HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 2677.2-2011 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2677.2-2011: Determination of moisture content in fibrous raw material
Status: Valid

GB/T 2677.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 2677.2-2011English139 Add to Cart 3 days [Need to translate] Determination of moisture content in fibrous raw material Valid GB/T 2677.2-2011
GB/T 2677.2-1993English199 Add to Cart 2 days [Need to translate] Fibrous raw meterial-Determination of moisture content Obsolete GB/T 2677.2-1993

PDF similar to GB/T 2677.2-2011


Standard similar to GB/T 2677.2-2011

GB/T 2678.2   GB/T 2679.1   GB/T 1541   GB/T 2678.6   

Basic data

Standard ID GB/T 2677.2-2011 (GB/T2677.2-2011)
Description (Translated English) Determination of moisture content in fibrous raw material
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y30
Classification of International Standard 85-010
Word Count Estimation 6,687
Date of Issue 2011-12-30
Date of Implementation 2012-09-01
Older Standard (superseded by this standard) GB/T 2677.2-1993
Quoted Standard GB/T 2677.1
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the papermaking raw material moisture measurement method. This standard applies to all kinds of paper material assay of moisture content.

GB/T 2677.2-2011: Determination of moisture content in fibrous raw material

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of moisture content in fibrous raw material ICS 85-010 Y30 National Standards of People's Republic of China Replacing GB/T 2677.2-1993 Determination of paper material moisture Issued on. 2011-12-30 2012-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 2677.2-1993 "paper-making raw material moisture determination." This standard compared with GB/T 2677.2-1993, the main technical changes are as follows. --- Increased define test principle and constant weight; --- Expanded sample size ranges; --- Increase the drying time of large sample volume of the sample; --- Survey margin of error between two measurements. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by China National Light Industry Council. The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized. This standard was drafted. China Pulp and Paper Research Institute, Sichuan paper Product Quality Supervision and Inspection Center, the State Quality Supervision, Inspection paper Test center. The main drafters of this standard. high SOCIALIST Wang Huajun. This standard replaces the standards previously issued as follows. --- GB/T 2677.2-1981, GB/T 2677.2-1993. Determination of paper material moisture

1 Scope

This standard specifies the method for determination of papermaking material moisture. This standard applies to all kinds of paper-making raw material analysis measurement sample of water used.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2677.1 papermaking material sample taken for analysis

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Water moisturecontent Prescribed method of sample before drying to constant weight by reducing the quality and drying weighed mass ratio, usually expressed as a percentage. 3.2 Constant weight constantweight Drying the sample at a predetermined temperature, until two consecutive weighing, the poor quality of the sample before drying does not exceed 0.1% of the sample mass , That constant weight is reached. Principle 4 Weigh the sample mass before drying, and then the sample is dried to constant weight, weighed mass again. Before the poor quality of the sample before and after drying and drying Mass ratio, that is, the water sample.

5 Instruments

5.1 Balance. a sense of the amount of 0.0001g. 5.2 Container. for sample transfer and weighing. The container should be able to prevent the water vapor, and less prone to changes in the material under test conditions production. 5.3 Oven. maintain a constant temperature at 105 ℃ ± 2 ℃. 5.4 dryer.

6 Sampling

According to GB/T 2677.1 predetermined sampling time does not have to GB/T 2677.1 predetermined sampling conditions should be randomly stacked from raw materials

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2677.2-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2677.2-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2677.2-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2677.2-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2677.2-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2677.2-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.