|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3303-2018: Terminology of defects for domestic ceramics
Status: Valid GB/T 3303: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3303-2018 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Terminology of defects for domestic ceramics
| Valid |
GB/T 3303-2018
|
| GB/T 3303-1982 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Terms used for defects for domestic ceramic ware
| Obsolete |
GB/T 3303-1982
|
PDF similar to GB/T 3303-2018
Basic data | Standard ID | GB/T 3303-2018 (GB/T3303-2018) | | Description (Translated English) | Terminology of defects for domestic ceramics | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y20 | | Classification of International Standard | 81.060.01 | | Word Count Estimation | 14,120 | | Date of Issue | 2018-03-15 | | Date of Implementation | 2018-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 3303-2018: Terminology of defects for domestic ceramics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terminology of defects for domestic ceramics
ICS 81.060.01
Y20
National Standards of People's Republic of China
Replacing GB/T 3303-1982
Daily Ceramics Defect Terms
Published by.2018-03-15
2018-10-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3303-1982 "Defective Terminology of Daily Ceramics".
Compared with GB/T 3303-1982, the main technical changes are as follows.
--- Modify the scope of the standard (see Chapter 1);
--- Modified 7 generic terms (see Chapter 2, Chapter 1 of the 1982 edition);
--- Revised five noun terminologies for product defects (see Chapter 3, Chapter 2 of the 1982 edition);
--- Increased 9 terms of product defect nouns (see Chapter 3);
--- According to relevant British and American standards, some English terms have been revised.
This standard is proposed and managed by the China Light Industry Federation.
This standard was drafted by. China Light Industrial Ceramic Research Institute, Shenzhen Guoyuan Yongfengyuan Porcelain Industry Co., Ltd., Fujian Guanfu Industrial Co., Ltd.
Division, Guangdong Ming Ming Ceramics Technology Co., Ltd.
The main drafters of this standard are. Zhang Jian, Xiao Jianxiang, Meng Ruifei, Dai Yapeng, Zhang Jianping, Li Xiujia, Zheng Qiurong.
The previous versions of the standard replaced by this standard are.
--- GB/T 3303-1982.
Daily Ceramics Defect Terms
1 Scope
This standard defines the terms and definitions of defective ceramics for daily use.
This standard applies to daily-use ceramic products.
2 General terms
2.1
Flatware flatware
Ceramic products with a depth of less than or equal to 25 mm from the mouth of the product to the lowest level in the interior.
2.2
Hollowware hollowware
Ceramic products with a depth greater than 25 mm from the mouth of the product to the lowest level in the interior.
2.3
Large hollow products biglowlowware
A hollow product with a capacity greater than or equal to 1100 mL.
2.4
Small hollow products smalholowware
Hollow products with a capacity of less than 1100 mL.
2.5
Visible surface opensurface
Inside and outside surfaces of bowls, cups, jars, pots, altars, bottles, cans, pots, lids, bowl lids, surface of dishes, and sculptures
Front, middle and small front and back.
2.6
Non-significant surface hiddensurface
Places that are not easily visible when placed by custom.
2.7
Not allowed notalowed
No indications are allowed on the product.
2.8
Very not very veryobscure
The visually invisible defects were observed visually at a distance of 500 mm from a light intensity of 300 lx to 500 lx.
2.9
Unobvious obscure
In the illumination of 300lx~500lx, the distance from the front of 500mm is visually inspected for less visible defects.
2.10
Not so obvious nottooobvious
In the 300lx ~ 500lx illumination under the light of 500mm from the front of the visual observation easier to see, but less obvious defects.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3303-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 3303-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 3303-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3303-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 3303-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3303-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|