|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35386-2017: Non-destructive testing -- Density resolution phantom for industrial computed tomography (CT) testing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35386-2017 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Non-destructive testing -- Density resolution phantom for industrial computed tomography (CT) testing
| Valid |
GB/T 35386-2017
|
PDF similar to GB/T 35386-2017
Basic data | Standard ID | GB/T 35386-2017 (GB/T35386-2017) | | Description (Translated English) | Non-destructive testing -- Density resolution phantom for industrial computed tomography (CT) testing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 19.100 | | Word Count Estimation | 14,191 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-04-01 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35386-2017: Non-destructive testing -- Density resolution phantom for industrial computed tomography (CT) testing
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing - Density resolution phantom for industrial computed tomography (CT) testing
ICS 19.100
J04
National Standards of People's Republic of China
Nondestructive testing Industrial Computer Tomography (CT)
Testing density resolution test card
Non-destructive testing-Density resolution for the industrial
computedtomography (CT) testing
2017-12-29 Posted
2018-04-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard by the National Standardization Technical Committee nondestructive testing (SAC/TC56) and focal point.
This standard drafting unit. Chongqing University, Chongqing true measurement Technology Co., Ltd., China Academy of Weapons Ningbo Branch, the Chinese people's liberation
Army 96630 troops, the car Qiqihar Vehicle Co., Ltd.
The main drafters of this standard. Cai Yufang, Wang Jue, Ni Peijun, Liu Rong, Liu Fenglin, Tan Hui, Shen Kuan, Zou Yongning, Ankang, Duan Liming,
Jia Qinglong, Zhao Caihong, Qiu enthalpy, Chen Yan, Wang Haibin.
Nondestructive testing Industrial Computer Tomography (CT)
Testing density resolution test card
1 Scope
This standard specifies the energy of more than 225keV industrial computer tomography (CT) testing density resolution test card classification, technology
Technical requirements and test methods.
This standard applies to the type of density resolution test card test and factory inspection. This standard can also be used as a basis for acceptance of user orders.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Terminology for nondestructive testing - Industrial computer tomography (CT) testing
Non-destructive testing - Industrial computer tomography (CT) image measuring method
GB/T 29069 nondestructive testing industrial computer tomography (CT) system performance testing methods
3 Terms and definitions
GB/T 12604.12 defined terms and definitions apply to this document.
4 classification, type and logo
4.1 Classification
4.1.1 This standard applies to the density resolution test card can be classified as follows.
4.1.2 According to the different structure can be divided into.
a) Air gap cards, divided into two types.
1) single air gap card;
2) Multi-air gap card.
b) solid density difference test pieces;
c) liquid density difference test pieces;
d) Disk Card.
4.1.3 According to different materials can be divided into.
a) steel density resolution test card, code-named FE;
b) aluminum density resolution test card, code-named AL;
c) titanium density resolution test card, code with TI said;
d) Other metal density resolution test card, code abbreviated name in English.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35386-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35386-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35386-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35386-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|