|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35382-2017: Test methods for energy consumption of blow moulding machines for plastics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35382-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for energy consumption of blow moulding machines for plastics
| Valid |
GB/T 35382-2017
|
PDF similar to GB/T 35382-2017
Basic data | Standard ID | GB/T 35382-2017 (GB/T35382-2017) | | Description (Translated English) | Test methods for energy consumption of blow moulding machines for plastics | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G95 | | Classification of International Standard | 71.120; 83.200 | | Word Count Estimation | 10,182 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35382-2017: Test methods for energy consumption of blow moulding machines for plastics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for energy consumption of blow molding machines for plastics
ICS 71.120; 83.200
G95
National Standards of People's Republic of China
Plastic hollow molding machine energy consumption testing methods
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by the China Petroleum and Chemical Industry Federation.
This standard by the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71) centralized.
This standard was drafted unit. Suzhou Tongda Machinery Co., Ltd., Jiangsu Vinda Machinery Co., Ltd., National Plastics Machinery Quality Supervision and Inspection
Inspection Center, Qinchuan Machine Tool Group Co., Ltd., Ningbo Gao Zhi Innovation and Technology Development Co., Ltd., Shandong Tong Jia Heavy Industry Co., Ltd., China Plastic
Materials Machinery Industry Association, Beijing Rubber Industry Research and Design Institute.
The main drafters of this standard.Xu Wenliang, Ji Weirong, Liu Jing, Ma Xiaogang, Tan Guanglin, Qin Quanrong, Dai Qiang, Li Chunyan, He Cheng, Wang Gengxin.
Plastic hollow molding machine energy consumption testing methods
1 Scope
This standard specifies the plastic hollow molding machine power consumption detection method.
This standard applies to the extrusion of thermoplastic plastic extrusion blow molding hollow molding machines and injection of thermoplastic plastic injection blow hollow
Forming Machine.
Note. The power measured in this standard does not include the machine and the mold cooling water, mold temperature and compressed air consumption of electricity.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3102.5 electrical and magnetic quantities and units
JB/T 5438 Plastics machinery terminology
3 Terms and definitions
GB/T 3102.5 and JB/T 5438 defined and the following terms and definitions apply to this document.
3.1
Machine power consumption machinetotalenergyconsumption
According to the method of Chapter 4 of the measured active power (see Figure 1) corresponds to the total power consumption.
Note. The unit is kWh (kW · h).
Figure 1 Power Triangle
3.2
Specific energy than specificmachinerelatedelectricenergyconsumption
Plastic hollow molding machine injection/extrusion unit mass per unit of energy consumption, in units of kilowatt-hours per kilogram (kW · h/kg).
3.3
Active power effective (active) power
Plastic hollow molding machine per unit time of the total power consumption, in units of kilowatts (kW).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35382-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35382-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35382-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35382-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|