|
US$1479.00 · In stock
Delivery: <= 10 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29001.5-2013: Numerical control system of machine tool -- Protocol specifications for NCUC-Bus fieldbus -- Part 5: Conformance testing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29001.5-2013 | English | 1479 |
Add to Cart
|
10 days [Need to translate]
|
Numerical control system of machine tool -- Protocol specifications for NCUC-Bus fieldbus -- Part 5: Conformance testing
| Valid |
GB/T 29001.5-2013
|
PDF similar to GB/T 29001.5-2013
Basic data | Standard ID | GB/T 29001.5-2013 (GB/T29001.5-2013) | | Description (Translated English) | Numerical control system of machine tool -- Protocol specifications for NCUC-Bus fieldbus -- Part 5: Conformance testing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J50 | | Classification of International Standard | 25.040.20 | | Word Count Estimation | 67,631 | | Quoted Standard | GB/T 29001.4-2012 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the CNC system NCUC-Bus data types and basic data transmission, established a communication protocol specification NCUC-Bus for CNC machine tools and industrial automation and control process enacted. GB/T 290011 of the standard de | GB/T 29001.5-2013: Numerical control system of machine tool -- Protocol specifications for NCUC-Bus fieldbus -- Part 5: Conformance testing
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Numerical control system of machine tool Protocol specifications for NCUC-Bus fieldbus Part 5. Conformance testing
ICS 25.040.20
J50
National Standards of People's Republic of China
CNC machine tools
NCUC-Bus Fieldbus protocol specification
Part 5. Conformance testing
Part 5. Conformancetesting
Issued on. 2013-12-31
2014-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions, abbreviations 1
3.1 Terms and definitions
3.2 Acronyms 3
4 4 Conformance Test System Architecture
4.1 Overview 4
4.2 Abstract Test Suite 4
4.3 executable test set 4
4.4 Conformance Testing Process 4
5 Conformance Test contents 5
5.1 OVERVIEW 5
5.2 bus state transition test group 7
5.3 test group command bus 29
5.4 Communication error detection and recovery test group 48
Appendix A (normative) Conformance Test System Platform 54
Appendix B (Normative Appendix) PICS document specification 59
References 62
Foreword
GB/T 29001 "CNC system NCUC-Bus Fieldbus protocol specification" is divided into 16 parts.
--- Part 1. General;
--- Part 2. Physical layer;
--- Part 3. Data link layer;
--- Part 4. Application layer;
--- Part 5. Conformance testing;
--- Part 6. Real-time test;
--- Part 7. interoperable testing;
--- Section 8 - Section 15 reserved;
--- Part 16. Safety.
This section GB/T 29001 Part 5.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Please note that this document may involve some elements of the patent, the issuing authority of this document does not assume responsibility for the identification of these patents.
This part is proposed by China Machinery Industry Federation.
This part of CNC machine tools by the National Technical Committee of Standardization System (SAC/TC367) centralized.
This part mainly drafted by. Zhejiang Control Research Institute Co., Wuhan Huazhong Numerical Control Co., Ltd. Guangzhou CNC Equipment
The company, Shenyang high-precision CNC Technology Co., Ltd., Dalian Koyo Technology Engineering Company Limited.
The main drafters of this section. Pan regeneration, Chen roots, FENG Dong-qin, SONG Bao, Tang Xiaoqi, Jin Jian, He Yingwu, Zhang Yujie, Mo Yuan Jin, Yang Dongsheng,
Hu Yi, Chen Hu, Wang Sheng-wen.
Introduction
Statements are based NCUC-Bus field bus standard products in the technology must meet NCUC-Bus standard fieldbus technology, should be able to
Enough with third NCUC-Bus interconnect products.
NCUC-Bus conformance testing for the detection based NCUC-Bus standard product meets the requirements and specifications of NCUC-Bus
Documentation requirements, NCUC-Bus interoperable test is used to test and verify the different types, different functions NCUC-Bus synergies between products
Ability to work. Conformance testing is the basis for interoperability testing, and only through conformance testing of products shown to be consistent with NCUC-Bus Online
, Meaningful field bus standard interoperable protocols were tested.
To test based NCUC-Bus field bus standard products to achieve compliance NCUC-Bus standard fieldbus technology to achieve
Products from different manufacturers interconnection and interoperability must NCUC-Bus conformance testing and test interoperable. Therefore, it is necessary to develop this Part
Sub-standard for conformance testing specification NCUC-Bus system architecture and content.
CNC machine tools
NCUC-Bus Fieldbus protocol specification
Part 5. Conformance testing
1 Scope
GB/T 29001 specifies the CNC system NCUC-Bus data types and basic data transmission, established NCUC-
Bus communication protocol specification for CNC machine tools and industrial automation and control processes developed.
This section GB/T 29001 defines the system configuration and test content NCUC-Bus conformance testing.
This section applies to a statement based NCUC-Bus standard conformance testing CNC system and its components. Other purposes
CNC system can refer to this section.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 29001.4-2012 CNC system NCUC-Bus Fieldbus protocol specification - Part 4. Application Layer
3 Terms and definitions, abbreviations
GB/T 29001.1 defined and the following terms and definitions apply to this document. For ease of use, repeat the following list
GB/T 29001.1 of certain terms and definitions.
3.1 Terms and Definitions
3.1.1
Agreement protocol
The communication system for data exchange in the data format, error correction method and timing relationships conventions.
[GB/T 29001.1-2012, the definition 3.1.1]
3.1.2
Bus bus
Refers to time division multiplexed manner, information is transferred from one or more source components to a group of one or more destination transmission line components, it is
Communication system transmitting data in a common channel.
[GB/T 29001.1-2012, the definition 3.1.2]
3.1.3
Equipment device
It means a physical entity in the communication network, having a specific functional behavior, such as numerical control device NCUC-Bus network access, servo drive
I/O devices or actuating means. Each device has a unique device address in NCUC-Bus in.
[GB/T 29001.1-2012, the definition 3.1.6]
3.1.4
Master masterdevice
Network initiating device communications. NCUC-Bus agreement in a NCUC-Bus loop can be only one master device, usually
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29001.5-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29001.5-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 10 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29001.5-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29001.5-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|