|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38758-2020: Pneumatic fluid power - Rules of non-ferrous metallic cylinder body
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38758-2020 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Pneumatic fluid power - Rules of non-ferrous metallic cylinder body
| Valid |
GB/T 38758-2020
|
PDF similar to GB/T 38758-2020
Basic data | Standard ID | GB/T 38758-2020 (GB/T38758-2020) | | Description (Translated English) | Pneumatic fluid power - Rules of non-ferrous metallic cylinder body | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J20 | | Classification of International Standard | 23.100.20 | | Word Count Estimation | 10,130 | | Date of Issue | 2020-04-28 | | Date of Implementation | 2020-11-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38758-2020: Pneumatic fluid power - Rules of non-ferrous metallic cylinder body---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic fluid power--Rules of non-ferrous metallic cylinder body
ICS 23.100.20
J20
National Standards of People's Republic of China
Pneumatic non-ferrous metal cylinder technical requirements
(ISO 6537.1982, Pneumaticfluidpowersystems-Cylinderbarrels-
2020-04-28 release
2020-11-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Symbol 1
5 Manufacture of cylinders 2
6 Pressure 2
7 Temperature 2
8 Tolerance 2
9 Surface roughness 4
10 Protection and packaging 4
11 Order 4
12 Marking instructions (quoting this standard) 4
Appendix A (Normative Appendix) Non-ferrous metal cylinder bore size and tolerance 5
Appendix B (Normative Appendix) Ordering Requirements 7
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafting method to modify and adopt ISO 6537.1982 "Pneumatic cylinder requirements for non-ferrous metal pipes".
The technical differences between this standard and ISO 6537.1982 and the reasons are as follows.
--- With regard to normative quotation documents, this standard has been adjusted with technical differences to adapt to my country's technical conditions and adjustments
The situation is reflected in Chapter 2 "Regulatory Reference Documents", with specific adjustments as follows.
● Replace ISO 286-1 (see 8.1.1) with GB/T 1800.1 modified to adopt international standards;
● Replace ISO 5598 with GB/T 17446 equivalent to international standards (see Chapter 3);
● Added reference to GB/T 1031 (see 9.1.1);
● Added reference to GB/T 2346 (see 6.1);
● Deleted ISO 468 cited in ISO 6537.1982 (see Chapter 4 and 9.1.1 of ISO 6537.1982)
● Deleted ISO 3322 cited by ISO 6537.1982 (see 6.1 of ISO 6537.1982);
--- Modify the maximum height symbol of the outline, according to the provisions of GB/T 1031-2009, change Rma to Rz (see Chapter 4);
--- Increase the maximum working temperature from 100 ℃ to 120 ℃ to meet the current technical requirements (see Chapter 7);
--- In order to adapt to the current technical requirements and improve the accuracy requirements, the inner diameter tolerance level was modified (see 8.1.1 and Appendix A, Table A.1 and
Table A.2);
--- Change "maintain outer diameter tolerance" to "adjust outer diameter tolerance", because the inner hole roughness and inner diameter tolerance have relevant requirements, so according to the needs
The outer diameter tolerance should be adjusted (see 8.2.2);
--- Because the straightness of the inner hole is an important indicator, the "straightness" is changed to "the straightness of the inner hole", which is also based on GB/T 11336-2004
Added straightness measurement method (see 8.3.1);
--- Adapt to the current technical requirements, improve the accuracy requirements, and modify the surface roughness value (see Table 3);
--- Change "test report" to "order", unify the original test certification and logo description as "order", and modify and add requirements
To meet current technical requirements (see Chapter 11);
--- Increase the instructions for recommended wall thickness to ensure the safety of the cylinder at the minimum wall thickness (see Table A.1 and Table A.2);
--- Modified the ordering method and added the "Cylinder Shape Requirements" and "Cylinder Inner Hole Roughness Requirements" to meet the current technical requirements
(See Appendix B).
For ease of use, the following editorial changes have been made to this standard.
--- Change the standard name to "Technical Requirements for Pneumatic Nonferrous Metal Cylinder".
This standard was proposed by the China National Machinery Industry Federation.
This standard is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3).
This standard was drafted by. Yueqing Hengyi Pneumatic Co., Ltd., Zhejiang Yiri Pneumatic Technology Co., Ltd., Ningbo Jiaerling Machinery Co., Ltd.
Division, Ningbo Sono Industrial Automatic Control Equipment Co., Ltd., National Pneumatic Product Quality Supervision and Inspection Center, Yantai Future Automatic Equipment Co., Ltd.
Division, Zhejiang Xingchen Pneumatic Co., Ltd., Xingyu Electronics (Ningbo) Co., Ltd.
The main drafters of this standard. Zhu Lefei, Yu Jinze, Ren Cheli, Shan Junbo, Mao Xinqiang, Guo Lili, Guo Xuejing, Lin Xinghu, Cao Jianbo.
Introduction
In pneumatic systems, power is transmitted and controlled by compressed air in a closed loop.
The cylinder is a device that converts gas energy into mechanical energy and realizes linear motion. The cylinder consists of a cylinder barrel and a piston and piston moving in it
Rod and other components.
In most applications, the outer diameter and wall thickness of the tube are specified. But for the cylinder, consider the reason for the output force and pressure level,
The inner diameter and wall thickness of the cylinder are very important.
Pneumatic non-ferrous metal cylinder technical requirements
1 Scope
This standard specifies the mechanical properties, dimensional tolerances, surface roughness and technical requirements of cylinder cylinders made of non-ferrous metal tubes.
This standard is applicable to round seamless or welded after the tensile stress has been eliminated or fully heat-treated, and the inner hole has been specially processed with or without chipping.
Connected to non-ferrous metal cylinders, it is also suitable for special-shaped cylinders with round inner holes.
Note. This standard is mainly for brass alloy and aluminum alloy materials, but not limited to such materials.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 1031 Product Geometric Technical Specification (GPS) Surface Structure Profile Method Surface Roughness Parameters and Values
GB/T 1800.1 Geometrical Product Specifications (GPS) Limits and Fittings Part 1.Tolerances, Deviations and Fitting Basis
(GB/T 1800.1-2009, ISO 286-1.1988, MOD)
GB/T 2346 Nominal pressure series of fluid transmission systems and components (GB/T 2346-2003, ISO 2944..2000, MOD)
GB/T 17446 Glossary of fluid transmission systems and components (GB/T 17446-2012, ISO 5598..2008, IDT)
3 Terms and definitions
The terms and definitions defined in GB/T 17446 apply to this document.
4 Symbol
The following symbols apply to this document.
A --- gauge length (5.65 So) elongation after break;
α --- the nominal wall thickness of the cylinder;
D --- the nominal outer diameter of the cylinder;
d --- the nominal inner diameter of the cylinder;
L --- length;
Ra --- arithmetic mean deviation of contour;
ReL --- Lower yield strength (only for aluminum alloy);
Rm --- tensile strength;
Rp0.2 --- 0.2% elongation strength (this value is only used when the yield stress is not obvious);
Rz --- the maximum height of the contour;
So --- original cross-sectional area.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38758-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 38758-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 38758-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38758-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|