HOME   Cart(4)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 37782-2019 English PDF

US$378.00 ยท In stock
Delivery: <= 1 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37782-2019: Metallic materials - Indentation test - Determination of strength, hardness and stress-strain curve
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 37782-2019English378 Add to Cart 1 days [Need to translate] Metallic materials - Indentation test - Determination of strength, hardness and stress-strain curve Valid GB/T 37782-2019

PDF similar to GB/T 37782-2019


Standard similar to GB/T 37782-2019

GB/T 38684   GB/T 36915   GB/T 37306.2   GB/T 45169   GB/T 37783   

Basic data

Standard ID GB/T 37782-2019 (GB/T37782-2019)
Description (Translated English) Metallic materials - Indentation test - Determination of strength, hardness and stress-strain curve
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H22
Classification of International Standard 77.040.10
Word Count Estimation 26,298
Date of Issue 2019-08-30
Date of Implementation 2020-07-01
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 37782-2019: Metallic materials - Indentation test - Determination of strength, hardness and stress-strain curve


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic materials - Indentation test - Determination of strength, hardness and stress-strain curve ICS 77.040.10 H22 National Standards of People's Republic of China Metal material is pressed into the test strength, hardness and Determination of stress-strain curve Published on.2019-08-30 2020-07-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 symbols and instructions 2 5 Test principle 3 6 Test equipment 4 7 sample 5 8 Test conditions 5 9 Test procedure 5 10 Validity of test results 9 11 Test report 10 Appendix A (Normative) Daily verification of test equipment 11 Appendix B (Normative Appendix) Reference Sample 12 Appendix C (informative) Strength, hardness and stress-strain curve indentation test example 13 Reference 20

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). This standard was drafted. Southwest Jiaotong University, Metallurgical Industry Information Standards Institute, Chengdu Weili Tes Technology Co., Ltd., Shenyang Aircraft Industrial (Group) Co., Ltd., Baoshan Iron and Steel Co., Ltd., Guohe General Testing and Certification Co., Ltd., China Aerospace Beijing Aviation Materials Materials Research Institute. The main drafters of this standard. Cai Lixun, Bao Chen, Chen Hui, Dong Li, Li Rongfeng, Liu Xiaokun, Yu Nanyang, Jin Dongyan, Fang Jian, Li Wei, Hu Benrun.

Introduction

The existing instrumented indentation test method is based on the real-time measurement of the pressing force and depth, and realizes the hardness and elastic modulus of the metal material. The material parameters were determined, but the stress-strain curve could not be determined. Based on this standard, the stress-strain curve of the uniform deformation stage can be entered. Effective characterization [2-4], at the same time in the test principle, test methods, data processing and other aspects of the specification, mainly reflected in. --- Based on the indentation test force-depth real-time measurement curve, the elastic modulus of the material to be tested can be obtained by the established mechanical model, Tensile strength, hardness and stress-strain curve; --- to achieve conversion between Brinell, Rockwell, Vickers hardness; --- Realize the conversion between tensile strength and Brinell, Rockwell and Vickers hardness. This standard provides a stress-strain curve for determining the elastic modulus, tensile strength, Rockwell hardness and uniform deformation of metallic materials. Indentation test method. Metal material is pressed into the test strength, hardness and Determination of stress-strain curve

1 Scope

This standard specifies the test principle and test design for determining the elastic modulus, tensile strength, hardness and stress-strain curve of metal materials by indentation method. Preparation, samples, test conditions, test procedures, validity of test results and test reports. This standard applies to the elastic modulus of metal materials with homogeneous exponential characteristics (power exponent constant) for homogeneous, isotropic and tensile hardening laws. Determination of the stress-strain curve of the amount, tensile strength, Rockwell hardness and uniform deformation stage, conversion between tensile strength and hardness, and cloth Conversion between hardness, Rockwell hardness and Vickers hardness. Note. When used to determine the stress-strain curve of a metal material with a significant yielding platform or exhibiting linear hardening, the resulting test results may be larger. error.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 228.1 tensile testing of metallic materials - Part 1 GB/T 7997 Hardmetal Vickers Hardness Test Method GB/T 10623 Metallic material mechanical properties test terminology GB/T 21838.1 Metallic materials - Determination of hardness and material parameters - Part 1 . Test methods GB/T 21838.2 Metallic materials - Determination of hardness and material parameters - Part 2. Examination and calibration of test machines JJG139 Tension, Pressure and Universal Testing Machine Verification Procedure

3 Terms and definitions

The following terms and definitions as defined in GB/T 10623, GB/T 21838.1 and GB/T 21838.2 apply to this document. 3.1 Force-depth curve A curve between the force applied to the indenter and the depth at which the indenter is pressed vertically into the surface of the material. Note. The force-depth curve is derived from the data acquired during the load-unload process. A typical force-depth curve is shown in Figure 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37782-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37782-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically in 24 hours. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37782-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37782-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.