|
US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29183-2012: Infrared thermographic inspection -- General technical requirements of in-situ inspection on construction engineering
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29183-2012 | English | 349 |
Add to Cart
|
3 days [Need to translate]
|
Infrared thermographic inspection -- General technical requirements of in-situ inspection on construction engineering
| Valid |
GB/T 29183-2012
|
PDF similar to GB/T 29183-2012
Standard similar to GB/T 29183-2012 JJF 1234 GB/T 31004.1 JJF 1396 Basic data | Standard ID | GB/T 29183-2012 (GB/T29183-2012) | | Description (Translated English) | Infrared thermographic inspection -- General technical requirements of in-situ inspection on construction engineering | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A56 | | Classification of International Standard | 17.220 | | Word Count Estimation | 15,114 | | Quoted Standard | GB/T 12604.9; GB/T 20737; JJF 1187-2008 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method of infrared thermal imaging detector in the construction of the technical requirements of the project site. This standard applies to infrared thermography field testing building facades wet paste job quality decorative m | GB/T 29183-2012: Infrared thermographic inspection -- General technical requirements of in-situ inspection on construction engineering
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Infrared thermographic inspection. General technical requirements of in-situ inspection on construction engineering
ICS 17.220
A56
National Standards of People's Republic of China
Thermal imaging detector
General technical requirements for construction site
Issued on. 2012-12-31
2013-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 Technical conditions
5 3 site inspection
6 detects data processing and results expression 4
7 Test Report 5
General procedure in Appendix A (informative) infrared thermal image temperature data processing 6
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by China Association for Standardization.
This standard drafting unit. China Academy of Building Research, built in the Second Board Third Construction Company Limited, Rongsheng Construction Engineering Co.,
Beijing University of Science and Technology, Ministry of Communications Highway Research Institute, China Institute of Metrology, Earth Products Co., Ltd., Shenyang Construction
Engineering Quality Inspection Center, Chongqing Construction Engineering Quality Supervision and Testing Center Station, Sichuan Academy of Building Sciences, Capital Normal University,
Guangzhou SATIR Co., Ltd., Tianjin Construction Engineering Quality Inspection Center, Shenyang Jianzhu University, Guangxi Building Research Institute,
Beijing Dong Fang Jianyu Concrete Institute of Science and Technology, Ocean University of China, Shanxi Academy of Building Research.
The main drafters. Zhang Rongcheng, Li Jun, Song Jie, Xiaogang, national day Kui, Zhangren Yu, Xu before the election, Li Hongwen, the original compliance east, Zhang Yong,
Ge Miao, CEREALS new, first Qi Wen, Zhang Jianfeng, Zhang Cun-lin, Zhang Xiaoqing, Ye Jinting, Zhang Jiu red, Lijie Cheng, Wangan Ling, Jiang Ji same, Bo.
Thermal imaging detector
General technical requirements for construction site
1 Scope
This standard specifies the infrared thermal imaging method in the construction field testing of the technical requirements.
This standard applies to Thermal imaging field testing building facades wet paste job quality decorative materials, building thermal envelope defect structure,
Roof leaks, the building envelope airtightness, Port Engineering massive concrete surface defects, plant damage lining, industrial insulation effect really means
Construction quality recognition, quality asphalt paving and other construction projects.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 12604.9 Terminology for nondestructive testing infrared detector
GB/T 20737 Non-destructive testing - General terms and definitions
JJF1187-2008 thermal imager calibration specification
3 Terms and Definitions
GB/T 12604.9, GB/T 20737 and as defined in the following terms and definitions apply to this document.
3.1
Radiant Flux radiantflux
Per unit time in the form of radiation emission, propagation and reception of energy in watts (W).
3.2
Radiance radiance
Unit projected area in the unit solid angle from the source of radiation flux, in units of watts per square meter steradian.
3.3
Reflectance reflectance
Radiation reflected from the object surface flux incident on the ratio of the flux of radiation on the surface.
3.4
Emissivity emissivity
At a given temperature, a radiation brightness of the object and at the same temperature than the corresponding radiance of a blackbody.
3.5
Blackbody blackbody
For any incident direction and wavelength of the incident radiation can absorb all of the heat radiating body ideal. Also known as Planck's radiation radiator or completely
body. Its transmission rate is equal to 1.
3.6
Infrared radiation infraredradiation
Generally it refers to a wavelength band of 0.75μm ~ 1000μm electromagnetic waves.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29183-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29183-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29183-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29183-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|