|
US$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29553-2013: Spinner cover of composites for wind power
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29553-2013 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Spinner cover of composites for wind power
| Valid |
GB/T 29553-2013
|
PDF similar to GB/T 29553-2013
Basic data | Standard ID | GB/T 29553-2013 (GB/T29553-2013) | | Description (Translated English) | Spinner cover of composites for wind power | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q23 | | Classification of International Standard | 83.120 | | Word Count Estimation | 10,169 | | Quoted Standard | GB/T 1447; GB/T 1449; GB/T 1451; GB/T 1591; GB/T 1804-2000; GB/T 2576; GB/T 2577; GB/T 3854; GB/T 8237; GB/T 13912; GB/T 17470; GB/T 18370; GB/T 18684 | | Regulation (derived from) | National Standards Bulletin 2013 No. 10 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: Wind Power composite fairing (hereinafter referred to as the fairing) terms and definitions, classification, structure and marking, general requirements, requirements, test methods, inspection rules, marking, transportation, stora | GB/T 29553-2013: Spinner cover of composites for wind power---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Spinner cover of composites for wind power
ICS 83.120
Q23
National Standards of People's Republic of China
Wind power composite fairing
Issued on. 2013-07-19
2014-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Building Materials Federation.
The standard fiber-reinforced plastic by the National Standardization Technical Committee (SAC/TC39) centralized.
This standard is drafted by. Bolong Three Dimensional Composites Co., Ltd., Beijing FRP Research and Design Institute Limited.
Participated in the drafting of this standard. Guangdong Mingyang Wind Power Industry Group Co., Ltd. gifted Coanda (Tianjin) Co., Ltd., Jiangsu Jiuding
New Material Co., Dongfang Turbine Co., Ltd., Xinjiang Yongchang New Material Technology Co., Ltd., a double Shandong Group Co., Ltd.
Division Shanghai FRP Research Institute Limited.
The main drafters of this standard. Huxiu Dong, Wu Boming, He Zhiyuan, Zhang Haiyan, Chang North Korea.
Wind power composite fairing
1 Scope
This standard specifies the wind composite fairing (hereinafter referred to as fairing) terms and definitions, classification, structure and marking, general
Requirements, requirements, test methods, inspection rules, marks, transportation, storage, installation, maintenance and repair.
This standard applies to the use of vacuum infusion, hand lay molding process for protecting the wind turbine hub composite shell.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Plastic tensile properties GB/T 1447 fiber reinforced
Plastic bending performance test method GB/T 1449 fiber reinforced
Methods plastic simply supported beam impact toughness test GB/T 1451 fiber reinforced
GB/T 1591 high strength low alloy structural steel
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance
GB/T 2576 non-fiber-reinforced plastic resin content test methods for melting points
Plastic resin content test method GB/T 2577 glass fiber reinforced
Plastic Barcol hardness test GB/T 3854 enhancements
GB/T 8237 fiber-reinforced plastic with a liquid unsaturated polyester resin
GB/T 13912 Metallic coatings Steel parts hot-dip galvanized layer of technical requirements and test methods
GB/T 17470 glass fiber chopped strand mat and continuous strand mat
GB/T 18370 fiberglass roving
GB/T 18684 zinc chromate coating technical conditions
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Fairing spinnercover
Hubcaps
With vacuum infusion, hand lay-up fabrication of composite parts, and other accessories in the form of a certain structure assembled to protect
Cover wind turbine hub.
4 classification, structure and marking
4.1 Classification
4.1.1 by wind power into the host 0.75MW, 0.85MW, 1.0MW, 1.25MW, 1.5MW, 2.0MW,
2.5MW, 3.0MW, 3.6MW, 5.0MW, 8.0MW and the like.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29553-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29553-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29553-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29553-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|