|
US$644.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36052-2018: Surface chemical analysis -- Data transfer format for scanning probe microscopy
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 36052-2018 | English | 644 |
Add to Cart
|
5 days [Need to translate]
|
Surface chemical analysis -- Data transfer format for scanning probe microscopy
| Valid |
GB/T 36052-2018
|
PDF similar to GB/T 36052-2018
Basic data | Standard ID | GB/T 36052-2018 (GB/T36052-2018) | | Description (Translated English) | Surface chemical analysis -- Data transfer format for scanning probe microscopy | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G04 | | Classification of International Standard | 71.040.40 | | Word Count Estimation | 34,369 | | Date of Issue | 2018-03-15 | | Date of Implementation | 2019-02-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 36052-2018: Surface chemical analysis -- Data transfer format for scanning probe microscopy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Surface chemical analysis--Data transfer format for scanning probe microscopy
ICS 71.040.40
G04
National Standards of People's Republic of China
Surface chemical analysis
Scanning Probe Microscope Data Transmission Format
(ISO 28600.2011, IDT)
Published by.2018-03-15
2019-02-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Format Description 1
Appendix A (Informative) Space Geometry and Scanner Type 10
Appendix B (Informative) Data Acquisition Geometry 13
Appendix C (Informative) Annotated Data Format Example 14
Appendix D (Informative) Data Format Example 27
References 29
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to using ISO 28600.2011 "surface chemical analysis scanning probe microscope data transmission format."
This standard was proposed and managed by the National Microbeam Standardization Technical Committee (SAC/TC38).
This standard was drafted by. Sun Yat-Sen University.
The main drafters of this standard. Chen Jian, Gong Li, Ding Xidong, Xie Fangyan, Hong Song, Zhang Weihong, Zhang Hao.
Introduction
In the field of surface topography and chemical analysis, many commercial scanning probe microscopes (SPMs) are used in various environments. These SPM
Instruments provide scientists and engineers with a wealth of analytical techniques and variable operating parameters. Due to the entire data acquisition and processing of SPM
The department can be digitally controlled by a computer with memory, so all data and parameters can be recorded in digitized files. but,
Because there is no standard SPM data format, data from different manufacturers' instruments is difficult to transmit, exchange, share, and archive. In addition,
The complexity of the data processing required to interpret the data makes it critical to maintain a complete record of data acquisition and preprocessing. So, to
Increased exchange, consistent interpretation and processing of data from different instruments, and reduction of uncertainty in data analysis require a number
According to the standard format of transmission.
Surface chemical analysis
Scanning Probe Microscope Data Transmission Format
1 Scope
This standard specifies the scanning probes to be displayed via cable, LAN, WAN, or other communication lines via a parallel or serial interface.
Micromirror (SPM) data is transferred from computer to computer format. The transmitted data appears on ordinary computer monitors or printers
Those characters are encoded.
The format is designed for SPM data such as scanning tunneling microscope (STM), atomic force microscopy (AFM) and use
Surface analysis of sharp probes on the surface of the article. This format covers single-channel imaging, multi-channel imaging, and single-point spectrum
The data available will be extended to two-dimensional spectral imaging in future releases.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 14976 Surface Chemical Analysis-Datatransferformat
3 Format Description
3.1 Overview
The basic idea of the SPM data transmission format is that the format is readable, writable, transferable, and adequate with common computer systems and communications equipment.
The flexibility to facilitate the future expansion of SPM-derived instruments is sufficiently versatile to accommodate a variety of measured physical quantities. To ensure the data office
Rationale and remote communication are easy to use. It is advantageous to use only characters that appear on ordinary monitors or printing devices because this is transmitted according to the communication protocol.
There are no difficulties with these characters and it is also possible to manually check the data. This is the principle followed when designing this format. This principle is similar to the current
Some international standards for surface chemical analysis ISO 14975 [1] and ISO 14976 (see Chapter 2) and international standards for microbeam analysis
ISO 22029 [2].
The main part of this standard includes the format description and relevant conventions. Appendix A describes the spatial geometry and type of scanner. Appendix B
A typical data acquisition geometry configuration is explained. Appendix C gives an example of a format with comments. Appendix D gives examples of data formats.
3.2 Elements of the Meta Language
The meta language consists of symbols that specify a series of rules to generate a sequence of linear characters. Only characters that match the rules can be inserted
To the sequence. The definition of the meta language should follow the ISO 14976 standard.
The symbols specified in the language are as follows.
* An integer followed by the number of occurrences of the event.
- Indicates that the foregoing terms are repeatable.
Separation of consecutive terms in a single definition.
| Separate the alternative single definitions in the definition list.
= Separates the definition list from the meta-identifiers defined by the format rules.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36052-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36052-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 36052-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36052-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|