| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31934-2015 | English | 140 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Measuring and calculation method for heat storage capacity of high radiative coating
| Valid |
GB/T 31934-2015
|
PDF similar to GB/T 31934-2015
Basic data | Standard ID | GB/T 31934-2015 (GB/T31934-2015) | | Description (Translated English) | Measuring and calculation method for heat storage capacity of high radiative coating | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H04 | | Classification of International Standard | 77.010 | | Word Count Estimation | 8,84 | | Date of Issue | 2015-09-11 | | Date of Implementation | 2016-06-01 | | Quoted Standard | GB/T 7321; GB/T 8170 | | Regulation (derived from) | National Standard Announcement 2015 No.25 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the terms and definitions and calculation methods measured high radiation coating of heat storage, test methods, materials, equipment, sample preparation, measurement and calculation of heat storage, allowing the poor and the measurement report. This Standard applies to all kinds of high radiation firing refractory matrix coating regenerator. | GB/T 31934-2015: Measuring and calculation method for heat storage capacity of high radiative coating
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Determination and calculation of high radiation coating of heat storage)
ICS 77.010
H04
National Standards of People's Republic of China
Determination and calculation of high radiation coating of heat storage
Issued on. 2015-09-11
2016-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Iron and Steel Association.
This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized.
This standard was drafted. Shandong Huimin Technology Development Co., Ltd., Metallurgical Industry Information Standards Institute, Shougang, Angang has
Limited.
The main drafters of this standard. Zhou Huimin, Zhangshao Jiang, Wang Jiang, Chenguan Jun, Chou Jinhui, Xu Dayong Liu Yi Zhou, Liang, Liu Changfu, Wang Lianjie,
Liu Changpeng.
Determination and calculation of high radiation coating of heat storage
1 Scope
This standard specifies the terms and definitions of determination and calculation method of high radiation coating of heat storage, test methods, materials, equipment, sample
Preparation, determination and calculation of heat storage, allowing the poor and the measurement report.
This standard applies to all kinds of high radiation firing refractory matrix coating regenerator.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 7321 sample preparation method shaped refractory products
GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
High radiation coating highradiativecoating
Regenerator in high emissivity surface layer of the coating material to the substrate emissivity.
3.2
High radiation coating regenerator regeneratorwithhighradiativecoating
Coated high radiation coating can improve the regenerator heat exchange rates.
3.3
Heat storage heatstoragecapacity
At a predetermined time and temperature conditions set by the regenerator heat absorbed in joules (J).
3.4
Pretreatment liquid pretreatmentsolution
Corresponding to the high radiation coating material in the high temperature binder and water in certain proportion of the solution.
Test Method 4
The same batch of coated high radiation coating and high radiation coating uncoated two of the same material, the same shape, the same size regenerator sample
Heating under the same conditions, reuse calorimeter measurement and calculation of heat accumulation two samples.
5 material
Regenerator, high radiation coating material and the pretreatment liquid.
|