HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 33924-2017 English PDF

US$114.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33924-2017: Mounting dimensions of rod-end spherical eyes for pneumatic cylinders
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 33924-2017English114 Add to Cart 3 days [Need to translate] Mounting dimensions of rod-end spherical eyes for pneumatic cylinders Valid GB/T 33924-2017

PDF similar to GB/T 33924-2017


Standard similar to GB/T 33924-2017

GB/T 42155   GB/T 40565.4   GB/T 40565.2   GB/T 22107   GB/T 33927   

Basic data

Standard ID GB/T 33924-2017 (GB/T33924-2017)
Description (Translated English) Mounting dimensions of rod-end spherical eyes for pneumatic cylinders
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J20
Classification of International Standard 23.100.20
Word Count Estimation 6,671
Date of Issue 2017-07-12
Date of Implementation 2018-02-01
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 33924-2017: Mounting dimensions of rod-end spherical eyes for pneumatic cylinders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mounting dimensions of rod-end spherical eyes for precision cylinders ICS 23.100.20 J20 National Standards of People's Republic of China Cylinder piston rod end spherical earring mounting dimensions (ISO 8139..2009, Pneumaticfluidpower-Cylinders, 1000 kPa (10 bar) series-Mountingdimensionsofrod-endsphericaleyes, IDT) 2017-07-12 released 2018-02-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to the international standard ISO 8139..2009 "pneumatic transmission 1000kPa (10bar) series cylinder rod end Spherical earring mounting dimensions ". And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. GB/T 8102-2008 Single rod cylinder with inner diameter of 8 mm to 25 mm (ISO 6432. 1985, IDT); Hydraulic cylinders - Mounting dimensions and type designation (ISO 6099..2001, IDT); GB/T 9094-2006. Fluid powertrain and component vocabulary (ISO 5598..2008, IDT); --- GB/T 32336-2015 Pneumatic belt Removable mounting Bore size 32mm to 320mm cylinder Basic dimensions, safety Size and accessory dimensions (ISO 15552..2004, IDT); --- JB/T 7377-2007 cylinder diameter 32 ~ 250mm integral installation single rod cylinder installation dimensions (ISO 6430..1992, IDT). This standard has made the following editorial changes. --- the standard name to "cylinder piston rod end of the ball earrings installation size"; - correct the error of the international standard, move the dimension line of EN in Figure 1 to the ear ball; --- Change the standard name of reference ISO 286-2 to the latest version. This standard is proposed by the China Machinery Industry Federation. This standard by the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3) centralized. This standard is responsible for drafting units. Yueqing Hengyi Pneumatic Co., Ltd. This standard participates in the drafting unit. Guangdong Zhaoqing Fangda Pneumatic Co., Ltd., National Pneumatic Product Quality Supervision and Inspection Center, Ningbo Jiaer Ling Pneumatic Machinery Co., Ltd., Beijing University of Aeronautics and Astronautics, Ningbo Yadeke Automation Industry Co., Ltd., Ningbo Isaia Aerospace complete sets of limited Company, Shanghai Kang Mao Sheng Automatic Control Co., Ltd., Zhejiang Braun Pneumatic Technology Co., Ltd. The main drafters of this standard. Zhu Lefei, Yu Jinze, Chen Dingzhi, Lin Weijiang, Lu Bo, Xu Wei, Shan Junbo, Shi Yan, Fang Qinghua, Chen Chenyang, LIN Kai-feng, ZHU Wei-jie, FANG Fu-nian, WANG Chao-yuan, JIANG Jian-sheng, HU Qiong-hao.

Introduction

In a pneumatic system, the power is transmitted and controlled by closing the compressed air in the circuit. A cylinder is an element in a pneumatic system that is a device that converts fluid energy into mechanical forces and travels linearly. Cylinder by cylinder Tube and the movement of the piston and piston rod and other components. Cylinder piston rod end spherical earring mounting dimensions

1 Scope

This standard specifies the mounting dimensions of the piston rod end of the cylinder piston rod to meet its interchangeability requirements. Piston rods with spherical earrings Designed for 1MPa series cylinders manufactured according to ISO 6430, ISO 6432 and ISO 15552, it can also be used in other respects. A spherical earring attached to the end of the cylinder piston rod for the mechanical connection of the cylinder during swing and tilt movement, ISO 6430, ISO 6432 and ISO 15552 specified in the cylinder diameter and pressure generated by the maximum force design.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 5598 fluid drive system and component vocabulary (Fluidpowersystemsandcomponents-Vocabulary) ISO 6099 Fluid Drive System and Component Cylinder Installation Dimensions and Mounting Type Code (Fluidpowersystemsandcom- ponents-Cylinders-Identificationcodeformountingdimensionsandmountingtypes) ISO 6430 air pressure single rod cylinder, 1000kPa (10bar) series, the overall installation, cylinder diameter 32mm to 250mm Installation dimensions [Pneumaticfluidpower-Singlerodcylinders, 1000kPa (10bar) series, withintegral mountings, boresfrom32mmto250mm-Mountingdimensions] ISO 6432 Pneumatic drive Single rod 1000kPa (10bar) Series Cylinder diameter 8mm to 25mm Mounting dimensions [Pneumaticfluidpower-Singlerodcylinders-1000kPa (10bar) series-Boresfrom8to25mm- Mountingdimensions] ISO 15552 air pressure belt with removable mounting parts, 1000kPa (10bar) series, cylinder diameter 32mm to 320mm Cylinder basic dimensions, mounting dimensions and accessory dimensions [Pneumaticfluidpower-Cylinderswithdetachablemountings, 1000kPa (10bar) series, boresfrom32mmto320mm-Basic, mountingandaccessoriesdimen- sions

3 terms and definitions

The terms and definitions defined in ISO 5598 apply to this document.

4 installation dimensions

The mounting dimensions of the rod-shaped spherical earrings are shown in Figures 1 and 1. The mounting dimensions and mounting type are in accordance with ISO 6099.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 33924-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 33924-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 33924-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 33924-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.