|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37547-2019: Classification and code of waste plastics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37547-2019 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Classification and code of waste plastics
| Valid |
GB/T 37547-2019
|
PDF similar to GB/T 37547-2019
Basic data | Standard ID | GB/T 37547-2019 (GB/T37547-2019) | | Description (Translated English) | Classification and code of waste plastics | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Z04 | | Classification of International Standard | 13.020.10 | | Word Count Estimation | 10,182 | | Date of Issue | 2019-08-30 | | Date of Implementation | 2019-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37547-2019: Classification and code of waste plastics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Classification and code of waste plastics
ICS 13.020.10
Z04
National Standards of People's Republic of China
Waste plastic classification and code
Published on.2019-08-30
2019-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Product Recycling Foundation and Management Standardization Technical Committee (SAC/TC415).
This standard was drafted. China Academy of Environmental Sciences, China National Institute of Standardization, China Materials Recycling Association, Tianjin University of Technology, China
Guogezhouba Group Green Park Technology Co., Ltd., Suzhou Qianlong Recycling Technology Co., Ltd., Longfu Huaneng Technology Co., Ltd., Shenzhen
Green Ring Renewable Resources Development Co., Ltd., Zhejiang Jiatianhe Environmental Protection Technology Co., Ltd., Zhejiang Earth Pipe Industry Co., Ltd., Henan Shunxiang Chemical Fiber
Co., Ltd., Shandong Pengzhou Plastic Industry Co., Ltd., Shanghai Yingke Industrial Co., Ltd., Wuxi Diageman Environmental Protection Technology Co., Ltd., Lianyungang
Longshun Plastic Co., Ltd., Shanghai Tianqiang Environmental Protection Technology Co., Ltd.
The main drafters of this standard. Guo Yuwen, Gao Dongfeng, Cui Yan, Hu Wei, Qiao Qi, Qi Jiuli, Bi Yingying, Lin Yi, Fu Yun, Zhu Yi, Yang Wei, Zhao Yuying,
Wang Xiuteng, Liu Qiang, Luo Yan, Li Xiao, Guo Chengzhou, Liu Lijun, Li Xuning, Tang Linmei, Wang Yaocun, Wu Yang, Zhou Yanming, Shi Xiaoling, Lu Weiwen, Fan Lubin,
Cong Weiwei, Li Zhijie, Wang Xiaobing, Wang Yonggang, Fan Yushun, Hu Xichao.
Waste plastic classification and code
1 Scope
This standard specifies the classification and classification methods, coding rules and code structure, classification and code, classification and quality requirements of waste plastics.
This standard applies to the broken pieces of various plastic products and plastic materials that have been discarded.
This standard does not apply to waste plastic alloys and waste plastics listed in the National Hazardous Waste List.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Plastics -- Determination of density of non-foam plastics -- Part 2. Density gradient column method
Determination of tensile properties of plastics - Part 2. Test conditions for moulding and extruded plastics
GB/T 1843 Determination of impact strength of plastic cantilever beam
GB/T 2035 plastic terminology and its definition
GB/T 3682.1-2018 Plastic thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR)
Determination of Part 1. Standard methods
GB/T 6284 General method for moisture determination in chemical products - Dry reduction method
GB/T 9341 Determination of bending properties of plastics
GB/T 9345.1-2008 Determination of ash - Part 1. General method
GB/T 9345.5 Determination of ash - Part 5. Polyvinylchloride
GB/T 14190-2017 Fiber grade polyester (PET) section test method
GB/T 27610 Waste product classification and code
GB/T 35173-2017 Polyethylene terephthalate (PET) plastic recycling materials characterization characteristics and detection methods
GB/T 35773 Evaluation of the odor of packaging materials and products
FZ/T 51008-2014 Recycled Polyester (PET) Bottle
3 Terms and definitions
The following terms and definitions as defined in GB/T 2035 apply to this document.
3.1
Waste plastic wasteplastics
Abandoned various plastic products and plastic materials, including scraps and edges generated during the production and processing of plastic raw materials and plastic products.
Corners and defective products.
3.2
Broken material crushedplastics
After the mechanical equipment is divided by physical means such as impact, cutting, tearing, etc., a certain size of waste plastic fragments or fragments are formed.
Broken film.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37547-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37547-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37547-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37547-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|