HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 34505-2017 English PDF

US$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34505-2017: Copper and copper alloy materials -- Tensile testing at room temperature
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 34505-2017English759 Add to Cart 6 days [Need to translate] Copper and copper alloy materials -- Tensile testing at room temperature Valid GB/T 34505-2017

PDF similar to GB/T 34505-2017


Standard similar to GB/T 34505-2017

GB/T 36915   GB/T 37306.1   GB/T 34487   GB/T 45597   GB/T 45169   

Basic data

Standard ID GB/T 34505-2017 (GB/T34505-2017)
Description (Translated English) Copper and copper alloy materials -- Tensile testing at room temperature
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H22
Classification of International Standard 77.040.10
Word Count Estimation 38,397
Date of Issue 2017-10-14
Date of Implementation 2018-05-01
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 34505-2017: Copper and copper alloy materials -- Tensile testing at room temperature

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Copper and copper alloy materials - Tensile testing at room temperature ICS 77.040.10 H22 National Standards of People's Republic of China Test methods for tensile testing of copper and copper alloy materials at room temperature 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 4 principle 3 5 Sample 3 5.1 Sample classification 3 5.2 sample type and size 4 5.3 Sample Selection 8 5.4 Sample billet section and direction of interception 11 5.5 Sample Preparation 12 5.6 Sample Identification 14 6 test methods 14 6.1 Test Equipment 14 6.2 test temperature 15 6.3 Determination of the original cross-sectional area of the sample S0 15 6.4 Marking of the original gauge length L0 of the specimen 17 6.5 test force zero setting 18 6.6 Sample holding 18 6.7 Test rate 18 6.8 Determination of mechanical properties 19 7 Test results 23 7.1 Test results revise the value of 23 7.2 Test results processing 23 8 Test Report 24 Measurement Uncertainty 24 Appendix A (Informative) Determination of elongation at break less than 5% 25 Appendix B (Informative) Shift method to determine the elongation after breakage 26 Appendix C (Normative) Progressive approximation method to determine the provisions of plastic extension strength (RP) 27 Appendix D (Informative) Tension test measurement uncertainty assessment 29

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed by China Nonferrous Metals Industry Association. This standard by the National Non-ferrous Metal Standardization Technical Committee (SAC/TC243) centralized. This standard drafting unit. Chinalco Luoyang Copper Co., Ltd., Guangdong Province Industrial Analysis Center, Shaoxing City, Quality and Technical Supervision Inspection Institute, Heze Kwong Yuen Copper Belt Co., Ltd., Ningbo Xingye Shengtai Group Co., Ltd., Zhejiang Metallurgical Product Quality Inspection Station Co., Ltd., Taiyuan Jinxi Chunlei Copper Co., Ltd., Anhui Chujiang Science and Technology Co., Ltd. New Materials, Shandong Tianyuan Copper Co., Ltd., Zhejiang Naile Copper Co., Ltd. Division, Beijing Nonferrous Metal Research Institute, National Copper and Aluminum Smelting and Processing Products Quality Supervision and Inspection Center, Suzhou Nonferrous Metal Research Institute Limited the company. The main drafters of this standard. Wang Yongxiang, Wang Qingyan, Lou East Court, Huang Xianzhi, Du Xiyong, Yu Liansheng, Ma Ji Miao, Li Feng, Zheng Xiaoying, Sun Honggang, Qi Zhaojin, Liu Jinlong, Zhang Hongju, Jia Zhijun, Gu Fengxian, Zheng Yun, Han Shumin, Wang Fusheng, Wang Shidong, Qian Weifeng. Test methods for tensile testing of copper and copper alloy materials at room temperature

1 Scope

This standard specifies the principles and scope of tensile testing methods for copper and copper alloy materials at room temperature, the definition of symbols and descriptions of terms, the sample and its ruler Inch measurement, test equipment, test requirements, performance measurement, measurement results revised value and test report. This standard applies to the determination of copper and copper alloy tensile properties at room temperature. This standard does not apply to special materials, such as composite, ultrafine, ultra-thin copper and copper alloy materials such as tensile properties at room temperature.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 8170 rounded repair rules and limit values of the representation and judgment GB/T 10623 metallic materials mechanical properties test terms GB/T 12160 single axis test extensometer calibration GB/T 16825.1 static uniaxial testing machine test Part 1. Tensile and (or) pressure testing machine testing system and force measurement calibration 3 Terms, definitions and symbols 3.1 Terms and definitions GB/T 10623 defined and the following terms and definitions apply to this document. 3.1.1 Fracture When the sample occurs when the phenomenon of complete separation. 3.1.2 Extension Increment of gauge gauge Le at any given moment during the test. 3.1.3 Elongation percentageextension The extension percentage, indicated by the extensometer gauge Le. 3.1.4 Strain rate ėLe Strain increase per unit time measured with extensometer gauge Le. 3.1.5 Provisions of plastic extension strength proofstrengthofplasticextension RP

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 34505-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 34505-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 34505-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 34505-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.