|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 35092-2018: Methods of static load deflection measurement for hydraulic presses
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 35092-2018 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Methods of static load deflection measurement for hydraulic presses
| Valid |
GB/T 35092-2018
|
PDF similar to GB/T 35092-2018
Basic data | Standard ID | GB/T 35092-2018 (GB/T35092-2018) | | Description (Translated English) | Methods of static load deflection measurement for hydraulic presses | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J62 | | Classification of International Standard | 25.120.10 | | Word Count Estimation | 13,154 | | Date of Issue | 2018-05-14 | | Date of Implementation | 2018-12-01 | | Regulation (derived from) | National Standards Announcement No. 6 of 2018 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 35092-2018: Methods of static load deflection measurement for hydraulic presses---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Static load deformation measurement method for hydraulic press)
ICS 25.120.10
J62
National Standards of People's Republic of China
Hydraulic machine static load deformation measurement method
Published on.2018-05-14
2018-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Forging Machinery Standardization Technical Committee (SAC/TC220).
This standard was drafted. Hefei Heshun Intelligent Manufacturing Co., Ltd., Huzhou Machine Tool Works Co., Ltd., Foshan Kangsida Hydraulic Machinery
Co., Ltd., Tianjin Tianshou Press Co., Ltd., Fujian Province Xuan Xuan Technology Co., Ltd., Shenzhen Hua Test Co., Ltd., Nanan
City Machine Standardization Research Institute Co., Ltd.
The main drafters of this standard. Li Guixun, Zheng Jianhua, Zhang Yue, Wang Yushan, Yan Yan, Zhu Bin, Liu Panchao, Zheng Huating.
Hydraulic machine static load deformation measurement method
1 Scope
This standard specifies the static load deformation measurement method for hydraulic machines.
This standard applies to single-action four-column hydraulic presses, frame-structured hydraulic presses, double-acting hydraulic presses, horizontal hydraulic presses, and special-structure hydraulic presses.
Can be used for reference.
This standard does not apply to single-column hydraulic presses.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Slider deflection slidedeflection
When a uniform load corresponding to the nominal force is applied within a predetermined range on the bottom surface of the hydraulic machine slider, the bottom surface of the slider is at a predetermined position length (left)
The amount of deformation perpendicular to the direction of the working surface in the right or front-rear direction).
2.2
Work table deflection tabledeflection
When a uniform load equivalent to the nominal force is applied within the range specified on the work surface of the hydraulic machine, the work surface is at the specified position length (left)
The amount of deformation perpendicular to the direction of the working surface in the right or front-rear direction).
2.3
Relative deflection relativedeflection
The ratio of the deflection to the specified length in the specified length (left or right or front and rear direction).
3 Static load deformation measurement method
3.1 Slider, table deflection (left and right) and relative deflection (left and right)
3.1.1 Slider deflection (left and right) and relative deflection of the slider (left and right)
3.1.1.1 Measurement conditions
The following conditions should be met when measuring the deflection of the slider (left and right) and the relative deflection of the slider (left and right).
--- The loader is evenly placed within two-thirds of the length and width of the work surface. The specific layout principle of the loader is shown in Appendix A and
Appendix B;
---Indicating tables 1, 2, and 3 are placed on the left and right gantry as shown in Figure 1. The gantry is placed at the center position of the front and rear of the workbench.
And the lower plane of the slider.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 35092-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 35092-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 35092-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35092-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|