|
US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27476.3-2014: Safety in testing laboratories -- Part 3: Mechanical aspects
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 27476.3-2014 | English | 599 |
Add to Cart
|
5 days [Need to translate]
|
Safety in testing laboratories -- Part 3: Mechanical aspects
| Valid |
GB/T 27476.3-2014
|
PDF similar to GB/T 27476.3-2014
Basic data | Standard ID | GB/T 27476.3-2014 (GB/T27476.3-2014) | | Description (Translated English) | Safety in testing laboratories -- Part 3: Mechanical aspects | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | C78 | | Classification of International Standard | 13.100 | | Word Count Estimation | 26,276 | | Date of Issue | 12/5/2014 | | Date of Implementation | 12/15/2014 | | Quoted Standard | GB 1002; GB 1003; GB 3883.1; GB 3883.2; GB 3883.3; GB 3883.4; GB 3883.5; GB 3883.6; GB 3883.7; GB 3883.8; GB 3883.9; GB 3883.10; GB 3883.11; GB 3883.12; GB 3883.13; GB 3883.14; GB 3883.15; GB 3883.16; GB 3883.17; GB 3883.18; GB 3883.19; GB 3883.20; GB 388 | | Regulation (derived from) | Announcement of Newly Approved National Standards 2014 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the safety requirements for testing laboratories (hereinafter referred to as laboratory) and mechanical factors related. This section applies to testing laboratories, calibration and research laboratories can refer to use. This sec | GB/T 27476.3-2014: Safety in testing laboratories -- Part 3: Mechanical aspects---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety in testing laboratories Part 3.. Mechanical aspects
ICS 13.100
C78
National Standards of People's Republic of China
Safety testing laboratory
Part 3. Mechanical Factors
Issued on. 2014-12-05
2014-12-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
2 4 Safety management requirements
5 Safety requirements 3
5.1 hazard identification and risk assessment 3
5.2 3 persons
5.3 Accommodation and environmental 4
5.4 device 6
5.5 Detection 9
5.6 Material 9
Security Appendix A (normative) Common equipment requirements 14
References 21
Foreword
GB/T 27476 "Safety Testing Laboratory" is divided into the following sections.
--- Part 1. General;
--- Part 2. Electric factor;
--- Part 3. mechanical factors;
--- Part 4. Non-ionizing radiation factors;
--- Part 5. chemical factors.
This part of GB/T 27476 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points.
This section drafted by. China National Accreditation Center, Shanghai Exit Inspection and Quarantine, Fujian Province, product quality inspection study
Hospital, Zhejiang Inspection & Quarantine Technology Center, Guangdong Product Quality Supervision and Inspection Institute, China Electric Apparatus Research Institute have
Limited (Weikai Detection Technology Co., Ltd.), Stephen Peak (China) Co., Ltd. CHEONG-testing center.
The main drafters of this section. Fupei Gang, CAO, ginger Chou Shi Ji, Yi Ni Lin, Zhang Jihong, Chen Yujun, Li Zhihong, Cai Yonghua, Chen Xiaojian,
WANG Xiu, Chen Qin, He Yong, Ji Liming, Zhang sequence stars.
Introduction
Testing laboratories during operation may involve electrical, mechanical, non-ionizing radiation, ionizing radiation, chemical and microbiological and other risk factors
Su, GB/T 27476 for these risk factors and the development of safety standards testing laboratory, testing laboratory aims to enhance safety management
Technical capabilities and security capabilities, reduce security risk detection laboratory operation.
GB/T 27476 is adapted to detect a series of laboratory safety standards, and professional field laboratory safety standards promulgated by the now common
Composition testing laboratory safety standards.
Safety testing laboratory
Part 3. Mechanical Factors
1 Scope
This section GB/T 27476 specifies the safety requirements for testing laboratories (hereinafter referred to as laboratory) and mechanical factors related.
This section applies to testing laboratories, calibration and research laboratories can refer to use. This section applies to a fixed place in the laboratory, the
His laboratory premises can refer to use, but may require additional requirements.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 1002 Household and similar single-phase plugs and socket type, basic parameters and dimensions
GB 1003 Household and similar three-phase plug and socket type, basic parameters and dimensions
Safety GB 3883 (all parts), hand-held power tools
GB/T 5023.1 rated voltage of 450/750V and below PVC insulated cables - Part 1. General requirements
GB 7144 cylinders color logo
Basic identification colors GB 7231 industrial piping, identifying symbols and safety identification
GB 8965.2 protective clothing flame retardant protection - Part 2. Welding clothes
GB/T 12624 Hand protection General technical requirements and test methods
GB 13960 (all parts), Safety of transportable electric tools
GB 14866 personal eye protectors technical requirements
GB 15382 cylinder valves - General technical requirements
GB 20300 road transport explosives and toxic chemicals vehicle safety and technical conditions
GB/T 23466 Guide for Selection of hearing protectors
GB/T 27476.1-2014 testing laboratory Safety - Part 1. General
GB 50057 Lightning in design
GB 50311 cabling system design specification
3 Terms and Definitions
GB/T 27476.1-2014 and as defined in the following terms and definitions apply to this document.
3.1
Failsafe failsafe
When a component failure, without increasing the design hazards.
3.2
Safety interlocks safetyinterlock
Before danger exclusion can prevent exposure to hazardous areas, or in the event of contact with a device that automatically exclude a dangerous situation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27476.3-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 27476.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 27476.3-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27476.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|