HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 30867-2014 English PDF

US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30867-2014: Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 30867-2014English169 Add to Cart 3 days [Need to translate] Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers Valid GB/T 30867-2014

PDF similar to GB/T 30867-2014


Standard similar to GB/T 30867-2014

GB/T 29055   GB/T 31854   SJ/T 11488   GB/T 30866   GB/T 30868   GB/T 30858   

Basic data

Standard ID GB/T 30867-2014 (GB/T30867-2014)
Description (Translated English) Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H83
Classification of International Standard 29.045
Word Count Estimation 7,745
Date of Issue 7/24/2014
Date of Implementation 2/1/2015
Quoted Standard GB/T 14264; GB/T 25915.1-2010
Regulation (derived from) National Standards Bulletin No. 19, 2014
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the silicon carbide single wafer thickness and total thickness variation (TTV) of test methods, including contact and non-contact two ways. This standard applies to a diameter of not less than 30 mm, a thickness of 0.13 mm ~ 1 mm S

GB/T 30867-2014: Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers ICS 29.045 H83 National Standards of People's Republic of China SiC single wafer thickness and total thickness Changes in test methods Issued on. 2014-07-24 2015-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard equipment by the National Standardization Technical Committee and the semiconductor material (SAC/TC203) and materials Technical Committee (SAC/TC 203/SC2) jointly proposed and managed. This standard was drafted. China Electronics Technology Group Corporation forty-sixth Research Institute, China Electronics Standardization Institute. The main drafters of this standard. ARCHIVES INNER Hao Jian Min, Lin Xian, Hexiu Kun, Liu Yun, Pingya Bin, Peihui Chuan. SiC single wafer thickness and total thickness Changes in test methods

1 Scope

This standard specifies the silicon carbide single wafer thickness and total thickness variation (TTV) of test methods, including contact and non-contact two the way. This standard applies to a diameter of not less than 30mm, a thickness of 0.13mm ~ 1mm SiC single wafer.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 14264 semiconductor material terms GB/T 25915.1-2010 cleanroom and associated controlled environments - Part 1. air cleanliness level

3 Terms and Definitions

Terms and definitions GB/T 14264 apply to this document defined.

4 Method summary

4.1 contact measurement Contact measurement using a five-point method. 4 symmetrically on the circumference and the center of the silicon carbide single crystal silicon carbide from a single wafer edge D/10's SiC single position measuring wafer thickness, as shown in FIG. Single center of the wafer thickness nominal thickness, maximum 5 thickness measurements in And minimum value of the difference between the total thickness variation of silicon carbide single wafer. Description. Figure D is the diameter of the wafer of silicon carbide single. Measurement point position 1 contact measurement

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30867-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30867-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30867-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30867-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.