|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28173-2011: Embedded systems -- Application and management of the systems engineering process
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 28173-2011 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Embedded systems -- Application and management of the systems engineering process
| Valid |
GB/T 28173-2011
|
PDF similar to GB/T 28173-2011
Basic data | Standard ID | GB/T 28173-2011 (GB/T28173-2011) | | Description (Translated English) | Embedded systems -- Application and management of the systems engineering process | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L77 | | Classification of International Standard | 35.080 | | Word Count Estimation | 26,251 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-06-01 | | Quoted Standard | GB/T 11457; GB/T 22033 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies systems engineering process in the embedded system applications, and life cycle management of the establishment of a framework for implementation. This standard applies to embedded systems development, production, verification and management. | GB/T 28173-2011: Embedded systems -- Application and management of the systems engineering process
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Embedded systems. Application and management of the systems engineering process
ICS 35.080
L77
National Standards of People's Republic of China
Embedded systems management and systems engineering process applications
Issued on. 2011-12-30
2012-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Systems engineering process model used in embedded systems 4 1
4.1 1 Review
Specific activities 4.2 systems engineering process 2
5 throughout the life cycle of embedded systems System Engineering 5
5.1 Summary 5
5.2 System Concepts Phase 5
5.3 Development Stage 6
5.4 Import system validation and production stage 12
5.5 Production/Maintenance/Support phase 13
5.6 Disposal of decommissioning stage 14
6 embedded system applications of systems engineering management requirements 14
6.1 Summary 14
6.2 Project planning and management 15
6.3 Documentation Development Management 15
6.4 Configuration Management 16
6.5 Product Data Management 16
6.6 Quality Assurance 16
6.7 Risk Management 17
Process measurement 18 6.8
7 Compliance 19
Tailoring Guide Appendix A (normative) embedded systems implementation of the system engineering process 20
References 21
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.
This standard was drafted. China Electronics Standardization Institute, Zhuhai Southern Software Testing Center, Actions Semiconductor has
Ltd., XJ Electric Co., Ltd. Zhuhai, Shenzhen City Jiyang Automation Technology Co., Ltd., Hai Botai Yue Zhen Electronic Equipment Manufacturing Co.,
Secretary, Zhuhai Meizu Technology Co., Ltd., Hunan Software Testing Center, Shanghai Embedded System Engineering Research Center, and Shanghai Supercomputer
Line Software Co., Ltd., Shanghai Information Technology Co., Ltd. Lu Qixin.
The main drafters of this standard. Pan Ocean, Hou Jianhua, Qi Jianhua, Yan Lihua, Tang Ling, Liu Chang, Zhang Yang Yang, Yang Zhejun, Wang Nian, Qin Weidong,
Kun Yang, such as, in Xiaojing, Zhang new exhibition, Qian Xiao Qing, Xu Yanchun.
Introduction
Embedded systems since the advent of the 1970s, has been widely used in consumer electronics, communications, medical and industrial production fields.
With the rapid growth of the embedded systems market, which has brought new opportunities, but also to the production and use of embedded systems has brought new
challenge.
Systems engineering refers to the scientific approach to planning, research, design, manufacturing, testing and use of the organization and management system, is a complex of all
Systems have universal significance scientific method. Since the 1940s, the system works have been widely applied to military systems, economic systems,
Various aspects of population systems, social systems, geographical systems, regional planning, energy, transportation and communications, to receive good results.
The combination of standard features and embedded systems development practice, provides a frame for the application of systems engineering and management of embedded systems
frame. The framework covers the whole process of embedded system life cycle, phase until decommissioning stage from conception, the framework can be used to control and improve
These procedures.
The standard procedure is an extensive collection, an organization can choose a subset of the purpose in accordance with its objectives. Therefore, the standard
Quasi designed to make a specific organization, project or application to be trimmed. Whether embedded hard/software is a stand-alone entity, or embedded
Systems or components of the system can use this standard.
Embedded systems management and systems engineering process applications
1 Scope
This standard systems engineering process applications and embedded systems life cycle management establishes a framework for implementation.
This standard applies to the development, production, management and verification of embedded systems.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11457 IT software engineering terminology
GB/T 22033 IT embedded systems terminology
3 Terms and Definitions
GB/T 11457 and GB/T 22033 and defined by the following terms and definitions apply to this document.
3.1
Embedded Systems embeddedsystem
Placed inside the app object from the information processing and controlling role of professional computing (computer) systems.
NOTE. Embedded Systems application-centric, computer technology, software and hardware can be cut, its hardware comprises at least one microcontroller, microprocessor or
A digital signal processor unit. The system can meet the application system functionality, performance, cost, size, power consumption strict comprehensive requirements.
3.2
Demand-side acquirer
Acquire or purchase embedded systems, organizational products or services from the supply side.
Note. The demand side can be a buyer, customer, owner, user or one of the buyers.
3.3
Get acquisition
Get embedded systems, products or services in the process.
3.4
Protocol agreement
Terms and conditions for the implementation of the mutual recognition of the relationship.
3.5
System system
By the assembly process, hardware, software, facilities and personnel provided to meet specific requirements or goals.
Systems Engineering Process Model 4 used in embedded systems
4.1 Summary
This chapter defines the systems engineering process used in embedded systems and general requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28173-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28173-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 28173-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28173-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|