Search result: GB/T 26714-2019 (GB/T 26714-2011 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26714-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Ball point pens and refills
| Valid |
GB/T 26714-2019
|
| GB/T 26714-2011 | English | 85 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Ball point pens and refills [including 2015 MODIFICATION 1]
| Obsolete |
GB/T 26714-2011
|
| Standard ID | GB/T 26714-2019 (GB/T26714-2019) | | Description (Translated English) | Ball point pens and refills | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y50 | | Classification of International Standard | 97.180 | | Word Count Estimation | 18,174 | | Date of Issue | 2019-08-30 | | Date of Implementation | 2020-03-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 26714-2019
Ball point pens and refills
ICS 97.180
Y50
National Standards of People's Republic of China
Replace GB/T 26714-2011
Ink ballpoint pen and refill
[ISO 12757-1.2017, Balpointpensandrefils-Part 1. Generaluse;
ISO 12757-2.1998, Balpointpensandrefils-
Part 2. Documentaryuse (DOC), MOD]
Published on.2019-08-30
2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 26714-2011 "Ink ballpoint pen and refill". Major technical changes compared to GB/T 26714-2011
as follows.
--- Added terms and definitions (see Chapter 3);
--- Increased structural classification and use classification (see 4.3, 4.4);
---Modified refill tolerance dimensions (see Table 2, Table 2 of the.2011 edition);
--- Increased the specification of writing paper (see 6.2, 5.2 of.2011 edition);
--- Removed the elastic requirements and test methods for metal pen holders (Tables 5 and 6.16 of the.2011 edition);
--- Removed the provisions of the sample (5.3 of the.2011 edition);
---Modified environmental conditions (see 6.3, 5.4 of the.2011 edition);
--- Modified the test method for the initial performance test (see 7.1,.2011 version 6.1);
--- Revised the test method for drying (see 7.4,.2011 edition 6.4);
---Modified the test method for the difference between the aperture of the pen head and the outer diameter of the pen tip (see 7.15, 6.15 of the.2011 edition);
--- Removed the shelf life (8.4.2 of the.2011 edition).
This standard uses the redrafting method to modify the use of ISO 12757-1.2017 "ink ballpoint pen and refill part 1. general writing" and
ISO 12757-2.1998 "Ink ballpoint pens and refills - Part 2. Document writing".
Compared with ISO 12757-1.2017 and ISO 12757-2.1998, this standard has more structural adjustments. Appendix A lists this
The standard and ISO 12757-1.2017 and ISO 12757-2.1998 chapter number change comparison checklist.
There are technical differences between this standard and ISO 12757-1.2017 and ISO 12757-2.1998. Appendix B gives the corresponding technology.
A list of sexual differences and their causes.
This standard also made the following editorial changes.
--- Integrate ISO 12757-1.2017 and ISO 12757-2.1998 into one standard, change the standard name to "Ink ballpoint pen and pen
core".
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard was proposed by the China Light Industry Association.
This standard is under the jurisdiction of the National Pen Standardization Technical Committee (SAC/TC378).
This standard was drafted. Zhencai Stationery Co., Ltd., Beifa Group Co., Ltd., Shanghai Pen Industry Research Institute, Shanghai Morning
Light Stationery Co., Ltd., Shandong Yizhi Pen Culture Technology Co., Ltd., Yiwu Meineng Pen Industry Co., Ltd., Qingdao Changlong Stationery Co., Ltd.
Division, Fengcheng Sanyou Pen Technology Co., Ltd., Guangdong Jinwannian Stationery Co., Ltd., Shanghai Wenzheng Pen Co., Ltd., Deli Group Co., Ltd.
Division, Guangbo Group Co., Ltd., Guangdong Baoke Stationery Co., Ltd., Guangdong Zhigao Culture and Creative Co., Ltd., Shaoguan Shengyiwen
Company, Shenzhen Qixin Group Co., Ltd., Suzhou Xiongying Penmo New Material Co., Ltd., Wenzhou Hobby Pen Co., Ltd., Wenzhou City
Feng Stationery Co., Ltd., Wenzhou Wentai Pen Industry Co., Ltd., Wenzhou Tianjiao Pen Industry Co., Ltd.
The main drafters of this standard. Wu Hao, Huang Xiaolei, Liu Xiuzhen, Zhang Fang, Long Shuiyun, Chen Jingqiang.
The previous versions of the standards replaced by this standard are.
---GB 4306-1984, GB/T 4306-1992;
---GB/T 26714-2011.
Ink ballpoint pen and refill
1 Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transportation, and ink ballpoint pens and refills.
Storage.
This standard is applicable to ink ballpoint pens (including core-changing and non-replaceable core) and refills for general writing and document writing (hereinafter referred to as "circle"
Ballpoint pen and "refill").
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL
(GB/T 2828.1-2012, ISO 2859-1..1999, IDT)
GB/T 12654-2008 writing paper
GB 21027 General requirements for the safety of student supplies
QB/T 2309-2010 eraser
ISO 12756 Drawing and Writing Instrument Ink Ballpoint Pen and Water-based Ballpoint Pen Vocabulary (Drawingandwritinginstru-
ments-Balpointpensandrolerbalpens-Vocabulary)
3 Terms and definitions
The terms and definitions defined by ISO 12756 apply to this document. For ease of use, the following repeats one of ISO 12756
These terms and definitions.
The ISO maintains a terminology database for standardized use at the following URL.
3.1
Ink ballpoint pen balpointpen
In addition to the neutral ink ballpoint pen, a ballpoint pen having a dynamic viscosity of more than 1000 mPa·s (1000 cP) at (23 ± 2) °C was used.
Note. In ISO 27668-1, the neutral ink ballpoint pen is defined as a ballpoint pen, which stops the ink viscosity due to the rotation of the ball during writing.
The viscosity rises to or near the static viscosity when writing.
4 classification
4.1 Tip classification
The tip of the pen is classified according to the diameter of the ball as shown in Table 1.
......
GB/T 26714-2011
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
Ball point pens and refills
[ISO 12757-1.1998, Ball point pens and refills –
Part 1. General use; ISO 12757-2.1998, Ball point pens and refills –
Part 2. Documentary use (DOC), MOD]
ISSUED ON. JUNE 16, 2011
IMPLEMENTED ON. DECEMBER 1, 2011
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative references ... 6
3 Classification ... 6
4 Requirements ... 8
5 General test equipment, materials and conditions ... 10
6 Test methods ... 11
7 Inspection rules ... 17
8 Marks, packaging, transport, storage ... 19
Annex A (Informative) Technical differences and reasons between this
Standard and ISO 12757-1.1998, ISO 12757-2.1998 ... 21
National Standard No. 1 Amendment ... 23
Foreword
This Standard modified and adopted ISO 12757-1.1998, Ball point pens and
refills - Part 1. General use and ISO 12757-2.1998, Ball point pens and refills
- Part 2. Documentary use (DOC) (English version).
This Standard was redrafted based on the International standards. Compared
with ISO 12757-1.1998, ISO 12757-2.1998, the main differences in this
Standard are as follows.
- deleted Clause 3 “Definitions” of ISO 12757-1.1998 and ISO
12757-2.1998; see QB/T 2992.2-2008 Terminology of writing
instruments Part 2. Ball pens for relevant terms and definitions;
- added “Classification” and “Inspection rules” (Clause 3, Clause 7 of this
Standard);
- modified “Test equipment and accessories” to “General test equipment,
materials and conditions” (Clause 5 of this Standard; Clause 5 of ISO
12757-1.1998, ISO 12757-2.1998);
- modified “Testing” to “Test methods” (Clause 6 of this Standard; Clause
6 of ISO 12757-1.1998, ISO 12757-2.1998);
- modified “Marks and labels” to “Marks, packaging, storage” (Clause 8 of
this Standard; Clause 7 of ISO 12757-1.1998, ISO 12757-2.1998);
- deleted “Test report” (Clause 8 of ISO 12757-1.1998, ISO
12757-2.1998).
The technical differences as well as reasons between this Standard and ISO
12757-1.1998, ISO 12757-2.1998 are shown in Annex A.
This Standard was formulated on the basis of the original light industry
standard QB/T 2776-2006 Ball point pen.
Compared with QB/T 2776-2006, the main modifications in this Standard are
as follows.
- modified the standard name;
- modified the scope (Clause 1 of this Standard; Clause 1 of QB/T
2776-2006);
- deleted the terms and definitions (Clause 3 of QB/T 2776-2006);
Ball point pens and refills
1 Scope
This Standard specifies the classification, requirements, test methods,
inspection rules, marks, packaging, transport and storage of ball point pens
and refills.
This Standard is applicable to ball point pens (including refill replaceable and
refill irreplaceable) and refills for general use and document writing use
(hereinafter referred to as ball point pens and refills).
2 Normative references
The following standards contain the provisions which, through reference in
this Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 191, Packaging and storage marks (GB/T 191-2008, ISO 780.1997,
MOD)
GB/T 2828.1, Sampling procedures for inspection by attributea-Part1.
Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot
inspection (ISO 2859-1.1999, IDT)
GB/T 6388, Transport package shipping mark
GB/T 12654-2008, Writing paper
GB 21027-2007, Request in common use of security for students articles
3 Classification
3.1 Pen point classification
The pen point is classified by ball diameter (see Table 1).
4.3 For ball point pens used by underage students, the contents of
transportable elements in the ink and the coating on the pen holder (including
the pen cap) in the pens or refills shall comply with the provisions of 3.1 in GB
21027-2007. The pen cap safety shall be in accordance with the provisions of
3.7 in GB 21027-2007.
5 General test equipment, materials and conditions
5.1 Rounded drawing writing machine
When using a rounded writing machine, the setting shall meet the following
conditions.
a) writing load.
ball diameter D < 0.5 mm, 0.98 N,
ball diameter D ≥ 0.5 mm, (1.5 ± 0.1) N;
b) writing angle. (75 ± 5)°;
c) scribing speed. (4.5 ± 0.5) m/min;
d) writing format. continuous helix (perimeter of 100 mm) with spacing of 1
mm ~ 5 mm;
e) liner plate. polished stainless steel plate.
5.2 Writing paper
The one which complies with GB/T 12654-2008, of which the quantitative
specification is 80 g/m2.
5.3 Sample
In addition to the preservation test, take the unused ball point pen and refill
within six months since the date of production as testing sample.
5.4 Environmental conditions
In the absence of special provisions, the test shall be carried out under the
following environmental conditions.
a) ambient temperature. 15°C ~ 25°C;
b) relative humidity. 50% ~ 80%.
b) 500 g special balance weight of which the bottom diameter is 50 mm.
6.4.2 Method and steps
When 6.2 c) scribing ends, start the stopwatch timing till 20 s. Cover the same
type of writing paper on the end trace. Use the special balance weight to
press on the cover paper surface. Re-timing. After 10 min, separate two
papers. Check the cover paper and there should be no ink.
6.5 Copyability test
6.5.1 Instruments and materials
a) copying equipment (copier or fax machine)’
b) copy paper.
6.5.2 Method and steps
a) put the sample paper into the copying equipment;
b) start the copying equipment; the trace on the copy paper shall meet
requirements specified in Table 4.
6.6 Water resistance test
6.6.1 Materials and utensils
a) distilled water;
b) 200 mL beaker.
6.6.2 Method and steps
Place the sample paper under testing environmental conditions for 2 h. Add
the beaker and immerse it in distilled water. Immerse 1 h for “general writing”,
24 h for “document writing”. Take out and dry naturally. The trace on the
sample paper shall meet requirements specified in Table 4.
6.7 Lightfastness test
6.7.1 Test equipment
UV light box (light box inner diameter of 220 mm ~ 230 mm, UV light. power
of 30 W, wavelength of 2.537 × 102 nm, lamp length of 900 mm).
6.7.2 Method and steps
Place the sample paper at a distance of 100 mm from the UV lamp for 72 h
6.10.1 Utensils and materials
a) ethanol (GB/T 678);
b) distilled water;
c) 200 mL beaker.
6.10.2 Method and steps
Prepare the ethanol aqueous solution of which the volume fraction is 50%.
Place the sample paper under testing environmental conditions for 1 h. Place
the beaker and immerse it in the ethanol solution. Take it out after 10 min.
Immerse it in the distilled water for 10 min. After taking out, dry it naturally.
The trace on the sample paper shall meet requirements specified in Table 4.
6.11 Hydrochloric acid resistance test
6.11.1 Utensils and materials
a) hydrochloric acid (GB/T 622);
b) distilled water;
c) 200 mL beaker.
6.11.2 Method and steps
Prepare the hydrochloric acid aqueous solution of which the mass fraction is
10%. Place the sample paper under the testing environmental conditions for 1
h. Place the beaker and immerse it in the hydrochloric acid solution. Take it
out after 24 h. Immerse in the distilled water for 10 min. Take it out and dry it
naturally. The trace on the sample paper shall meet requirements specified in
Table 4.
6.12 Ammonia resistance test
6.12.1 Utensils and materials
a) ammonia (GB/T 631);
b) distilled water;
c) 200 mL beaker.
6.12.2 Method and steps
Prepare the ammonia solution of which the mass fraction is 10%. Place the
sample paper under the testing environmental conditions for 1 h. Place the
where,
h - difference between pen holder head aperture and pen head outer diameter,
in millimeters (mm);
d1 - minimum value of pen holder head aperture, in millimeters (mm);
d2 - maximum value of pen head, in millimeters (mm).
The calculation result shall be indicated by two digits after the decimal point.
6.16 Metallic clip elasticity test
6.16.1 Test equipment
Insert (wood chips, plastic sheet or metal sheet) of which the thickness is 3
mm.
6.16.2 Method and steps
Put the insert between the pen cap (holder) and pen clip bead. Take the insert
out after 10 min placement. Check and it shall be seamless between the pen
cap (holder) and pen clip bead.
6.17 Impact resistance test
6.17.1 Test equipment
Fir board of which the thickness is 30 mm.
6.17.2 Method and steps
6.17.2.1 Place the fir board of which the thickness is 30 mm on the ...
......
|