|
US$359.00 ยท In stock Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 36330-2018: Information technology -- Technical requirements of wireless sensor network system for gas meter remote management Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36330-2018 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Information technology -- Technical requirements of wireless sensor network system for gas meter remote management
| Valid |
GB/T 36330-2018
|
PDF similar to GB/T 36330-2018
Basic data | Standard ID | GB/T 36330-2018 (GB/T36330-2018) | | Description (Translated English) | Information technology -- Technical requirements of wireless sensor network system for gas meter remote management | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L79 | | Classification of International Standard | 35.110 | | Word Count Estimation | 18,199 | | Date of Issue | 2018-06-07 | | Date of Implementation | 2019-01-01 | | Regulation (derived from) | National Standards Announcement No. 9 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 36330-2018: Information technology -- Technical requirements of wireless sensor network system for gas meter remote management ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology--Technical requirements of wireless sensor network system for gas meter remote management
ICS 35.110
L79
National Standards of People's Republic of China
Information technology for remote management of gas meters
Wireless sensor network system technical requirements
Published on.2018-06-07
2019-01-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 network structure 2
4.1 Network Structure Figure 2
4.2 Description of each component in the network structure 3
5 General requirements 4
5.1 Data 4
5.2 Mark 4
5.3 Clock Synchronization 4
5.4 Reliability 4
5.5 Scalability 4
5.6 Security 4
5.7 Data Transmission Requirements 4
6 Remote Management Requirements 5
6.1 Gas meter 5
6.2 Relay 7
6.3 Gateway 7
6.4 Network Management Server 9
6.5 Business Management System 10
7 Communication Protocol Requirements 10
7.1 General 10
7.2 Communication Protocol Model 10
7.3 Physical Layer 10
7.4 Link Layer 10
7.5 Network Layer 10
7.6 Application Layer 10
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28).
This standard was drafted. Chengdu Qinchuan Internet of Things Technology Co., Ltd., China Electronics Technology Standardization Institute, Wuxi Internet of Things
Industry Research Institute, Liaoning Sikai Technology Co., Ltd., Xintian Technology Co., Ltd., Chongqing University of Posts and Telecommunications.
The main drafters of this standard. Shao Zehua, Su Jingru, Xiang Haijun, Quan Yaqiang, Zhang Lei, Zhuo Lan, Xing Tao, Lan Yuming, Fei Zhanbo, Luo Zhiyong,
Chen Shuyi, Wu Mingjuan.
Introduction
Wireless sensor network system for gas meter remote management combined with sensor network remote management features, through gas meter remote tube
The platform is used to realize long-distance centralized automatic meter reading and centralized management of many gas meters in the network, instead of the traditional manual decentralized copying
Table and management method, the number and location of nodes in the network are fixed, the node identity is clear, the function is determined, and all are controlled by legal system
Measuring instrument. The gas meter is installed in a gas-fired place where there is a risk of explosion. It is a node with energy limitation and adopts battery-powered mode.
Reduce the risk of explosion of gas meters. Gateways and relays are installed in locations where there is no potential for explosion, away from gas use locations, completely eliminating sensing
Explosion risk of intermediate nodes within the network.
This standard is used to standardize and guide the application of the domestic gas meter remote management system in the gas industry by establishing a unified gas meter.
Remote management system to solve various technical problems such as incompatibility of various gas meter manufacturers, communication technologies, transmission methods, network structures, etc.
The aim is to make the gas meter remote management communication network into an open, interconnected sensor network; to promote China's smart gas network,
Smart energy network and smart city construction; realize safe use of gas, fair use of gas, smart gas; lead sensor network technology in gas meter industry
Good development.
Information technology for remote management of gas meters
Wireless sensor network system technical requirements
1 Scope
This standard specifies the network structure, general requirements, and remote management functions of wireless sensor network systems for remote management of gas meters.
Summation communication protocol requirements.
This standard applies to the design, development and service of wireless sensor network systems for remote management of gas meters.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 30269.1-2015 Information technology sensor networks - Part 1. Reference architecture and general technical requirements
GB/T 30269.2-2013 Information technology sensor networks - Part 2. Terminology
GB/T 30269.302-2015 Information technology sensor networks - Part 302. Communication and information exchange. High reliability wireless
Sensor Network Media Access Control and Physical Layer Specifications
GB/T 30269.501-2014 Information technology sensor networks - Part 501. Identification.
GB/T 30269.901-2016 Information technology sensor networks - Part 901. Gateway. General technical requirements
CJ/T 449-2014 Cut-off membrane gas meter
3 Terms and definitions
The following terms and definitions as defined in GB/T 30269.2-2013 apply to this document.
3.1
Gas metering sensing unit gasmeteringsensingunit
According to a certain law, the speed, volume, mass, temperature, pressure, gas composition, etc. of the gas flowing through the closed pipeline for a period of time
A device that performs a test and converts the test result into a signal that can be further processed.
3.2
Gas intelligent control unit gassmartcontrolunit
Integrated in the gas meter controller, it can collect the measurement results of the gas metering sensor unit, with data storage and processing, automatic control valve,
Electronic controller for automatic billing, automatic price adjustment and other functions.
3.3
Meter-side wireless communication unit gasmeterterminalwirelesscommunicationunit
Integrated in the gas meter controller, it can communicate with the gas intelligent control unit through circuit connection, and can be farther through the gateway.
The report-side data on the process management platform can also be remotely managed by the remote management platform through the gateway.
3.4
Network management server networkmanagementserver
A management server that realizes the remote management of the gas meter to collect, analyze, process and issue instructions for each data of the wireless sensor network.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36330-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36330-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36330-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36330-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|