|
US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28393-2012: Road construction and road maintenance machinery and equipment -- Synchronous chips seal truck
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28393-2012 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Road construction and road maintenance machinery and equipment -- Synchronous chips seal truck
| Valid |
GB/T 28393-2012
|
PDF similar to GB/T 28393-2012
Basic data | Standard ID | GB/T 28393-2012 (GB/T28393-2012) | | Description (Translated English) | Road construction and road maintenance machinery and equipment -- Synchronous chips seal truck | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P97 | | Classification of International Standard | 91.220 | | Word Count Estimation | 29,261 | | Quoted Standard | GB 1495; GB 1589; GB/T 3766; GB 3847; GB 4785; GB/T 6420; GB 7258; GB/T 9969; GB 11567.1; GB 11567.2; GB/T 12536; GB/T 12539; GB/T 12540; GB/T 12543; GB/T 12544; GB/T 12547; GB 12676; GB/T 16710.4; GB/T 16710.5; GB 16735; GB/T 17300; GB/T 18411; GB 20178; | | Regulation (derived from) | National Standards Bulletin No. 9 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the synchronization sealer asphalt macadam terms and definitions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage and so on. This standard applies to asphalt macadam synchroniz | GB/T 28393-2012: Road construction and road maintenance machinery and equipment -- Synchronous chips seal truck
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS91.220
P97
National Standards of People's Republic of China
Road construction and maintenance machinery and equipment asphalt macadam
Synchronization sealer
Issued on. 2012-10-01 2012-05-11 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 2 Technical Requirements
Test Method 5 5
14 6 Inspection Rules
7 Sampling 15
8 signs, instructions, packaging, transportation and storage 15
Appendix A (normative) bitumen macadam synchronization sealer test records 17
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
The standard proposed by China Machinery Industry Federation.
This standard by the national construction machinery and construction equipment Standardization Technical Committee (SAC/TC328) centralized.
This standard was drafted. Xi'an Dagang Road Machinery Co., Ltd., Xi'an Road Construction Machinery Testing Center, Zhejiang PR machinery has
Ltd., Xuzhou Construction Machinery Research Institute, Shenzhen City, measuring Detection Technology Co., Ltd., Beijing Institute of Construction Mechanization, Shenyang North
Party Traffic Heavy Industry Group Co., Ltd.
The main drafters of this standard. Xie Liyang, Litai Jie Hu Cheng Luan, Wu Lingyun, Zhu Ping, Jiang Hui, Huang Fu Jian-hong, Palace Yongjie, Mengqing Yong,
ROCKETS, Sun Huashan, Zhao Yanjun.
Road construction and maintenance machinery and equipment asphalt macadam
Synchronization sealer
1 Scope
This standard specifies the asphalt sealer gravel synchronization of terms and definitions, technical requirements, test methods, inspection rules, marking, packaging, transportation
And storage and so on.
This standard applies to asphalt gravel synchronous sealer.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 1495 vehicle acceleration with the vehicle noise limits and measurement methods
GB 1589 road vehicles outside the gallery dimensions, axle load limits and quality
GB/T 3766 General technical conditions for hydraulic systems
GB 3847 Vehicle compression-ignition engines and compression-ignition engine vehicle exhaust smoke emission limits and measurement methods
GB 4785 Installation instructions car and trailer exterior lighting and light signaling devices
GB/T 6420 series spectrum cargo trailer
GB 7258 safe operation of motor vehicles technical conditions
GB/T 9969 General Industrial Product Manual
GB 11567.1 car and trailer side protection requirements
GB 11567.2 car and trailer rear underrun protection requirements
GB/T 12536 car coasting test method
Steep Test methods GB/T 12539 cars climb
GB/T 12540 car Minimum turning diameter, the minimum clearance circle and placed outside the measurement method
GB/T 12543 vehicle acceleration performance test method
GB/T 12544 cars top speed test method
GB/T 12547 car lowest steady speed test method
GB 12676 vehicle braking system architecture, performance and test methods
Determination of exterior noise under GB/T 16710.4 machinery - Dynamic test conditions
Measurement at the operator position of noise GB/T 16710.5 machinery - Dynamic test conditions
GB 16735 Road vehicles - Vehicle identification number (VIN)
GB/T 17300 moving machinery passage means
GB/T 18411 product label road vehicles
GB 20178 moving machinery - Safety signs and hazard pictorials General
JB/T5943 Construction Machinery welding parts General technical requirements
JB/T5945 General technical conditions of construction machinery assembly
JB/T5946 General technical conditions of construction machinery painting
JB/T9723 Construction Machinery minimum entry size
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28393-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28393-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28393-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28393-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|