the symbol "u" is modified to be defined as "the number of unqualified products per unit", which is more accurate;
--- The definition of count data in 5.1 is revised to "indicating whether each individual in the subgroup examined by the record has a certain characteristic (or characteristic)
Levy), calculate the number of individuals with this characteristic, or record the occurrence of such an event in a unit product, a group of products, or a certain area.
The observed value obtained by the number of births, that is, the number of units with a certain attribute or the frequency of occurrence of the characteristic", is more accurate;
---Change "based on one of the four different control charts" in 5.1 to "the number of unqualified items can be monitored using chart c, and the unit product is not compatible
The number of grids can be monitored by u chart, the number of nonconforming products can be monitored by np chart, and the rate of nonconforming products can be monitored by p chart", change
For clearer description;
--- Modify the "use c and u diagrams for the number of nonconforming products, use np and p diagrams for the number of nonconforming products" in 5.3 to "use the number of nonconformances
In figure c, use u figure for the number of unqualified products per unit, use np figure for the number of unqualified products, and use p figure for the rate of unqualified products", change to clear
Clear description;
--- Modify the vertical axis data of Figure 2 and modify the original text error;
--- Change the "p*p, p" in 7.1
pkL
And p*pkU" changed to "p
p, p
pk, p
pkL
And p*pkU", increase p
pk is more accurate;
---The formula (8) "QP-1.96
QP(1-p)
n ≤ QP < QP 1.96
QP(1-p)
"To
"QP-1.96
QP(1-QP)
m ≤QP≤QP 1.96
QP(1-QP)
", modify the original symbol error;
--- Change "z1-p=2.438" in 7.2 to "2.176≤z1-QP< ∞", modify the original calculation and symbol errors;
---In 7.2 "
2.438
3 ≤P
pk≤
3→0.81≤P
pk< ∞" is changed to "
2.176
3 ≤P
pk≤
3→0.725≤P
pk< ∞ ”, modify
The calculation and notation of the original text are wrong;
---In Chapter 8, "C*pk, C
pkU
And C*pkL" to "C
p, C
pk, C
pkL
, C*pkU", increase C
pk is more accurate;
---The formula (15) in Chapter 8 "C*pk=
z1-pM
"Amended to "C*pk=
z1-pM
";
--- Change "where z1-p is the quantile of the standard normal distribution of pM" in Chapter 8 to "where z1-pM is the standard normal distribution
pM quantile", modify the original text symbol error.
This section has made the following editorial changes.
---Revised the standard name to "Statistical Methods for Production Process Capability and Performance Monitoring Part 5.Process Capability and Performance of Counting Characteristics"
Can estimate";
--- Modified the description of the scope of application of this section;
--- Amend "ISO 7870-2" in the title of Figure 1 to "GB/T 17989.2";
---Added in 5.3 "Note. The cumulative graph of the number of unqualified products per 100 units means that as the number of subgroups increases, based on all samples currently collected
The number of unqualified products per hundred units in this calculation";
--- Change the "average number of unqualified products per hundred units" in the "Explanation" of Figure 2 to "the number of unqualified products per hundred units based on all samples"
Number of cells";
--- Change the "Lower Confidence Limit" in the "Explanation" of Figure 3 to "Upper Confidence Limit";
--- Change the "Confidence Interval Curve" in the "Explanation" of Figure 3 to "Confidence Upper Limit Curve";
--- Change "PCI confidence interval can be obtained using formula (10)" in 7.2 to "PCI confidence interval can be obtained using formula (8)";
---Added table number and table title;
---Revised references.
This part is proposed and managed by the National Standardization Technical Committee for the Application of Statistical Methods (SAC/TC21).
Drafting organizations of this section. Qingdao University, Inner Mongolia Mengniu Dairy (Group) Co., Ltd., China National Institute of Standardization, Shanxi Huhua Group
Group Co., Ltd., Huzhou Rongke Building Material Technology Co., Ltd., Huzhou Mingfeng Enterprise Management Consulting Co., Ltd., Zhongtong Bus Holding Co., Ltd.
Co., Ltd., Liaocheng Zhuoqun Auto Parts Co., Ltd., Hangzhou Kuangxin Technology Co., Ltd.
The main drafters of this section. Li Lili, Zhang Xuan, Song Xiaodong, Lin Limin, Zhang Fan, Zhao Jing, Ding Lihui, Qian Xinhui, Yang Liping, Wu Guangyu,
Dong Jun.
Introduction
The methods described in this section are intended to assist agencies or organizations in evaluating the capabilities and performance of their main processes based on counting characteristics.
It is necessary for an organization or institution to use process capability and performance to evaluate the capability and performance of a supplier's production process.
The developed process capability and process performance index contribute to this work.
Statistical methods for production process capability and performance monitoring
Part 5.Process capability and counting characteristics
Performance estimation
1 Scope
This part of GB/T 40681 gives the calculation method of the process capability and performance index of the counting characteristic in the common production process.
This section applies to the process capability and performance evaluation of counting characteristics in common production processes.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 3358.2 Statistics Vocabulary and Symbols Part 2.Applied Statistics (GB/T 3358.2-2009, ISO 3534-2.2006,
IDT)
3 Terms and definitions
The terms and definitions defined in GB/T 3358.2 apply to this document.
4 Symbols and abbreviations
4.1 Symbols
The following symbols apply to this document.
c Average number of subgroup failures
C*p, C
pk, C
pkL
, C*pkU Process Capability Index
n subgroup size
np average number of sub-group defective products
p Overall non-conforming product rate
Non-conforming product rate on pU
Rate of unqualified products under pL
QP process quality level
P*p, P
pk, P
pkL
, P*pkU process performance index
u The number of unqualified products per unit
zα Lower α quantile of standard normal distribution
4.2 Abbreviations
The following abbreviations apply to this document.
FRC. first runcapability
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40681.5-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40681.5-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 40681.5-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40681.5-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|