HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 38973-2020 PDF English


Search result: GB/T 38973-2020 English: PDF (GB/T38973-2020)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 38973-2020English170 Add to Cart 0-9 seconds. Auto-delivery. Titanium and titanium alloy bars for additive manufactural powder Valid
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 38973-2020     Related standards: GB/T 38973-2020

PDF Preview: GB/T 38973-2020


GB/T 38973-2020: PDF in English (GBT 38973-2020)

GB/T 38973-2020 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.50;25.030 H 64 Titanium and titanium alloy bars for additive manufactural powder ISSUED ON: JULY 21, 2020 IMPLEMENTED ON: JUNE 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Technical requirements ... 4 4 Test methods ... 7 5 Inspection rules ... 8 6 Marking, packaging, transportation, storage and quality certificate ... 9 7 Order form (or contract) contents ... 10 Titanium and titanium alloy bars for additive manufactural powder 1 Scope This Standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, quality certificate and purchase order (or contract) of titanium and titanium alloy bars (hereinafter referred to as bars) for additive manufactural powder. This Standard applies to titanium and titanium alloy bars for manufactural powder of rotating electrode method and gas atomization method. 2 Normative references The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3620.2, Designation and composition of titanium and titanium alloys GB/T 4698, Methods for chemical analysis of titanium sponge, titanium and titanium alloys GB/T 5193, Method of ultrasonic inspection for wrought titanium and titanium alloy products GB/T 8180, Wrought titanium and titanium alloy products packing marking transporting and storing YS/T 1262, Method for chemical analysis of titanium sponge, titanium and titanium alloys - Determination of multielement content - Inductively coupled plasma atomic emission spectrometry 3 Technical requirements 3.1 Product classification The designation, status and specifications of the bars shall meet the requirements of Table 1. Other specifications, if any, shall be indicated in the order form (or contract). 3.3 Dimensions and allowable deviation 3.3.1 The allowable deviation of bar diameter is ±0.1 mm. 3.3.2 The allowable deviation of bar length is ±5 mm. A small number of bars whose length is shorter than the nominal length of 10 mm ~ 100 mm is allowed; the number shall not exceed 5% of the total number. 3.3.3 Both ends of the bar shall be cut flat; the cut slope shall not be greater than 4 mm. 3.3.4 The straightness of the bar shall not be greater than 2 mm/m. When the buyer has special requirements for straightness, it shall be indicated in the order form (or contract). 3.4 Ultrasonic inspection Bars shall be subjected to ultrasonic inspection, which shall meet the requirements of Grade A in GB/T 5193; there shall be no defects such as internal cracks and inclusions. 3.5 Surface condition The bars are supplied with a machined surface; the surface roughness Ra value shall not be greater than 3.2 μm. 3.6 Appearance quality 3.6.1 The surface of the bar shall be clean; no defects such as oxide scale, cracks, and folds are allowed. Local defects on the surface of the bar shall be removed; the cleaning depth shall not exceed the allowable deviation of the diameter. 3.6.2 The surface of the bar is allowed to have individual minor scratches, indentations, pitting and other defects that are not more than half of the allowable deviation of the diameter. 4 Test methods 4.1 The chemical composition analysis shall be carried out in accordance with GB/T 4698 or YS/T 1262; the arbitration analysis shall be carried out in accordance with GB/T 4698. 4.2 External dimensions and allowable deviation inspection shall be carried out with corresponding precision measuring tools. 4.3 The ultrasonic inspection shall be carried out in accordance with GB/T 5193. 5.4 Determination of the test result 5.4.1 When the chemical composition test result is unqualified, a repeated test is allowed for the unqualified element. If repeated inspections are still unqualified, judge the batch of products as unqualified. 5.4.2 When the external dimensions and allowable deviations, ultrasonic inspection, surface condition, and appearance quality inspection results are unqualified, judge a single piece as unqualified. 6 Marking, packaging, transportation, storage and quality certificate 6.1 Product marking The end face of each bar shall be marked with the following: a) designation; b) specifications; c) status; d) smelting furnace number or batch number. 6.2 Packaging, marking, transportation and storage The packaging, marking, transportation and storage of bars shall meet the requirements of GB/T 8180. 6.3 Quality certificate Each batch of bars shall be accompanied by a quality certificate, indicating: a) name of the supplier; ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.