GB/T 7702.6-2008 PDF in English
GB/T 7702.6-2008 (GB/T7702.6-2008, GBT 7702.6-2008, GBT7702.6-2008)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 7702.6-2008 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Test method for granular activated carbon from coal -- Determination of methylene blue adsorption
| Valid |
| GB/T 7702.6-1997 | English | 199 |
Add to Cart
|
2 days
|
Standard test method for granular activated carbon from coal--Determination of methylene blue adsorption
| Obsolete |
| GB/T 7702.6-1987 | English | RFQ |
ASK
|
3 days
|
Standard test method for methylene blue adsorption of granular activated carbon from coal
| Obsolete |
Standards related to (historical): GB/T 7702.6-2008
PDF Preview
GB/T 7702.6-2008: PDF in English (GBT 7702.6-2008) GB/T 7702.6-2008
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 75.160.10
D 24
Replacing GB/T 7702.6-1997
Test Method for Granular Activated Carbon from Coal -
Determination of Methylene Blue Adsorption
ISSUED ON. FEBRUARY 01, 2008
IMPLEMENTED ON. JULY 01, 2008
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 Principle ... 6
5 Reagents and materials... 6
6 Instruments and equipment ... 9
7 Test sample preparation ... 9
8 Determination procedures ... 9
9 Result calculations ... 10
10 Precision ... 10
11 Test report ... 10
Foreword
GB/T 7702 "Test Method for Granular Activated Carbon from Coal" is divided into.
— Part 1. Determination of Moisture;
— Part 2. Determination of Particle Size;
— Part 3. Determination of Hardness;
— Part 4. Determination of Packing Density;
— Part5. Determination of Absorption of Water;
— Part 6. Determination of Methylene Blue Absorption;
— Part 7. Determination of Iodine Number;
— Part 8. Determination of Phenol Absorption;
— Part 9. Determination of Ignition Temperature;
— Part 10. Determination of Service Life against Benzene and Chloroethane
Vapours;
— Part 13. Determination of CCL4 Vapour Absorption;
— Part14. Determination of Sulphur Capacity;
— Part 15. Determination of Ash Content;
— Part 16. Determination of pH Value;
— Part 17. Determination of Floatation Ratio;
— Part 18. Determination of Caramel Absorption;
— Part 19. Determination of Carbon Tetrachloride (CCl4) Desorption;
— Part 20. Determination of Pore Volume and Specific Surface Area.
This Part is part 6 of GB/T 7702.
This Part replaces GB/T 7702.6-1997 Standard test method for methylene blue adsorption
of granular activated carbon from coal.
Compared with GB/T 7702.6-1997, the main changes of this Part are as follows.
a) Specify the requirements of water used in laboratory;
b) Specify the level and specifications of filter paper used in analyzing process;
c) Add the eliminating method of moisture in methylene blue reagent;
d) Change the oscillation and adsorption time of test portion to methylene blue solution
from 20 min to 30 min;
e) Specify the calibration precision of methylene blue solution;
f) Specify the weighing range of test portion; improve the weighing accuracy;
g) Add Chapter 3 “Terms and definitions”.
This Standard was proposed by China North Industries Group Corporation.
Drafting organization of this Standard. Shanxi Xinhua Chemical Co., Ltd.
The chief drafting staffs of this Standard. Cheng Qingjun, Chi Guangxiu, Yuan Yidong,
Zhang Xu, Li Weibing, Zhao Jijun, and Li Ruomei.
This Standard was first-time issued in 1987, and revised in 1997 for the first revision.
Test Method for Granular Activated Carbon from Coal -
Determination of Methylene Blue Adsorption
1 Scope
This Part specifies the content such as determination principle, determination procedures,
and result calculation of methylene blue absorption of granular activated carbon from coal.
This section applies to the determination of methylene blue absorption of granular
activated carbon from coal and also applies to powdered activated carbon from coal.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute
provisions of this Part of GB/T 7702. For dated reference, the subsequent amendments
(excluding correction) or revisions of these publications do not apply. However, the parties
who enter into agreement based on this standard are encouraged to investigate the
possibility of applying the most recent editions of the standards. For undated references,
the latest edition of the normative document referred to applies.
GB/T 601-2002 Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 625 Chemical Reagent - Sulfuric Acid (GB/T 625-2007, ISO 6353-2. 1983,
NEQ)
GB/T 665 Chemical reagent – Copper (II) sulfate pentahydrate (GB/T 665-2007, ISO
6353-2. 1983, NEQ)
GB/T 1263 Chemical reagent - Disodium hydrogen phosphate dodecahydrate (GB/T
1263-2006, ISO 6353-2. 1983, NEQ)
GB/T 1272 Chemical reagent - Potassium iodide (GB/T 1272-2007, ISO 6353-2.
1983, NEQ)
GB/T 1274 Chemical reagent - Potassium dihydrogen phosphate (GB/T 1274-1993,
neq ISO 6353-3. 1987 R79)
GB/T 1914 Chemical analytical filter paper
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
(GB/T 6682-1992, neq ISO 3696.1987)
this filtrate AND absorbance reading of copper sulfate standard solution shall be within a
range of ±0.020.
8.4 If it is beyond the above range, it shall adjust the milliliters added to methylene blue
solution; repeat the operation in 8.1 to 8.3, until it meets requirements.
9 Result calculations
Methylene blue absorption, in E, its value is expressed in milligrams per gram (mg/g), is
calculated according to Formula (3).
VE ... (3)
Where.
ρ — Concentration of methylene blue solution, in milligrams per milliliter (mg/mL);
V — Volume of consumed methylene blue solution for sample determination, in
milliliters (mL);
m — Mass of test sample, in grams (g).
10 Precision
For each sample, make parallel determination of two test portions. The difference shall not
be greater than 8 mg/g. The results are expressed in arithmetic mean value. Calculation
results shall be accurate to integer.
11 Test report
Test report shall include the following aspects.
a) Serial number of test sample;
b) Standard used;
c) Method used;
d) Test item;
e) Test results;
f) Testing personnel;
g) Test date.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|