|
US$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26556-2011: Generic specification for online leak sealing sealant of pressure equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26556-2011 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Generic specification for online leak sealing sealant of pressure equipment
| Valid |
GB/T 26556-2011
|
PDF similar to GB/T 26556-2011
Basic data | Standard ID | GB/T 26556-2011 (GB/T26556-2011) | | Description (Translated English) | Generic specification for online leak sealing sealant of pressure equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 10,156 | | Date of Issue | 2011-06-16 | | Date of Implementation | 2011-12-01 | | Quoted Standard | GB/T 1690; GB/T 14837; GB/T 16584 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 9 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies requirements for pressurized sealant requirements, inspection rules, test methods, marking, packaging, transportation, storage and use of construction principles and sealing agent injection operation is used. This standard applies to all kinds of pressure seal with sealant. | GB/T 26556-2011: Generic specification for online leak sealing sealant of pressure equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Generic specification for online leak sealing sealant of pressure equipment
ICS 23.020.30
J74
National Standards of People's Republic of China
Pressure Equipment Pressure sealants technical conditions
Issued on. 2011-06-16
2011-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Appendix A of this standard is a normative appendix.
This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points.
This standard is drafted by. Tianjin Xiangyue Sealing Material Co., Ltd.
Participated in the drafting of this standard. Gansu Circle plugging technology development company, Tianjin GunnerYS Co., Ltd. seal Manufacturing Co., Ltd., Jilin Chemical Science
School pressure sealing Center, Tianjin Tianshi Pressure Seal Co., Ltd., Sinopec Guangzhou Petrochemical Company and other Group companies.
The main drafters of this standard. Zhao Fang, Zhao Kuang Jian, Wang rose, Zhao Xizhi, Zhao Qing far, Yiwei Hu Yan Road, Wang Man River, Lin Zhimin.
Pressure Equipment Pressure sealants technical conditions
1 Scope
This standard specifies requirements for pressurized sealant, inspection rules, test methods, marking, packaging, transportation, storage and sealing construction selection
The method of using the principles and injection agent operation.
This standard applies to all kinds of pressure sealing with the sealant.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to study whether according to the agreement
You can use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1690 vulcanized rubber or thermoplastic rubber Test method for resistance to liquids
GB/T 14837 Rubber and rubber products - Determination of composition thermal gravimetric analysis
GB/T 16584 Determination of rubber vulcanization characteristics with no rotor rheometer
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Sealing onlineleaksealing
In the fluid medium leaking state, effectively sealing techniques.
3.2
Sealants sealants
Pressure collectively sealing technology used special sealing material. Including injecting sealants and fastening sealant.
3.3
Injecting sealants injectingsealants
For "injection gun" Injecting a general term used composite sealing material.
3.4
Fastening sealant fasteningsealant
For fastening a special sealing method using the sealing material under pressure.
3.5
The initial injection pressure initialinjectingpressure
Indicates injecting sealants rheology degree of difficulty of the technical indicators, the unit is MPa.
3.6
Thermal curing heatingcure
Sealants chemical reaction by absorbing heat from the plastic body is converted into an elastomer in the process.
3.7
Curing temperature initialcuringtemperature
A plastic body sealant into the lowest temperature of the elastomer.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26556-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 26556-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 26556-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26556-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|