|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35365-2017: Welding wires of titanium alloy for submersible application
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35365-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Welding wires of titanium alloy for submersible application
| Valid |
GB/T 35365-2017
|
PDF similar to GB/T 35365-2017
Basic data | Standard ID | GB/T 35365-2017 (GB/T35365-2017) | | Description (Translated English) | Welding wires of titanium alloy for submersible application | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H64 | | Classification of International Standard | 77.150 | | Word Count Estimation | 10,127 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 35365-2017: Welding wires of titanium alloy for submersible application---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Welding wires of titanium alloy for submersible application
ICS 77.150
H64
National Standards of People's Republic of China
Submersible titanium alloy wire
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard proposed by China Shipbuilding Industry Corporation.
This standard by the National Standardization Technical Committee submarine (SCA/TC306) centralized.
This standard was drafted by China Shipbuilding Industry Corporation 725 Institute, Western Superconducting Materials Technology Co., Ltd..
The main drafters of this standard.Xiong Jinhui, Zhang Jianxin, Liu Xilin, Yan Yangyang, Chen Haisheng.
Submersible titanium alloy wire
1 Scope
This standard specifies the submersible titanium and titanium alloy wire (hereinafter referred to as wire) classification, status, requirements, test methods, inspection rules
And packaging, marking and quality certificate.
This standard applies to inert gas welding, plasma welding and narrow gap welding methods such as welding wire.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4698 (all parts) - Methods for chemical analysis of sponge titanium, titanium and titanium alloys
GB/T 5168 alpha-beta titanium alloy high and low magnification test methods
GB/T 8180 Titanium and titanium alloy products packaging, marking, transportation and storage.
3 categories
Wire is divided into straight strips, roll and disk-shaped three types.
4 state
Product status is divided into soft and hard two states, generally soft, hard state should be marked instructions.
5 requirements
5.1 chemical composition
TA2, TA24, TA31 and TC4 corresponding wire were TA1, Ti75A, Ti80A and TC3, the chemical composition should be consistent with Table 1
Provisions.
Table 1 Chemical composition (mass fraction)
Grade
The main element
Impurity elements
no greater than
Ti Al Nb Zr Mo V Fe Si CNHO
TA1 substrate - - - - - 0.15 - 0.05 0.03 0.003 0.12
Ti75A matrix 1.0 to 3.0 - 1.0 to 3.0 1.0 to 2.0 - 0.15 0.04 0.10 0.04 0.010 0.10
Ti80A Matrix 4.0 ~ 6.0 2.5 ~ 3.5 1.5 ~ 2.5 0.6 ~ 1.5 ~ 0.15 0.04 0.10 0.04 0.010 0.10
TC3 matrix 4.5 ~ 6.0 - - - 3.5 ~ 4.5 0.25 - 0.05 0.05 0.012 0.15
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35365-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 35365-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35365-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35365-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|