|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33885-2017: Non-destructive testing instruments -- General requirements for sampling, routine inspection and type inspection
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33885-2017 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Non-destructive testing instruments -- General requirements for sampling, routine inspection and type inspection
| Valid |
GB/T 33885-2017
|
PDF similar to GB/T 33885-2017
Basic data | Standard ID | GB/T 33885-2017 (GB/T33885-2017) | | Description (Translated English) | Non-destructive testing instruments -- General requirements for sampling, routine inspection and type inspection | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N78 | | Classification of International Standard | 19.100 | | Word Count Estimation | 18,130 | | Date of Issue | 2017-07-12 | | Date of Implementation | 2018-02-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33885-2017: Non-destructive testing instruments -- General requirements for sampling, routine inspection and type inspection
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing instruments - General requirements for sampling, routine inspection and type inspection
ICS 19.100
N78
National Standards of People's Republic of China
Nondestructive testing equipment
Sampling, factory inspection, type inspection basic requirements
Generalrequirementsforsampling, routineinspectionandtypeinspection
2017-07-12 released
2018-02-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Directory
Preface III
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 Sampling 1
4.1 sampling test conditions 1
4.2 Procedure for sampling inspection 1
4.3 Implementation of sampling inspection 2
5 factory inspection 2
5.1 basic requirements of factory inspection 2
5.2 Factory inspection sampling and group approval rules 3
6 type test 4
6.1 Basic Requirements for Type Inspection 4
6.2 Type Inspection Sampling and Group Batch Rules 5
6.3 Test of samples 5
6.4 Sampling plan 5
6.5 Qualified Method 6
6.6 Disposal after type inspection 6
Appendix A (informative) Sample Size Code 8
Appendix B (informative appendix) Primary and secondary sampling plan 9
Appendix C (informative) A sampling plan for the determination of level II
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Machinery Industry Federation.
This standard by the National Testing Machine Standardization Technical Committee (SAC/TC122) centralized.
The drafting of this standard. Edson (Xiamen) Electronics Co., Ltd., Liaoning Institute of Instrumentation, Institute of Acoustics, Chinese Academy of Sciences, steel research
General Hospital, Wuhan Branch of the innovative technology joint - stock company.
The main drafters of this standard. Lin Junming, Yu Zhijun, Shen Jianzhong, Fan Hong, Wang Zicheng, Zhao Jincheng.
Nondestructive testing equipment
Sampling, factory inspection, type inspection basic requirements
1 Scope
This standard specifies the basic requirements for non-destructive testing equipment sampling, factory inspection and type inspection.
This standard applies to non-destructive testing equipment and complete sets of equipment and functional equipment accessories (hereinafter referred to as the instrument) and so on.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2828.1 Sampling inspection procedures Part 1. Batch inspection sampling plan for retrieval by quality limit (AQL)
GB/T 2829 Periodic inspection count Sampling procedures and tables (for inspection of process stability)
GB 4793.1 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements
GB/T 6587 General specification for electronic measuring instruments
GB/T 17626 (all parts) Electromagnetic compatibility test and measurement technology
GB/T 19000 Quality Management System Basis and Terminology
JB/T 6214 instrumentation reliability verification test and determination test (index distribution) guide
3 terms and definitions
GB/T 2828.1, GB/T 2829, GB/T 19000 The terms and definitions defined apply to this document.
4 sample
4.1 sampling test conditions
Sampling tests shall be carried out under the following conditions.
a) Environmental conditions. according to the relevant provisions. If there is no provision, without any objection, can be carried out under the natural conditions of the room;
b) inspection, test equipment. inspection, test equipment should be able to meet the needs of inspection. The accuracy of all measuring equipment should be met
Inspection requirements, and within the validity period of the measurement test certificate or calibration certificate;
c) When using computer software as a means of inspection, should be used before the test;
d) The test substance shall conform to the relevant provisions.
4.2 Procedures for sampling inspection
The inspection procedures stipulated in this standard are as follows.
a) specify the quality characteristics of the unit product;
b) the classification of nonconformities;
c) provide qualified quality;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33885-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 33885-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33885-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33885-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|