|
US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31052.10-2016: Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31052.10-2016 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment
| Valid |
GB/T 31052.10-2016
|
PDF similar to GB/T 31052.10-2016
Basic data | Standard ID | GB/T 31052.10-2016 (GB/T31052.10-2016) | | Description (Translated English) | Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.99 | | Word Count Estimation | 23,224 | | Date of Issue | 2016-02-24 | | Date of Implementation | 2016-09-01 | | Regulation (derived from) | National Standard Announcement No | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 31052.10-2016: Lifting appliances -- Code of inspection and maintenance -- Part 10: Series lifting equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lifting appliances - Code of inspection and maintenance - Part 10. Series lifting equipment
ICS 53.020.99
J80
National Standards of People's Republic of China
Crane inspection and maintenance procedures
Part 10. small light lifting equipment
Issued on. 2016-02-24
2016-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
CONTENTS
Introduction Ⅲ ...
1 Scope 1 ...
2 Normative references 1 ...
3 Terms and definitions ...
4 General requirements 1 ...
5 Check 1 ...
6 Maintenance 2 ...
7 Inspection and maintenance of the safety precautions 2 ...
Appendix A (normative) daily and periodic inspection programs, methods, content and requirements ... 3
Appendix B (normative) special inspection items, methods, content and requirements ... 13
Annex C (informative) Inspection Report 15 ...
Annex D (informative) Maintenance Record 16 ...
References 17 ...
Foreword
GB/T 31052 "crane inspection and maintenance procedures" is divided into 12 sections.
--- Part 1. General;
--- Part 2. Mobile cranes;
--- Part 3. Tower cranes;
--- Part 4. jib cranes;
--- Part 5. Bridge and gantry crane;
--- Part 6. cable cranes;
--- Part 7. Mast Crane;
--- Part 8. Railway Crane;
--- Part 9. Lifts;
--- Part 10. small light lifting equipment;
--- Part 11. Mechanical parking equipment;
--- Part 12. floating crane.
This section GB/T Part of 1,031,052.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is responsible for drafting unit. Beijing Materials Handling Design and Research Institute, the National lifting the transport machinery for Quality Supervision and Inspection Center.
This section participated in the drafting unit. China Electric Power Research Institute, Konecranes (Shanghai) Co., Demag Cranes & Components (Shanghai) Co., Ltd., Nanjing Hoisting Machinery Plant Co., Weihua Group Co., Ltd., Jiangyin Kai Shing crane Co., Ltd., Zhejiang double Bird Machinery Co., Ltd., Jiangxi hoisting Machinery Plant, Tianjin lifting equipment Co.,
Beijing dual Thai Pneumatic Equipment Co., Ltd. Nanjing next Mechanical Engineering, Henan Power Partners Ltd..
The main drafters of this section. Chenrui Ming, Zhao Chunhui, Wang Shunting, Miao Qian shall be mine, Xie Wei, Wang Lee, Sun Mingyao, Hu Gang, Zhang Ji Jun, Liu Xiaosheng, Yan Xu Qiang, Zhou Wenchuan, money-Myers Squibb, Hou Dong-hong.
Crane inspection and maintenance procedures
Part 10. small light lifting equipment
1 Scope
GB/T 31052 provisions of this part of the basic requirements of the inspection and maintenance of the small light lifting equipment in use should be carried out.
This section applies to GB/T 31052.1-2014 specified in Appendix A small light lifting equipment (hereinafter referred to as "equipment").
2 Normative references
The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5972 crane wire rope maintenance, maintenance, installation, examination and discard
GB 6067.1-2010 crane safety regulations - Part 1. General
GB/T 10051.2 lifting hook - Part 2. Forged hook technical conditions
GB/T 10051.3 lifting hooks - Part 3. Forged hook in check
GB/T 31052.1-2014 crane inspection and maintenance procedures - Part 1. General
3 Terms and Definitions
Terms and definitions GB/T 31052.1 defined apply to this document.
4 General requirements
Inspection and maintenance of general requirements should be consistent with the provisions of GB/T 31052.1-2014 in Chapter 4.
5 Check
5.1 Daily Inspection
Shall determine the daily inspection items and inspection requirements according to the specific characteristics of each device, and should not be less than the specified in Appendix A of.
5.2 Periodic inspection
Depending on the characteristics of the equipment to determine the periodic inspection period is monthly inspection, quarterly inspection and annual inspection.
According to the working level of each piece of equipment, the working environment and the use of periodic checks to determine the status of the project, inspection requirements and inspection cycle, and should not be less than the specified in Appendix A of. Lifting equipment for the molten metal and other dangerous goods, should be appropriate to shorten the examination period.
5.3 Special inspection
5.3.1 In the event of GB/T cases specified in 5.3.1 31052.1-2014 special inspection should be carried out.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31052.10-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 31052.10-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31052.10-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31052.10-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|