HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 27696-2011 English PDF

US$394.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27696-2011: Forged steel eyebolts grade 4 for general lifting purposes
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 27696-2011English394 Add to Cart 3 days [Need to translate] Forged steel eyebolts grade 4 for general lifting purposes Valid GB/T 27696-2011

PDF similar to GB/T 27696-2011


Standard similar to GB/T 27696-2011

GB/T 24818.4   GB/T 23724.1   GB/T 24809.2   GB/T 27697   GB/T 27697   GB 27695   

Basic data

Standard ID GB/T 27696-2011 (GB/T27696-2011)
Description (Translated English) Forged steel eyebolts grade 4 for general lifting purposes
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J80
Classification of International Standard 53.020.30
Word Count Estimation 20,247
Date of Issue 2011-12-30
Date of Implementation 2012-06-01
Quoted Standard GB/T 16825.1-2008; ISO 148-1; ISO 148-2; ISO 261; ISO 643; ISO 965-1; ISO 6506-1; ISO 6508-1; ISO/IEC 17025; EN 10228-1; EN 10228-2
Adopted Standard ISO 3266-2010, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 22 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the general lifting eyebolts with 4 forged the basic parameters, performance and critical dimensions of these characteristics on the eyebolt with other parts interchangeability and equipped with necessary. Such eyebolts can be used for vertical and oblique lifting loads. This standard specifies the eyebolts and eye dimensions suitable for use with GB/T 25854 defined with the same working load limit shackle directly attached. Can also be designed and eye size larger so that you can work with the same limit load chain hook assembly directly attached. Chapter 4 of this standard are identified with four eyebolts all significant risk factors relating to dangerous conditions and injuries. This standard specifies four eyebolts use temperature range is -20��C ~ +200��C. This standard does not apply to non-integral forged eyebolts. This standard does not apply to the standard pre-release made ??four forged eyebolts.

GB/T 27696-2011: Forged steel eyebolts grade 4 for general lifting purposes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Forged steel eyebolts grade 4 for general lifting purposes ICS 53.020.30 J80 National Standards of People's Republic of China General lifting four forged eyebolts (ISO 3266.2010, IDT) Issued on. 2011-12-30 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 major risk factors Table 3 Dimensions and tolerances 4 5 5 6 Thread 7 Process 5 8 Material 6 9 6 heat treatment Hardness 10 6 11 Mechanical properties 7 12 Type test 8 13 factory test 9 14 10 Flag 15 factory certification 10 16 usage information 11 Recommend choosing Appendix A (informative) eyebolts, maintenance and use 12 References 14

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 3266.2010 "general lifting four forged eyebolts." Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 193 series ordinary thread diameter and pitch (GB/T 193-2003, ISO 261.1998, MOD); --- GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1.1998, MOD); --- GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Feet) (GB/T 230.1-2009, ISO 6508-1.2005, MOD); --- GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1.2005, MOD); --- GB/T 229 metal Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1.2006, MOD); --- GB/T 3808 pendulum impact testing machines (GB/T 3808-2002, ISO 148-2.1998, MOD); --- GB/T 27025 testing and calibration laboratories General requirements (GB/T 27025-2008, ISO /IEC 17025. 2005, IDT). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee crane (SAC/TC227) centralized. This standard by the Beijing Materials Handling Research Institute is responsible for drafting the design. The main drafters of this standard. He uranium.

Introduction

The standards are GB/T 15706 in the divided class C standard. In the scope of this standard it is indicated in four forged eyebolts and associated risk factors involved, dangerous conditions and injury events. For equipment designed and manufactured according to the class C standard, when certain predetermined criteria for Class C and Class A or Class B standard regulations vary At the same time, it should be given priority C class standards. General lifting four forged eyebolts

1 Scope

This standard specifies the general lifting four forged eyebolts basic parameters, performance and critical dimensions, these characteristics of the eyebolts And compatibility with the other components equipped with necessary. Such eyebolts can be used for vertical and oblique lifting loads. This standard specifies the size of the eye for eye bolts and shackles for the same working load limit of GB/T 25854 defined Directly attached. Can also be designed larger size and eye, so that the chain can hook assembly have the same working load limit directly attached. The standard Chapter 4 identified all major risk factors related to 4 eyebolts, dangerous conditions and damage events. The standards required four eyebolts temperature range of -20 ℃ ~ 200 ℃. This standard does not apply to non-integral forged eyebolts. This standard does not apply to standard before publication produced four forged eyebolts.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Check tension and (or) pressure testing machine force measuring system. GB/T 16825.1-2008 static uniaxial testing machines - Part 1 Test and calibration (ISO 7500-1.2004, IDT) ISO 148-1 metallic materials - Charpy pendulum impact test - Part 1. Test method (Metalicmaterials-Charpy pendulumimpacttest-Part 1. Testmethod) Identification of the test machine (Metalicmaterials-. ISO 148-2 summer metallic materials testing - Part 2 pendulum impact than Charpypendulumimpacttest-Part 2. Verificationoftestingmachines) ISO 261 ISO general purpose metric thread diameter and pitch series (ISO generalpurposescrewthreads- Generalplan) Micrographics Determination of ISO 643 steel surface granularity (Steels-Micrographicdeterminationoftheapparent grainsize) ISO 965-1 ISO general purpose metric screw threads - Tolerances - Part 1. Principles and basic data (ISO generalpurpose metricscrewthreads-Tolerances-Part 1. Principlesandbasicdata) ISO 6506-1 metallic materials Brinell hardness test - Part 1. Test method (Metalicmaterials-Brinel hardnesstest-Part 1. Testmethod) ISO 6508-1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Feet) [Metalicmaterials-Rockwelhardnesstest-Part 1. Testmethod (scalesA, B, C, D, E, F, G, H, K, N, T)] ISO /IEC 17025 General requirements for testing and calibration laboratories (Generalrequirementsforthecompetenceof testingandcalibrationlaboratories) EN10228-1 destructive testing of steel forgings - Part 1. Magnetic particle testing (Non-destructivetestingofsteelforgings- Part 1. Magneticparticleinspection) EN10228-2 destructive testing of steel forgings - Part 2. penetrant testing (Non-destructivetestingofsteelforgings- Part 2. Penetranttesting)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27696-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27696-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27696-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27696-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.