|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34486-2017: Titanium and titanium alloy powder for laser printer
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34486-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Titanium and titanium alloy powder for laser printer
| Valid |
GB/T 34486-2017
|
PDF similar to GB/T 34486-2017
Basic data | Standard ID | GB/T 34486-2017 (GB/T34486-2017) | | Description (Translated English) | Titanium and titanium alloy powder for laser printer | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H64 | | Classification of International Standard | 77.150.50 | | Word Count Estimation | 10,167 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-05-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34486-2017: Titanium and titanium alloy powder for laser printer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Titanium and titanium alloy powder for laser printer
ICS 77.150.50
H64
National Standards of People's Republic of China
Laser forming titanium and titanium alloy powder
2017-10-14 Published
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by China Nonferrous Metals Industry Association.
This standard by the National Non-ferrous Metal Standardization Technical Committee (SAC/TC243) centralized.
This standard was drafted unit. Baoti Group Co., Ltd., Baoji Titanium Co., Ltd., Non-ferrous Metal Technology Economic Research Institute, Beijing Airlines
Aerospace University, Baoji Haibao Special Metal Materials Co., Ltd., Aetna Technology Co., Ltd., Longyan Bauhinia Institute of Innovation, Xi'an
Sialon Metal Materials Co., Ltd., Beijing Metal Additive Manufacturing Innovation Center Co., Ltd.
The main drafters of this standard. Feng Juning, Ma Zhongxian, Hu Zhijie, Wu Yanhua, He Shulin, Chen Zhangan, Tian Xiangjun, Zhang Jianli, Wang Xuebing,
Liu Zhiguang, Zhu Jilei, Ang Lee.
Laser forming titanium and titanium alloy powder
1 Scope
This standard specifies the laser forming titanium and titanium alloy powder requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality
Certificate and contract (or purchase order) content.
This standard applies to laser forming titanium and titanium alloy powder.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1479.1 Determination of bulk density of metal powders - Part 1. Funnel method
GB/T 1480 metal powder dry screening method for the determination of particle size
GB/T 1482 Determination of metal powder flow standard funnel method (Hall flow meter)
GB/T 3620.2 Titanium and titanium alloy processing chemical composition allowable deviation
GB/T 4698 (all parts) - Methods for chemical analysis of sponge titanium, titanium and titanium alloys
GB/T 5162 Determination of metal powder tap density
GB/T 5314 powder metallurgy powder sampling method
3 requirements
3.1 grade, chemical composition
3.1.1 Product grades and chemical composition shall comply with the provisions of Table 1.
3.1.2 Demand side retest, the chemical composition of the product tolerance should be consistent with the provisions of GB/T 3620.2.
3.2 Granularity
Products are divided into four categories by particle size, particle size range should be consistent with the provisions of Table 2.
3.3 loose density
Loose product density should not be less than 2.4g/cm3.
3.4 tap density
The tap density of the product should not be less than 2.6g/cm3.
3.5 Liquidity
Product mobility should be between 20s/50g ~ 40s/50g.
3.6 appearance quality
3.6.1 The appearance of the product should be silver gray.
3.6.2 Product appearance should be spherical granule, no visible inclusions.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34486-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34486-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34486-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34486-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|