|
US$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31052.1-2014: Lifting appliances -- Code of inspection and maintenance -- Part 1: General
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31052.1-2014 | English | 299 |
Add to Cart
|
3 days [Need to translate]
|
Lifting appliances -- Code of inspection and maintenance -- Part 1: General
| Valid |
GB/T 31052.1-2014
|
PDF similar to GB/T 31052.1-2014
Basic data | Standard ID | GB/T 31052.1-2014 (GB/T31052.1-2014) | | Description (Translated English) | Lifting appliances -- Code of inspection and maintenance -- Part 1: General | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 13,112 | | Date of Issue | 12/12/2014 | | Date of Implementation | 6/1/2015 | | Quoted Standard | GB/T 5905; GB/T 28758 | | Regulation (derived from) | National Standards Bulletin 2014 No. 30 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the basic requirements for the inspection and maintenance of the crane during use should be carried out. This standard applies to mobile cranes, tower cranes, jib cranes, bridge and gantry cranes, cable cranes, derricks, railway cr | GB/T 31052.1-2014: Lifting appliances -- Code of inspection and maintenance -- Part 1: General---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lifting appliances - Code of inspection and maintenance - Part 1. General
ICS 53.020.20
J80
National Standards of People's Republic of China
Crane inspection and maintenance procedures
Part 1. General
Part 1. General
Issued on. 2014-12-22
2015-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 31052 "crane inspection and maintenance procedures" is divided into 12 sections.
--- Part 1. General;
--- Part 2. Mobile cranes;
--- Part 3. Tower cranes;
--- Part 4. jib cranes;
--- Part 5. Bridge and gantry crane;
--- Part 6. cable cranes;
--- Part 7. Mast Crane;
--- Part 8. Railway Crane;
--- Part 9. Lifts;
--- Part 10. small light lifting equipment;
--- Part 11. Mechanical parking equipment;
--- Part 12. floating crane.
This section GB/T Part of 131,052.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee crane (SAC/TC227) centralized.
This section is responsible for drafting unit. Beijing Materials Handling Design and Research Institute.
This section participated in the drafting unit. China Academy of Building Research Construction Mechanization Research Branch, Shanghai Zhenhua Heavy Industry (Group) Company Limited
Division Shanghai Diprospan Heavy Machinery Engineering (Group) Co., Ltd., Wuhan Bridge Heavy Industries Group Co., Konecranes (Shanghai) Co.,
The company, Hangzhou State Power Engineering Co., Ltd. vigorously, China Heavy Machinery Industry Association Working Committee parking equipment, special equipment Shanghai
Inspection Technology Research Institute, Zhejiang Lei Meng Machinery Co., Ltd., Qiqihar Railway Equipment Co., Ltd., Hangzhou State motor
Mechanical Design and Research Institute Co., Ltd., Beijing is engineering equipment and services Co., Ltd., Sinopec Tenth Construction Company Limited.
The main drafters of this section. Zhao Chunhui, Shang Hong, Luo Wenlong, Chen Fuquan, Chen Ruiming, Hou Jiang, YANG An, \u200b\u200bQiuhao Liang, Hu Zhuohui, Zhang,
Shu dual Yuan, Ming Yan-hua, Yu built, Zhou Jie, Zhao Xiude, Jiang Shuwen, SP Chan, Ma Yin, Zhou Xu, Guo Zhikang.
Crane inspection and maintenance procedures
Part 1. General
1 Scope
GB/T 31052 provisions of this part of the basic requirements of the inspection and maintenance of the crane during use should be carried out.
This section applies to mobile cranes, tower cranes, jib cranes, bridge and gantry cranes, cable cranes, lifting masts
Machine, rail cranes, lifts, small light lifting equipment, mechanical parking equipment and floating cranes, see Appendix A.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5905 Cranes - Test code and procedures
Qualification GB/T 28758 requirements for crane inspectors
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Check inspection
To determine whether a series of work Lifting normal state carried out, check into routine inspection, periodic inspection and special inspection.
3.2
Routine inspection dailyinspection
Before the start of each work shift job inspection.
3.3
Regular inspection periodicinspection
The use of the crane, in accordance with the provisions of the inspection cycle.
3.4
Special examination exceptionalinspection
When the crane itself or external conditions change, and the former is enabled again after the closure of the check carried out.
3.5
Maintenance maintenance
A series of work to make the crane to be able to maintain or restore the status of the implementation of its specified functions carried out, maintenance is divided into planned maintenance
And unplanned maintenance. Maintenance work includes maintenance and repair.
3.6
Maintenance preventingmaintenance
To ensure the normal and safe operation of the crane, and the necessary work carried out as planned, including. cleaning, lubricating, tightening, adjusting, anti
Rot.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31052.1-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31052.1-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31052.1-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31052.1-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|