| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39483.2-2020 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Rubber and plastics injection moulding machine - Interface - Part 2: Data exchange interface
| Valid |
GB/T 39483.2-2020
|
PDF similar to GB/T 39483.2-2020
Basic data | Standard ID | GB/T 39483.2-2020 (GB/T39483.2-2020) | | Description (Translated English) | Rubber and plastics injection moulding machine - Interface - Part 2: Data exchange interface | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G95 | | Classification of International Standard | 71.120; 83.200 | | Word Count Estimation | 354,399 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-11-01 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39483.2-2020: Rubber and plastics injection moulding machine - Interface - Part 2: Data exchange interface
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Rubber Plastic Injection Molding Machine Interface Part 2: Data Exchange Interface)
ICS 71:120;83:200
G95
National Standards of People's Republic of China
Rubber plastic injection molding machine interface
Part 2: Data Exchange Interface
2020-12-14 release
2021-11-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
1 Scope 1
2 Normative references 1
3 Terms, definitions and abbreviations 1
3:1 Terms and definitions 1
3:2 Abbreviations 7
4 Basic agreement 8
4:1 Modbus 8
4:1:1 General overview 8
4:1:2 General Specification 9
4:2 OPCDA 14
4:2:1 Basic Principles of Data Access 14
4:2:2 Overview of OPC 14
4:2:3 OPCDA scope of application 16
4:2:4 General OPCDA architecture and composition 16
4:2:5 Companion specification of OPCDA data access architecture 17
4:2:6 Overview of objects and interfaces 17
4:2:7 Server address space and configuration 18
4:2:8 Application-level server and network node selection 19
4:2:9 Synchronization and serial issues 19
4:2:10 Permanent storage process 19
4:3 OPCUA 19
4:3:1 OPCUA Basic Protocol 19
4:3:2 OPCUA common data type 20
5 Data interface 84
5:1 MES interface 84
5:1:1 OPCDA MES interface 84
5:1:2 OPCUA's MES interface 125
5:2 Peripheral device interface 139
5:2:1 Mold temperature controller interface 139
5:2:2 Chiller interface 171
5:2:3 Feeder interface 187
5:2:4 Dryer interface:199
5:2:5 Manipulator interface 212
5:2:6 Magnetic template interface 253
5:2:7 Die changer interface 264
5:2:8 Hot runner device interface 277
5:2:9 LSR feeding system interface 298
5:2:10 Energy consumption meter interface 314
5:2:11 Two-color machine turntable interface 332
Appendix A (informative appendix) OPCDA data type 344
Appendix B (informative appendix) OPCUA data type 346
Foreword
GB/T 39483 "Rubber Plastic Injection Molding Machine Interface" is divided into two parts:
---Part 1: Mechanical and electrical interface;
---Part 2: Data exchange interface:
This part is Part 2 of GB/T 39483:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
This part was proposed by the China Petroleum and Chemical Industry Federation:
This part is under the jurisdiction of the National Rubber and Plastic Machinery Standardization Technical Committee (SAC/TC71):
Drafting organizations of this section: Haitian Plastic Machinery Group Co:, Ltd:, Borch Intelligent Equipment Co:, Ltd:, Guangdong Yizumi Precision Injection Technology
Co:, Ltd:, Yuyao Huatai Rubber and Plastic Machinery Co:, Ltd:, Tairui Machinery Co:, Ltd:, Donghua Machinery Co:, Ltd:, Ningbo Lijin Machinery Co:, Ltd:
Company, Ningbo Haixing Machinery Manufacturing Co:, Ltd:, Beijing Rubber Industry Research and Design Institute Co:, Ltd:, National Plastic Machinery Product Quality Supervision and Inspection
Inspection Center, China Plastic Machinery Industry Association:
The main drafters of this section: Jiao Xiaolong, Zhuo Hongzhi, Huang Turong, Niu Jianwen, Ge Fujiong, Wei Jianhong, Yan Houming, Shi Zeman, Chen Kaiding,
He Cheng, Wang Gengxin, Zheng Ji, Li Chunyan:
Rubber plastic injection molding machine interface
Part 2: Data Exchange Interface
1 Scope
This part of GB/T 39483 specifies the basic protocol and data interface for rubber plastic injection molding machines, covering the following content:
---Terms, definitions and abbreviations:
---Basic protocol, including Modbus basic protocol, OPCDA basic protocol, OPCUA basic protocol and general data
Types of:
---Data interface, including data interface between injection molding machine and MES based on OPCDA basic protocol; OPC
Data interface between injection molding machine and MES based on UA basic protocol; Note based on Modbus basic protocol
Data interface between injection molding machine and peripheral device; injection molding machine and peripheral device based on OPCUA basic protocol
Data interface between: Peripheral devices include mold temperature controller, chiller, feeder, dryer, manipulator, magnetic template, mold changer,
Hot runner device, LSR (liquid silica gel) feeding system, energy consumption meter, two-color machine turntable:
This section applies to all types of rubber plastic injection molding machines:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 19582:2 Industrial automation network specification based on Modbus protocol Part 2: Modbus protocol in serial link
Implementation guide on
GB/T 19582:3 Industrial automation network specification based on Modbus protocol Part 3: Modbus protocol in TCP/IP
Implementation guide on
GB/T 33863:1 OPC Unified Architecture Part 1: Overview and Concepts
GB/T 33863:2-2017 OPC Unified Architecture Part 2: Security Model
GB/T 33863:3 OPC Unified Architecture Part 3: Address Space Model
GB/T 33863:4 OPC Unified Architecture Part 4: Service
GB/T 33863:5 OPC Unified Architecture Part 5: Information Model
GB/T 33863:6 OPC Unified Architecture Part 6: Mapping
GB/T 33863:7 OPC Unified Architecture Part 7: Profile
GB/T 33863:8 OPC Unified Architecture Part 8: Data Access
3 Terms, definitions and abbreviations
3:1 Terms and definitions
The terms and definitions defined in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 and the following terms and definitions apply to this document: for
For ease of use, some terms and definitions in GB/T 33863:1~GB/T 33863:8 and GB/T 19582:2 are repeatedly listed below:
|