Search result: GB/T 36439-2018
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36439-2018 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
Non-destructive testing -- Certification and qualification of aerospace non-destructive testing personnel
| Valid |
GB/T 36439-2018
|
| Standard ID | GB/T 36439-2018 (GB/T36439-2018) | | Description (Translated English) | Non-destructive testing -- Certification and qualification of aerospace non-destructive testing personnel | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 19.100 | | Word Count Estimation | 26,212 | | Date of Issue | 2018-07-13 | | Date of Implementation | 2019-02-01 | | Issuing agency(ies) | State Administration of Markets and China National Standardization Administration |
GB/T 36439-2018
Non-destructive testing--Certification and qualification of aerospace non-destructive testing personnel
ICS 19.100
J04
National Standards of People's Republic of China
Nondestructive testing
Aviation non-destructive testing personnel qualification and certification
Published on.2018-07-13
Implementation of.2019-02-01
State Market Supervisory Administration
China National Standardization Administration issued
Content
Foreword III
1 range 1
2 Normative references 1
3 Terms and Definitions 2
4 General requirements 5
5 Qualification and Certification Level 7
6 Training and practical experience 9
7 Exam 13
8 Certification 15
Appendix A (Normative Appendix) Non-destructive testing level 3 personnel update certification points system 18
Reference 20
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Non-Destructive Testing Standardization Technical Committee (SAC/TC56).
This standard was drafted. China Aviation Integrated Technology Research Institute, Shanghai Materials Research Institute, Shanghai Aircraft Manufacturing Co., Ltd., General Electric
(China) Research and Development Center Co., Ltd., China Commercial Aircraft Co., Ltd. Shanghai Aircraft Design and Research Institute, Shanghai Aircraft Customer Service
Company, China Aviation Development Shanghai Commercial Aviation Engine Manufacturing Co., Ltd., Xiamen Taikoo Aircraft Engineering Co., Ltd., Chinese People's Liberation
Army 5720 Factory, Chengdu Aircraft Industry (Group) Co., Ltd., Beijing Power Machinery Research Institute, AVIC Commercial Aviation Engine
Limited Liability Company, Honeywell Integrated Technology (China) Co., Ltd., China Aerospace Beijing Aeronautical Materials Research Institute, AVIC Composite Materials
Company, AVIC Aircraft Co., Ltd., Luoyang LYC Bearing Co., Ltd., Beijing Junyou Integrity Quality Certification Co., Ltd.
The main drafters of this standard. Wang Juntao, Yan Min, Zhang Jingwei, Chu Fangmei, Shi Yiwei, Chen Cuili, Jin Yufei, Yang Yang, Li Ze, Zhou Jinqiu,
Xu Yanwei, Chen Wenbin, Feng Jianfei, Lei Yue, Lin Shanshan, Cao Qiang, Wu Shanpeng, Ding Jie, Li Huijuan, Liu Songping, Li Xiufen.
Nondestructive testing
Aviation non-destructive testing personnel qualification and certification
1 Scope
This standard specifies the minimum requirements for the qualification and certification of non-destructive testing personnel engaged in aeronautical manufacturing, service, maintenance and refurbishment. Also
The use of the non-destructive testing qualification committee is determined, but it is not mandatory to use the non-destructive testing qualification committee.
This standard applies to personnel who use non-destructive testing methods to perform testing and/or acceptance of materials, products, components, components and sub-assemblies.
Applicable to those directly responsible for the technical adequacy of all non-destructive testing methods, including approval of non-destructive testing procedures and process cards, review
A nuclear non-destructive testing agency or a person providing non-destructive testing technical support or training.
This standard does not apply to personnel who only supervise and manage non-destructive testing personnel or engage in research and development of non-destructive testing technology, even if
Technology needs to be approved by Level 3 personnel for subsequent implementation. Those who use a direct reading instrument for specific tests, through the method of level 3 people
After approval, it is not necessary to conduct qualification and certification according to the requirements of this standard.
The commonly used non-destructive testing methods included in this standard are as follows.
a) Penetration Detection LiquidPenetrant (PT)
b) Magnetic Particle Detection MagneticParticle (MT)
c) Thermal imaging detection Thermography (IRT)
d) Dislocation speckle detection Shearography (ST)
e) Eddy Current Test EddyCurrent (ET)
f) Ultrasonic testing Ultrasonic (UT)
g) Radiation detection (RT)
When the engineering or quality department, the recognized engineering organization or the main contractor makes a request, the parties may negotiate the “other” expected function of the component.
A non-destructive new method of non-destructive testing to assess and determine the suitability of materials, parts, components, subassemblies or components used. "Other methods
This includes, but is not limited to, acoustic emission detection, neutron photography detection, leak detection, and holographic detection. For those who are engaged in other methods, their training,
Practice requirements and exam requirements are in accordance with 6.4 and employers document such requirements.
Note. “Approval” means that the employer declares in writing that a person has met the requirements and is authorized to operate. When required, it is certified according to ISO /IEC 17024.
The term “certification” as defined in 3.1 is used interchangeably as “approval” throughout the standard. Certification in accordance with this standard, unless otherwise stated in writing
Includes operational authorization.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 9445 Non-destructive testing personnel qualification and certification
ISO 18490 Non-destructive testing non-destructive testing personnel visual acuity assessment (Non-destructive testing-Evaluationofvision
acuityofNDTpersonnel)
EN4179 Aerospace series non-destructive testing personnel qualification and approval (Aerospaceseries-Qualificationand
Approvalofpersonnelfornon-destructivetesting)
NAS410 Non-destructive testing personnel qualification and certification (Certification
Testingpersonnel)
......
|