GB/T 35091-2018 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 35091-2018: Straight-sided high-speed mechanical power presses -- Types and basic parameters Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 35091-2018 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Straight-sided high-speed mechanical power presses -- Types and basic parameters
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 35091-2018
GB/T 35091-2018: Straight-sided high-speed mechanical power presses -- Types and basic parameters---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT35091-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.120.10
J 62
Straight-sided high-speed mechanical power presses -
Types and basic parameters
(ISO 9189.1993, Machine tools - Straight-sided high-speed mechanical power
presses from 250kN up to and including 4000kN nominal force -
Characteristics and dimensions, MOD)
Issued on: MAY 14, 2018
Implemented on: DECEMBER 01, 2018
Issued by. State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Terms and definitions ... 4
3 Types and basic parameters ... 5
Bibliography ... 7
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard uses redrafting method to modify and adopt ISO 9189.1993
“Machine tools - Straight-sided high-speed mechanical power presses from
250kN up to and including 4000kN nominal force - Characteristics and
dimensions”.
Compared with ISO 9189.1993, this Standard made structural adjustment to
Clause 3, setting subclauses of 3.1 and 3.2.
The technical differences and reasons between this Standard and ISO
9189.1993 are as follows.
- the scope of application was extended to 6300kN so as to adapt to the
development of closed high-speed press industry in China;
- added the "nominal force stroke" parameters so as to meet the needs of
China's stamping process;
- added the "number of strokes" parameter so as to meet the needs of
China's stamping process;
- added the parameter value of 6300kN specification in Table 1 so as to guide
the design and manufacture of closed high-speed press products in China;
- modified the parameter value of mold height adjustment amount hv so as
to adapt to the requirements of China's stamping process.
This Standard also made the following editorial modifications.
- modified the standard name.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Forging Machinery of Standardization Administration of China (SAC/TC 220).
The drafting organizations of this Standard. Jiangsu Xuzhou Forging Machine
Tool Group Co., Ltd., Shandong Laien Photoelectric Technology Co., Ltd.,
Zhejiang Yi Forging Precision Machinery Co., Ltd., Shenzhen Huace Testing
Co., Ltd., Fujian Haoxuan Technology Co., Ltd., Quanzhou Zhongzheng
Standardization Research Institute Co., Ltd.
Main drafters of this Standard. Min Jiancheng, Xu Yiwu, Wang Da, Zhang
Xinguo, Liu Panchao, Zhu Bin, Fang Xin, Lin Yuanzhen.
Straight-sided high-speed mechanical power presses -
Types and basic parameters
1 Scope
This Standard specifies the types and basic parameters of straight-sided high-
speed mechanical power presses of which the nominal force range is
250kN~6300kN.
This Standard is applicable to straight-sided high-speed mechanical power
presses of general use.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 high-speed press
a high-speed automatic press of which the slider has a multiple number of
strokes per minute than the universal press with the same nominal force; not
suitable for the press with single stroke, manual feeding operation, that requires
automatic feeding device to work together
2.2 nominal force, Fn
the maximum force allowed on the slider over a distance before the bottom
dead center
2.3 shut height normal slide stroke, en
the distance between the bottom of the slider and the plane on the pad of the
table when the height of the mold is adjusted to the upper limit and the slider is
at the bottom dead center
2.4 adjustable feed height, hf
the height measured from the plane of the table pad
NOTE. The following formula can be used to determine the fixed feed height.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 35091-2018 be delivered?Answer: The full copy PDF of English version of GB/T 35091-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 35091-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35091-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 35091-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 35091-2018?A step-by-step guide to download PDF of GB/T 35091-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 35091-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|