|
US$644.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36290.1-2020: Process diagrams for power plants - Part 1: Specification for diagrams
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36290.1-2020 | English | 644 |
Add to Cart
|
4 days [Need to translate]
|
Process diagrams for power plants - Part 1: Specification for diagrams
| Valid |
GB/T 36290.1-2020
|
PDF similar to GB/T 36290.1-2020
Basic data | Standard ID | GB/T 36290.1-2020 (GB/T36290.1-2020) | | Description (Translated English) | Process diagrams for power plants - Part 1: Specification for diagrams | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | F10 | | Classification of International Standard | 01.100.01 | | Word Count Estimation | 34,334 | | Date of Issue | 2020-06-02 | | Date of Implementation | 2020-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36290.1-2020: Process diagrams for power plants - Part 1: Specification for diagrams---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Power station flow chart - Part 1.Drawing specifications)
ICS 01.100.01
F10
National Standards of People's Republic of China
Power station flow chart Part 1.Drawing specifications
(ISO 14084-1.2015, IDT)
2020-06-02 release
2020-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Contents
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Basic aspects of power plant flow chart 2
4.1 General 2
4.2 Drawing types and their relationship 2
4.3 Life cycle aspects 3
4.4 Information content in drawings 3
5 Drawing type and content 4
5.1 General 4
5.2 Block Diagram (BLD) 4
5.2.1 Description 4
5.2.2 Application 4
5.2.3 Content 4
5.2.4 Representation 5
5.3 Process Flow Diagram (PFD) 5
5.3.1 Description 5
5.3.2 Application 5
5.3.3 Content 5
5.3.4 Representation 6
5.3.5 Flow chart of other types of process 6
5.4 Process and instrumentation diagram (PID) 6
5.4.1 Description 6
5.4.2 Application 6
5.4.3 Content 6
5.4.4 Representation 7
5.5 Process control diagram 7
5.5.1 Description 7
5.5.2 Application 7
5.5.3 Content 7
5.5.4 Representation 8
5.6 Typical Figure 8
5.6.1 Description 8
5.6.2 Application 8
5.6.3 Content 8
5.6.4 Representation 8
6 Represents the theme 9
6.1 General 9
6.2 Document paper 9
6.3 Technical information 9
6.4 Graphic symbols 9
6.4.1 General 9
6.4.2 Graphical symbols for power plant drawing 9
6.4.3 Extension of information 10
6.4.4 Combination of graphic symbols 10
6.4.5 Representation of large/complex objects in the figure 10
6.5 Connection 11
6.5.1 General 11
6.5.2 Flow direction indication 11
6.5.3 Diameter indication 11
6.5.4 Variable size of pipeline 11
6.5.5 Representation of connection 11
6.6 Measurement and control 12
6.7 Non-object symbols 12
6.8 Reference mark 12
6.8.1 General 12
6.8.2 Representation and position 12
6.8.3 Reference mark of the pipeline 13
Appendix A (informative appendix) Non-object type symbols, etc. 14
Appendix B (informative appendix) Example Figure 16
Appendix C (informative appendix) Power station reference mark 23
Appendix D (informative appendix) Refer to identification symbol 25
References 26
Foreword
GB/T 36290 "Flowchart of Power Station" is divided into two parts.
---Part 1.Drawing specifications;
---Part 2.Graphical symbols.
This part is Part 1 of GB/T 36290.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this section is equivalent to the use of ISO 14084-1.2015 "Plant Flow Chart Part 1.Drawing Specifications".
The Chinese documents that have a consistent correspondence with the normatively cited international documents in this section are as follows.
---GB/T 20063 (all parts) Graphic symbols for the sketch [ISO 14617 (all parts)].
The following editorial changes have been made in this section.
---Information cited documents in the text are included in the reference;
--- 4.2 added footnotes.
This standard was proposed by the China Electricity Council.
This part is under the jurisdiction of the National Power Station Process Monitoring and Information Standardization Technical Committee (SAC/TC376).
This section was drafted by. General Electric Power Planning Co., Ltd., State Power Investment Group Co., Ltd., China Datang Group Co., Ltd.,
Huadian Shaanxi Energy Co., Ltd., CNNC Wuhan Nuclear Power Operation Technology Co., Ltd., China Energy Construction Group Planning and Design Co., Ltd.,
China Electric Power Engineering Consulting Group Southwest Electric Power Design Institute Co., Ltd., China Electric Power Engineering Consulting Group Northwest Electric Power Design Institute Co., Ltd.,
University of Electronic Science and Technology, Southwest Jiaotong University, Chengdu Textile College, Yangcheng International Power Generation Co., Ltd., China Coal Huajin Group Jincheng
Thermal Power Co., Ltd., Ningxia Yinxing Power Generation Co., Ltd.
The main drafters of this section. Zhang Jinbin, Jiang Shihong, Cui Zhiqiang, Kang Chengjie, Thursday Wei, Zhao Min, Zhu Xinyue, Xu Kun Ling, Li Zhongbing, Yan Xinrong,
Huang Qi, Zhang Zili, Sun Jihong, Li Bo, Zheng Yunzhe, Lin Xiangdong, Zhang Tongfeng, Wang Ning, Li Guosheng, Shaan Chaolun, Liu Linhu, Li Tao.
Introduction
0.1 Overview
This part is related to the preparation work of the power station flow chart.
The drawing standards including graphic symbols in GB, ISO, and IEC together form the basis of the process industry drawing preparation work.
The relationship between these standards is shown in Figure 1.
Note. The standards marked with * are common application standards.
Figure 1 Correlation between ISO, IEC and GB drawing standards for power plants
0.2 Common application standards
The following standards.
---ISO 15519 series. process industry drawing specifications;
---ISO 14617 series. Graphical symbols for diagrams.
All belong to the general basic standards applicable to all application fields. Technical committees in various specialized application areas are allowed to add
Refine, and publish the corresponding standard as the common application standard of ISO 15519 series, ISO 14617 series or both.
0.3 Application area
This section applies to the field of power stations, including various types of conventional fossil fuel power stations, biomass fuel power stations, hydropower stations, sea wave energy power stations, wind power
Power stations, nuclear power stations, geothermal power stations, solar power stations, osmotic pressure power stations, waste incineration power stations and industrial power stations.
0.4 Figure
The diagrams in this section are only examples to illustrate the given rules.
0.5 Reference mark
In this section, ISO /T S16952-10 is used to explain the rules and guidelines for the use of reference signs in power plant flowcharts.
Appendix C gives a summary of ISO /T S16952-10.
Note. When using other reference identification systems, their application in the figure needs to be explained in the same way.
Power station flow chart Part 1.Drawing specifications
1 Scope
This part of GB/T 36290 specifies the types of power plant flow charts, and the rules for preparing and expressing information in the corresponding types of flow charts
And guide.
This part belongs to the common application standard of ISO 15519 series.
This section does not apply to electrical technical drawings covered by IEC 61082 and hydraulic drawings covered by ISO 1219-2.
2 Normative references
The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
Terms of ISO 10209 technical product documents and technical drawings, product definitions and related documents (Technical
productdocumentation-Vocabulary-Termsrelatingtotechnicaldrawings,productdefinitionand
relateddocumentation)
ISO 14617 (all parts) Graphic symbols for graphs (Graphicalsymbolsfordiagrams)
ISO 15519 (all parts) Specification for process industrial drawing (Specificationfordiagrams for process industry)
3 Terms and definitions
The terms and definitions defined by ISO 15519 (all parts) and ISO 10209 and the following apply to this document.
3.1
Blockdiagram;BLD
An overview drawing mainly using box symbols.
Note. Rewrite ISO 10209.2012, definition 11.16.
3.2
Process flow diagram processflowdiagram; PFD
A diagram that describes the composition of a process system or process plant through graphical symbols.
Note. Rewrite ISO 10209.2012, definition 11.126.
3.3
Process and instrumentation diagram processandinstrumentationdiagram; PID
Through the equipment, process flow path, process measurement and control function graphic symbols to represent the process system technology diagram.
Note. The process and instrument drawing types used in this section are technically the same as pipeline and instrument drawings. The reason why this part identifies the drawing name
The change is due to the use of this document type in the processing of fluids and solid materials in the field of power plants. Abbreviations for process and instrumentation diagrams in this section
Use PID to distinguish it from the traditional abbreviation P used in pipelines and instrumentation diagrams
3.4
Process control diagram processcontroldiagram; PCD
Diagram showing the configuration of measurement, control, and execution functions of a system or subsystem.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36290.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 36290.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36290.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36290.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|