GB/T 3622-2023_English: PDF (GB/T3622-2023)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 3622-2023 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Titanium and titanium alloy strip and foil
| Valid |
GB/T 3622-2023
|
GB/T 3622-2012 | English | 719 |
Add to Cart
|
4 days [Need to translate]
|
Titanium and titanium alloy strip and foil
| Obsolete |
GB/T 3622-2012
|
GB/T 3622-1999 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Titanium and titanium alloy strip and foil
| Obsolete |
GB/T 3622-1999
|
GB/T 3622-1983 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Titanium strip
| Obsolete |
GB/T 3622-1983
|
Standard ID | GB/T 3622-2023 (GB/T3622-2023) | Description (Translated English) | Titanium and titanium alloy strip and foil | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H64 | Classification of International Standard | 77.150.50 | Word Count Estimation | 12,142 | Date of Issue | 2023-05-23 | Date of Implementation | 2023-12-01 | Older Standard (superseded by this standard) | GB/T 3622-2012 | Drafting Organization | Baowu Special Metallurgy Co., Ltd., Institute of Metallurgical Industry Information Standards, Institute of Metal Research, Chinese Academy of Sciences, Shougang Group Co., Ltd., General Iron and Steel Research Institute Co., Ltd., Obotong Technology Industry Co., Ltd., Jiangsu Yonggang Group Co., Ltd., Jiangyin Xingcheng Special Steel Co., Ltd., Chengde Jianlong Special Steel Co., Ltd., Delong Iron and Steel Co., Ltd., Fushun Special Steel Co., Ltd., Luliang Jianlong Industrial Co., Ltd., Xining Special Steel Co., Ltd. | Administrative Organization | National Nonferrous Metals Standardization Technical Committee (SAC/TC 243) | Proposing organization | China Nonferrous Metals Industry Association | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee | Standard ID | GB/T 3622-2012 (GB/T3622-2012) | Description (Translated English) | Titanium and titanium alloy strip and foil | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H63 | Classification of International Standard | 77.150 | Word Count Estimation | 18,184 | Older Standard (superseded by this standard) | GB/T 3622-1999 | Quoted Standard | GB/T 228.1-2010; GB/T 232; GB/T 3620.1; GB/T 3620.2; GB/T 4698.1; GB/T 4698.2; GB/T 4698.3; GB/T 4698.4; GB/T 4698.5; GB/T 4698.6; GB/T 4698.7; GB/T 4698.8; GB/T 4698.9; GB/T 4698.10; GB/T 4698.11; GB/T 4698.12; GB/T 4698.13; GB/T 4698.14; GB/T 4698.15; G | Drafting Organization | Titanium Group Ltd. | Administrative Organization | National Standardization Technical Committee of non-ferrous metals | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the hot and cold rolling process to produce titanium and titanium alloy strip and foil cold rolling production requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates and cont | Standard ID | GB/T 3622-1999 (GB/T3622-1999) | Description (Translated English) | Titanium and titanium alloy strip and foil | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H64 | Classification of International Standard | 77.120.50 | Word Count Estimation | 8,832 | Date of Issue | 1999/7/23 | Date of Implementation | 2000/3/1 | Older Standard (superseded by this standard) | GB/T 3622-1983 | Adopted Standard | ASTM B265-1995, NEQ | Drafting Organization | Baoji Non-ferrous metals processing plant | Administrative Organization | China Non-ferrous metals Quality Standards and Metrology Institute | Regulation (derived from) | National Standards Bulletin 2012 No. 41 | Proposing organization | National Nonferrous Metals Industry Bureau | Issuing agency(ies) | State Quality and Technical Supervision | Summary | This Standard specifies titanium and titanium alloy strip, foil requirements, test methods, inspection rules and signs, packaging, transportation and storage. The standard wage for a variety of uses of titanium and titanium alloy strip, foil. |
GB/T 3622-2023: Titanium and titanium alloy strips and foils
ICS 77:150:50
CCSH64
National Standards of People's Republic of China
Replacing GB/T 3622-2012
Titanium and titanium alloy strip, foil
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 3622-2012 "Titanium and Titanium Alloy Strip and Foil": Compared with GB/T 3622-2012, except for structural adjustment and
Apart from editorial changes, the main technical changes are as follows:
a) Added "Terms and Definitions" (see Chapter 3);
b) The technical requirements of TA1 and TA2 products have been changed, and TA3 and TA4 have been deleted (see Table 5 and Table 6, Table 1 and Table 2 of the:2012 edition);
c) Added technical requirements for TA0, TA1G, TA2G, TA3G, TA4G products (see Table 1, Table 5, Table 6);
d) Changed the specification range of the product (see Table 1, Table 1 of the:2012 edition);
e) Changed the external dimensions and their allowable deviations (see 5:2, 3:5 of the:2012 edition);
f) Changed the bending performance requirements (see 5:4, 3:4 of the:2012 edition);
g) Changed the appearance quality requirements (see 5:4, 3:6 of the:2012 edition);
h) The analysis method of chemical composition has been changed (see 6:1, 4:1 of the:2012 edition);
i) The test method for tensile properties at room temperature has been changed (see 6:3, 4:2 of the:2012 edition);
j) Changed product marking requirements (see 8:1, 6:1 of the:2012 edition);
k) The packaging requirements have been changed (see 8:2, 6:2 of the:2012 edition):
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by China Nonferrous Metals Industry Association:
This document is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243):
This document is drafted by: Baotai Group Co:, Ltd:, Baoji Titanium Industry Co:, Ltd:, Nonferrous Metal Technology and Economic Research Institute Co:, Ltd:
Company, Hunan Xiangtou Jintian Titanium Co:, Ltd:, Xinjiang Xiangrun New Material Technology Co:, Ltd:, Chinalco Shenyang Nonferrous Metal Processing Co:, Ltd:
Company, Xi'an Johnson New Material Technology Co:, Ltd:
The main drafters of this document: Feng Junning, Liu Na, Li Xiaojun, Yang Juanli, Niu Rongrong, Gao Fei, Zhang Jiangfeng, Bai Zhihui, Ma Jiakun, Xie Chen,
Qi Hang, Wang Qinbo, Kong Bing, Tong Xiaole, Dai Shan, Guo Lei, Ma Zhongxian, Feng Yongqi, Gao Qi:
This document was first published in 1983, revised for the first time in:1999, revised for the second time in:2012, and this is the third revision:
Titanium and titanium alloy strip, foil
1 Scope
This document specifies the classification, marking, technical requirements, and testing of titanium and titanium alloy strips and foils (hereinafter referred to as "strips" and "foils")
Methods, inspection rules, signs, packaging, transportation, storage and accompanying documents and order form content:
This document applies to titanium and titanium alloy strip and foil produced by rolling:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 228:1-2021 Tensile test of metallic materials Part 1: Test method at room temperature
GB/T 232 Metal material bending test method
GB/T 3620:1 Grades and Chemical Compositions of Titanium and Titanium Alloys
GB/T 3620:2 Allowable Deviation of Chemical Composition of Titanium and Titanium Alloy Processed Products
GB/T 4698 (all parts) Methods for chemical analysis of titanium sponge, titanium and titanium alloys
GB/T 6611 Titanium and titanium alloy terms and metallographic diagrams
GB/T 8180 Packaging, marking, transportation and storage of titanium and titanium alloy processed products
GB/T 38982 Titanium and titanium alloy processed products external dimension detection method
YS/T 1262 Sponge titanium, titanium and titanium alloy chemical analysis methods for the determination of multi-element content inductively coupled plasma atomic emission
X-ray spectroscopy
3 Terms and Definitions
GB/T 6611, GB/T 38982 and the following terms and definitions apply to this document:
3:1
strip strip
The thickness is 0:10mm~5:00mm, the width is not more than 1500mm, and the product is supplied in roll form:
3:2
foil foil
Products with a thickness of less than 0:10mm and a width of no more than 300mm, supplied in rolls:
4 Classification and labeling
4:1 Product classification
The grade, state and specification of the product shall comply with the provisions in Table 1:
......
GB/T 3622-2012
ICS77.150
H63
National Standards of People's Republic of China
Replacing GB/T 3622-1999
Titanium and titanium alloy strip, foil
Issued on. 2013-10-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 3622-1999 "titanium and titanium alloy strip, foil."
This standard compared with GB/T 3622-1999, mainly in the following changes.
--- According to changes GB/T 3620.1-2007, the original grade TA0, TA1, TA2 respectively to TA1,
TA2, TA3;
--- Added TA4, TA8, TA8-1 and TA9-1 four grades and their requirements;
--- Adjusted TA1, TA2, TA3 grade mechanical properties;
--- Refined product size requirements, increasing the volume with the desired shape;
--- Refine the relevant provisions of surface quality;
--- Refine the product logo, packaging, transportation and storage requirements;
--- Increase the informative appendix A, given the volume of products supplied type packaging methods.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard was drafted. Baoji Titanium Group Ltd., Baoji Titanium Industry Co., Ltd.
The main drafters of this standard. Wang Qin wave, Fengjun Ning, Yangjuan Li, Wang, Ma Zhongxian, Wang Jian, Wang Hongwu, Lixian Jun.
This standard replaces the standards previously issued as follows.
--- GB/T 3622-1983, GB/T 3622-1999.
Titanium and titanium alloy strip, foil
1 Scope
This standard specifies requirements for hot and cold rolling process to produce titanium and titanium alloy strip and cold rolling process to produce foil, test methods, inspection
Inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or purchase order) content.
This standard applies to titanium and titanium alloy strip and foil for various purposes.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
RT Test Method. Test Part 1 GB/T 228.1-2010 metal material tensile
GB/T 232 metallic materials - Bend test
GB/T 3620.1 titanium and titanium alloys and chemical composition
GB/T 3620.2 titanium and titanium alloy products of chemical composition and permissible variations
GB/T 4698 (all parts) Sponge titanium, titanium and titanium alloys
GB/T 8180 titanium and titanium alloy products, packaging, labeling, transportation and storage
3 Requirements
3.1 Categories
3.1.1 grade, variety, processing methods, availability status, specifications and delivery methods to comply with Table 1.
Table 1
Grade varieties of processing methods Supply Status (thickness × width × length)/mm Supplied
TA1, TA2
TA3, TA4
TA8, TA8-1
TA9, TA9-1
TA10
Foil
Strip
Cold rolling
Cold rolling
Hot rolling
Cold state (Y)
Annealed (M)
Cold state (Y)
Annealed (M)
Thermal processing state (R)
Annealed (M)
(0.01 ~ < 0.03) × (30 ~ 100) × (≥500)
(0.03 ~ < 0.10) × (50 ~ 300) × (≥500)
(0.10 ~ < 0.30) × (50 ~ 300) × (≥500)
(0.30 < 3.00) × (< 500) × C
(3.00 ~ 4.75) × (< 600) × C
Products can chip or roll
Availability.
Trimming can be divided into supply roll
And not two kinds of trimming
NOTE. TA4 only strip, the minimum thickness of 0.30mm.
3.1.2 tag example
Products marked by product name, standard number, grade, state, thickness, width, length, sequence representation.
Example 1.
TA1, cold state, a thickness of 0.03mm, a width of 80mm, a length of foil is marked as C.
Foil GB/T 3622 TA1Y-0.03 × 80 × C
......
|