|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 34389-2017: Stamping dies -- Sliding plates
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 34389-2017 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Stamping dies -- Sliding plates
| Valid |
GB/T 34389-2017
|
PDF similar to GB/T 34389-2017
Basic data | Standard ID | GB/T 34389-2017 (GB/T34389-2017) | | Description (Translated English) | Stamping dies -- Sliding plates | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.10 | | Word Count Estimation | 10,123 | | Date of Issue | 2017-09-29 | | Date of Implementation | 2018-04-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 34389-2017: Stamping dies -- Sliding plates---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stamping dies - Sliding plates
ICS 25.120.10
J46
National Standards of People's Republic of China
Die guide slide
(ISO 23480.2013, Toolsforpressing-Slidingplates, MOD)
2017-09-29 Posted
2018-04-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses redrafted Law revision using ISO 23480.2013 "die guide skateboard."
This standard and ISO 23480.2013 technical differences and the reasons are as follows.
--- In the "range" added "This standard applies to die with skids" to meet the national standards;
--- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation
Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows.
● Replaced ISO 4762 with GB/T 70.1 modified to adopt international standards (see Table 1 and Table 2);
● Replace ISO 2768-1 (see 3.1, 3.2) with GB/T 1804-2000 equivalent to the international standard;
● Replace ISO 13715 with GB/T 19096 equivalent to the international standard (see 3.1, 3.2);
--- Modify Figure 1 cutting mode, increase the section line, and modify the screw, through hole and sink hole drawing, in line with the national standard mechanical drawing;
--- Increase l4 in Figure 2 label, corresponding to the corresponding l4 in Table 1;
--- In Figure 2, Figure 3 shows the diameter of the circle d, d1, d2 plus before Φ, in line with the national standard mechanical drawing;
--- Modify Figure 2, Figure 3, chamfering and surface roughness of the mark, and delete the description of the surface roughness unit, in line with the machine
Mechanical drawing national standards;
--- Modify the mark expression, in line with national standards.
This standard by the National Mold Standardization Technical Committee (SAC/TC33) and focal point.
The main drafting units of this standard. Dongguan City, Guangdong Province Quality Supervision and Testing Center, Jiangsu Province, precision molds product quality supervision and inspection center,
Youde Precision Industry (Kunshan) Co., Ltd., Sichuan Ruibao Electronics Co., Ltd., Chuzhou Jinke Machinery Mold Manufacturing Co., Ltd.
News Precision Industry (Chuzhou) Co., Ltd., Chuzhou Boké Molding Co., Ltd., Guilin Electric Institute of Science and Technology Co., Ltd.
The main drafters of this standard.Ou Hailong, Zhang Jun, Yang Jiahua, Zhao Yongbin, Gao Yong, Zhang Jie, Chen Min, Wang Chong, Huang Wei, Sun Wei, Liao Huijuan,
Hu Yongyou, Zhang Zhongge, Wang Shun, Wen Shijia.
Die guide slide
1 Scope
This standard specifies the die size with the main skid and tolerances (application examples shown in Figure 1).
This standard also specifies the skateboard markings.
This standard applies to die with skids.
Description.
1 --- A-type skateboard;
2 --- B-type skateboard.
Figure 1 skateboard application examples
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 70.1 Hexagon socket head cap screws (GB/T 70.1-2008, ISO 4762.2004, MOD)
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance (ISO 2768-1.1989, IDT)
GB/T 19096 technical drawings and drawings is not defined by the definition of the shape of the terms and Notes (GB/T 19096-2003,
ISO 13715.2000, IDT)
3 size
3.1 A-type single-sided skateboard
A-type single-sided skateboard size shown in Figure 2 and Table 1.
Undefined shape edge should be consistent with the provisions of GB/T 19096.
General tolerances should be consistent with GB/T 1804-2000 Chapter 5 m-level provisions.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34389-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 34389-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 34389-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34389-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|