HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 39956.2-2021 English PDF

US$494.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39956.2-2021: (Pneumatic electro-pneumatic pressure control valve - Part 2: Test method for evaluating the main characteristics that should be included in commercial documents)
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 39956.2-2021English494 Add to Cart 4 days [Need to translate] (Pneumatic electro-pneumatic pressure control valve - Part 2: Test method for evaluating the main characteristics that should be included in commercial documents) Valid GB/T 39956.2-2021

PDF similar to GB/T 39956.2-2021


Standard similar to GB/T 39956.2-2021

GB/T 42155   GB/T 40565.4   GB/T 40565.2   GB/T 39949.1   GB/T 39949.2   GB/T 39956.1   

Basic data

Standard ID GB/T 39956.2-2021 (GB/T39956.2-2021)
Description (Translated English) (Pneumatic electro-pneumatic pressure control valve - Part 2: Test method for evaluating the main characteristics that should be included in commercial documents)
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Word Count Estimation 26,251
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 39956.2-2021: (Pneumatic electro-pneumatic pressure control valve - Part 2: Test method for evaluating the main characteristics that should be included in commercial documents)


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Pneumatic electro-pneumatic pressure control valve - Part 2.Test method for evaluating the main characteristics that should be included in commercial documents) ICS 23.100.50 CCSJ20 National Standards of People's Republic of China Pneumatic electro-pneumatic pressure control valve Part 2.Assess what should be included in the business document Test methods for main characteristics (ISO 10094-2.2010, IDT) Released on 2021-03-09 2021-10-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Symbols and units 1 5 Test conditions 2 6 Test procedure 3 7 Electric signal-pressure characteristic test when the forward flow or overflow flow is zero 8 Flow-pressure characteristic test 9 9 Pressure regulation characteristic test 12 10 Leakage during zero forward flow or overflow flow characteristic test 12 11 Dynamic characteristics 13 12 Presentation of test results 17 Appendix A (informative) Calculation procedures for gain and phase lag 19 References 23

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 2 of GB/T 39956 "Pneumatic Electric-Pneumatic Pressure Control Valve". GB/T 39956 has released the following section. ---Part 1.The main characteristics that should be included in the business document; ---Part 2.Test methods to assess the main characteristics that should be included in the business documents. The translation method used in this document is equivalent to ISO 10094-2.2010 "Pneumatic Electro-Pneumatic Pressure Control Valve Part 2.Evaluation of Business Documents" Test methods for the main characteristics that should be included in the document. The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 14513.1-2017 Determination of flow characteristics of compressible fluid components used in pneumatics Part 1.Steady-state flow General rules and test methods (ISO 6358-1.2013, IDT) ---GB/T 17446-2012 Fluid Power System and Components Vocabulary (ISO 5598.2008, IDT) ---GB/T 20081.1-2006 Pneumatic pressure reducing valve and filter pressure reducing valve Part 1.Main features that should be included in commercial documents Sex and product identification requirements (ISO 6953-1.2000, IDT) This document has made the following editorial changes. ---Corrected a few editorial errors in ISO 10094-2.2010, and changed "Δp1" in the formula of 7.3.2 to "L"; changed the formula in 7.3.3 "Δph" is changed to "H"; the "p2" in the formula of 8.4.4.1 is changed to "p2r". Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3). Drafting organizations of this document. Ningbo Sono Industrial Automatic Control Equipment Co., Ltd., Xingyu Electronics (Ningbo) Co., Ltd., Anhui Rongda Valve Co., Ltd. Company, Zhejiang Yiri Pneumatic Technology Co., Ltd., Xiamen Chengcan Industrial Equipment Co., Ltd., National Pneumatic Product Quality Supervision and Inspection Center, Guangdong Yanfei Technology Co., Ltd., Guangdong Xinruan Technology Co., Ltd., Beijing Machinery Industry Automation Research Institute Co., Ltd. The main drafters of this document. Mao Xinqiang, Wang Jizhou, Cao Jianbo, Ren Cheli, Xu Linbin, Hu Guangrong, Pi Fengmei, Yang Lingling, Wang Lianfen, Cao Qiaohui.

Introduction

In a pneumatic system, power is transmitted and controlled by compressed air in the loop. When it needs to be precise according to the variable pressure setting When adjusting the pressure accurately, an electro-pneumatic pressure control valve can be used. These control valves can continuously adjust the air supply pressure of the system in response to the Continue the input electrical signal, and the input electrical signal value is proportional to the pressure value. Therefore, it is necessary to understand the characteristics of these electric-pneumatic pressure control valves. Performance characteristics to determine its applicability. GB/T 39956 consists of two parts. ---Part 1.The main features that should be included in the business documents. The purpose is to specify the electrical-pneumatic pressure control that should be included in business documents. The main characteristics of the control valve. ---Part 2.Test methods to assess the main characteristics that should be included in the business documents. The purpose is to stipulate in accordance with GB/T 39956.1 The test method and parameter expression of the main characteristics of the electric-pneumatic pressure control valve required in the evaluation business document the way. Pneumatic electro-pneumatic pressure control valve Part 2.Assess what should be included in the business document Test methods for main characteristics

1 Scope

This document specifies the test methods and parameter expressions for the main characteristics that should be included in the evaluation business documents. The purpose of this document. ---By standardizing test methods and verifying the expression of test results, it is convenient for comparison and analysis; ---Contribute to the correct application of components in pneumatic systems. The prescribed test aims to compare different types of pressure control valves, not a production test for every finished product. Note 1.The test of non-electrically modulated pneumatic pressure control valve is specified in ISO 6953-2. Note 2.The electrical-pneumatic flow control valve test is specified in ISO 10041-2. Note 3.This document applies to components with a vent to the atmosphere.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. GB/T 39956.1-2021 Pneumatic electro-pneumatic pressure control valve Part 1.Main characteristics that should be included in business documents (ISO 10094-1.2010, IDT) ISO 5598 Fluid power systems and components-Vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 6358-1 Determination of flow characteristics of compressible fluid components used in pneumatics. Part 1.General rules and tests for steady-state flow Test method (Pneumaticfluidpower-Determinationofflow-ratecharacteristicsofcomponentsusingcom- pressiblefluids-Part 1.Generalrulesandtestmethodsforsteady-stateflow) ISO 6953-1 Pneumatic pressure reducing valve and filter pressure reducing valve Part 1.Main characteristics and product identification to be included in commercial documents Requirements (Pneumaticfluidpower-Compressedairpressureregulatorsandfilter-regulators-Part 1.Main characteristicstobeincludedinliteraturefromsuppliersandproduct-markingrequirements)

3 Terms and definitions

The terms and definitions defined in ISO 5598, ISO 6953-1 and GB/T 39956.1 apply to this document.

4 Symbols and units

The following symbols and units apply to this document, see Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39956.2-2021_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39956.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39956.2-2021_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39956.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.