|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30202.1-2013: Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30202.1-2013 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density
| Valid |
GB/T 30202.1-2013
|
PDF similar to GB/T 30202.1-2013
Basic data | Standard ID | GB/T 30202.1-2013 (GB/T30202.1-2013) | | Description (Translated English) | Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D24 | | Classification of International Standard | 75.160.10 | | Word Count Estimation | 5,517 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of coal desulfurization and denitrification granular activated carbon (hereinafter referred to as active coke) bulk density measurement principles, procedures, and the results of calculation and so determined. This standard | GB/T 30202.1-2013: Test method for granular coal-based activated carbon for desulfurization and denitration process -- Part 1: Bulk density
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for granular coal-based activated carbon for desulfurization and denitration process Part 1.. Bulk density
ICS 75.160.10
D24
National Standards of People's Republic of China
Granular activated carbon coal quality test methods for desulfurization and denitrification
Part 1. bulk density
denitrationprocess-Part 1. Bulkdensity
Issued on. 2013-12-31
2014-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 30202 "desulphurization and denitrification granular activated carbon from coal test method" is divided into five sections.
--- Part 1. bulk density;
--- Part 2. particle size;
--- Part 3. abrasion resistance, compressive strength;
--- Part 4. desulfurization value;
--- Part 5. denitration rate.
This section GB/T Part of 130,202.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section proposed and managed by China North Industries Group Corporation.
This section is drafted. Shanxi Xinhua Chemical Co., Ltd.
The main drafters of this section. Lei Xueqing, Li Bing, Chi Kwong Sau, LI Huai-beads, Yang Jing, Ni Ping, Li Ruomei.
Granular activated carbon coal quality test methods for desulfurization and denitrification
Part 1. bulk density
1 Scope
GB/T 30202 provisions of this part of the desulfurization and denitrification granular activated carbon from coal (hereinafter referred to as active coke) Determination of bulk density of the original
Management, measurement procedures and results of the calculation and so on.
This section applies to the determination of bulk density of activated coke.
2 Principle of Measurement
The sample was slowly poured into a graduated cylinder to 1000mL engraved lines, weighing activated coke quality, mass per unit volume of activated coke for the bulk density.
3 instruments and equipment
3.1 Balance, dividing the value of 0.1g.
3.2 cylinder, 1000mL.
3.3 sieve shaker speed 280r/min ~ 320r/min, round trip 25mm, this test does not use slap function.
4 Sample preparation and
4.1 The sample was reduced to about 2000g, placed in 150 ℃ ± 5 ℃ electric oven, the dried 2h, out into the cold dryer
But spare.
4.2 Minimum aperture when the election of the sample size was measured using a sieve sieved 1min layer on a sieve shaker, to take part on the sieve spare.
5 measuring step
5.1 The sample was slowly poured into a graduated cylinder, 1000mL scale close-by grain added to 1000mL scale.
5.2 weighing sample quality, accurate to 0.1g.
6 calculated results
Bulk density ρ and its value in grams per liter (g/L) said, according to the formula (1).
ρ =
(1)
Where.
Numerical m --- sample mass, in grams (g);
Numerical V --- sample volume in liters (L).
|