|
US$94.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38363.1-2019: Tools for pressing -- Guide devices -- Part 1: Types of guide pillar
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 38363.1-2019 | English | 94 |
Add to Cart
|
3 days [Need to translate]
|
Tools for pressing -- Guide devices -- Part 1: Types of guide pillar
| Valid |
GB/T 38363.1-2019
|
PDF similar to GB/T 38363.1-2019
Basic data | Standard ID | GB/T 38363.1-2019 (GB/T38363.1-2019) | | Description (Translated English) | Tools for pressing -- Guide devices -- Part 1: Types of guide pillar | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.10 | | Word Count Estimation | 4,438 | | Date of Issue | 2019-12-31 | | Date of Implementation | 2019-12-31 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 38363.1-2019: Tools for pressing -- Guide devices -- Part 1: Types of guide pillar---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tools for pressing-Guide devices-Part 1. Types of guide pillar
ICS 25.120.10
J46
National Standards of People's Republic of China
Die guides. Part 1. Guide post structure
2019-12-31 release
2019-12-31 implementation
State Administration of Market Supervision
Published by the National Standardization Administration
Foreword
GB/T 38363 "Die Guide" is divided into two parts.
--- Part 1. Guide post structure type;
--- Part 2. Guide bushing structure type.
This part is the first part of GB/T 38363.
This section is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the redrafting method to modify and adopt ISO 9182-1..2013 "Punch Die Guide Part 1. Structural Type".
This section has technical differences compared to ISO 9182-1..2013, and the terms related to these differences have passed through the margins on the outside
The vertical single line (︱) of the position is marked. The corresponding technical differences and their causes are as follows.
--- In "2 Structural Types and Installation Methods", "the specific dimensions of guide pillars of different structural types can be found in the corresponding part of ISO 9448"
To "the specific dimensions of different types of guide pillars see the corresponding national standards and industry standards";
--- In Figure 1, the guide post structure type "g) E-head guide post" is added, which is a common guide post type;
--- Figure 1f), "the setting of screw holes is determined by the manufacturer", the die guide post type "with flange end locking guide post (without screw
Nail hole) "into the ISO standard" flange end locking guide post (with screw hole) "type.
The following editorial changes have been made in this section.
--- Modify the standard name to "Die Guide Device Part 1. Guide Post Structure Type";
--- "1 Scope", added the standard scope of application "this section applies to die guide column";
--- "" 2 structure type, installation method and size "is modified to" 2 structure type and installation method ", Figures 1 and 2 are schematic diagrams,
Does not involve size;
--- In Figure 1, the sub-picture number has been added to each sub-picture;
--- In Figure 2, the mark "1" was changed to footnote "a", and "a guide post end can be rounded" was added.
This part is proposed and managed by the National Mold Standardization Technical Committee (SAC/TC33).
This section was drafted. Xiangxin Technology Co., Ltd., Youde Precision Industry (Kunshan) Co., Ltd., Luzhou Liantao Electronics Co., Ltd.
Company, East China Jiaotong University, Hubei Sanhuan Forging Co., Ltd., Shenzhen Yihe Precision Technology Group Co., Ltd., SAIC-GM-Wuling Automotive Co., Ltd.
Co., Ltd. Chongqing Branch, Dongguan Zhenliang Hardware Technology Co., Ltd., Xiamen Leader Electronic Technology Co., Ltd., Xi'an Nuofang
Information Technology Co., Ltd., Xiamen Wanming Electronics Co., Ltd., Yiwu Quanyi Mould Industry Development Co., Ltd., Xiamen Kunjin Electronic Technology Co., Ltd.
Co., Ltd., Xi'an Xumai Intelligent Appliance Technology Co., Ltd., Xiamen Meike Security Technology Co., Ltd., Xi'an Libei'an Intelligent Technology Co., Ltd.,
Xiamen Maxtop Electronics Co., Ltd., Guilin Electric Appliance Research Institute Co., Ltd.
The main drafters of this section. Liu Jinjun, Tao Yu, Zhang Mingchao, Huang Zhichao, Zhang Hongtao, Zhou Zhiyong, Huang Jing, Zhou Fupeng, Yang Jiahua, Meng Juan,
Huang Wei, Ruan Guoyong, Li Bin, Huang Chunsun, Guo Zhenfeng, Jiang Donghong, Marina, Huang Jingming, Jin Chenggao, Huang Shufu, Lan Xinhua, Zhang Li, Chen Hongsheng.
Die guides. Part 1. Guide post structure
1 Scope
This section of GB/T 38363 illustrates the structural types of 5 common guide post types.
This section applies to die guides.
2 Structure type and installation method
The guide post in Figure 1 is only an example of the structure type, and does not affect the design of the manufacturer.
For the specific dimensions of different structure types of guide posts, see the corresponding national standards and industry standards. Figure 2 shows another version of the end of the guide post.
a) Type A1 straight guide post b) Type A2 snap ring end locking straight guide post
c) Type B1 end locking guide d) Type B2 end locking guide with lubrication groove
Figure 1 Guide post structure
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38363.1-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 38363.1-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 38363.1-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38363.1-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|