|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36355-2018: Information technology -- Test method of solid-state disk
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36355-2018 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Information technology -- Test method of solid-state disk
| Valid |
GB/T 36355-2018
|
PDF similar to GB/T 36355-2018
Basic data | Standard ID | GB/T 36355-2018 (GB/T36355-2018) | | Description (Translated English) | Information technology -- Test method of solid-state disk | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L63 | | Classification of International Standard | 35.220 | | Word Count Estimation | 14,192 | | Date of Issue | 2018-06-07 | | Date of Implementation | 2019-01-01 | | Regulation (derived from) | National Standards Announcement No. 9 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36355-2018: Information technology -- Test method of solid-state disk---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology--Test method of solid state disk
ICS 35.220
L63
National Standards of People's Republic of China
Information Technology SSD Test Method
Published on.2018-06-07
2019-01-01 Implementation
National Market Supervision Administration
China National Standardization Administration released
Directory
Preface I
1 Scope 1
2 Terms and Definitions, Abbreviations 1
2.1 Terms and Definitions 1
2.2 Abbreviations 2
3 Test Environment 3
3.1 Physical Environment 3
3.2 Hardware Environment 3
3.3 Software Environment 3
4 Functional Test 3
4.1 Interface Protocol 3
4.2 Available Capacity 4
4.3 Power Failure Data Protection 5
4.4 Operating System Compatibility 5
5 Performance Test 6
5.1 read and write rate 6
5.2 Response time 7
5.3 Data transmission rate 8
5.4 Performance Stability 9
6 Data Conformance Test 10
6.1 Test Environment 10
6.2 Test Method 10
7 Data Saving Time Test 11
7.1 Test Environment 11
7.2 Test Method 11
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents.
This standard was proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).
This standard was drafted by. National Computer Quality Supervision and Inspection Center (Beijing Zunguan Technology Co., Ltd.), Huazhong University of Science and Technology, North
Beijing Institute of Computer Technology and Applications, China Electronics Standardization Institute, Huawei Technologies Co., Ltd., Inspur Electronic Information Industry Co., Ltd.
Co., Ltd., Dongguan City, Guangdong Province Quality Supervision and Inspection Center, Northwestern Polytechnical University, China Institute of Information and Communications, Shenzhen City
Company, Ali Cloud Computing Co., Ltd.
The main drafters of this standard. Yang Xiaoshan, Wu Fei, Wang Luda, Feng Dan, Chen Weiquan, Zhang Xiao, Zhou Jingcai, Zhao Jiang, Xie Changsheng, Zhang Zhanxin, Gao Jian,
Chen Hai, Fan Xing, Qiu Quanwei, Liu Gen, Guo Liang, Xia Qian, Chu Yibing, Wu Zhongjie.
Information Technology SSD Test Method
1 Scope
This standard specifies the test methods for SSD performance, performance, and data consistency and data retention.
This standard applies to the testing of SSDs with flash memory as the storage unit.
2 Terms and Definitions, Abbreviations
2.1 Terms and Definitions
The following terms and definitions apply to this document.
2.1.1
Solid state disk
A storage device that reads and writes data using an electronic memory or a memory module as a main recording medium.
Note. The SSD of the SSD is often abbreviated as the SolidStateDrive internationally. SolidStateDrive and the SSD referred to in this standard
To. Solid-state disks, also commonly referred to as electronic memory disks, are data storage devices that use flash memory as a storage unit, unlike traditional mechanical hard disks, and solid-state disks.
There is no mechanical part and it is mainly composed of a controller and a storage unit. The SSD referred to in this standard is different from the mobile flash disk (using USB as the main interface
The flash storage devices) usually use traditional mechanical hard disk interfaces such as SATA and SAS.
2.1.2
Nominal capacity nominalcapacity
The stated capacity stated on the relevant description of the tested SSD.
Note. Use PB, TB, GB , MB, KB or PiB, TiB, GiB, MiB, KiB, where.
a) 1KB = 1000 (103) bytes;
b) 1MB = 1000000 (106) bytes;
c) 1GB = 1000000000 (109) bytes;
d) 1TB = 1000000000000 (1012) bytes;
e) 1PB=1000000000000000 (1015) bytes;
f) 1KiB=1024 (210) bytes;
g) 1 MiB = 1048576 (220) bytes;
h) 1GiB=1073741824 (230) bytes;
i) 1TiB=1099511627776 (240) bytes;
j) 1PiB=1125899906842624 (250) bytes.
2.1.3
Available capacity usablecapacity
Actually accessible storage capacity. The unit conversion is calculated in binary.
Note. The common conversion methods for different occasions are.
a) Commonly used binary conversion in operating system, the conversion relationship is 1TiB=1024GiB, 1GiB=1024MiB, 1MiB=1024KiB;
b) SSD manufacturer commercial decimal conversion, the conversion relationship is 1TB = 1000GB , 1GB = 1000MB, 1MB = 1000KB. Thus, in
The display capacity seen in the firmware/BIOS, when formatting the hard disk, or in the file management system is smaller than the nominal capacity of the manufacturer.
2.1.4
Read and write rate
The number of reads and/or writes in unit time.
Note. Usually also called the number of input and output per second, that is, IOPS.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36355-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36355-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36355-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36355-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|