|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26466-2011: Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 26466-2011 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
| Valid |
GB/T 26466-2011
|
PDF similar to GB/T 26466-2011
Basic data | Standard ID | GB/T 26466-2011 (GB/T26466-2011) | | Description (Translated English) | Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 14,160 | | Date of Issue | 2011-05-12 | | Date of Implementation | 2011-12-01 | | Quoted Standard | GB/T 228-2002; GB/T 229-2007; GB 713-2008; GB 3531-2008; GB 6653-2008; JB 4708-2000; JB/T 4711-2003; JB 4726-2000; JB 4727-2000; JB 4728-2000; JB/T 4730.2-2005; JB/T 4730.3-2005; JB/T 4730.5-2005; JB 4732-1995; JB 4733-1996 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the stationary high-pressure hydrogen storage container with steel wound wrong design, manufacture, inspection and acceptance requirements. This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with steel wound wrong: a) design pressure is greater than or equal to 10MPa and less than 100MPa, b) the design temperature is greater than or equal to -40��C and less than or equal to 80��C, c) is greater than or equal to the inside diameter of 300mm and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product is not above 75, 000. | GB/T 26466-2011: Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
ICS 23.020.30
J74
National Standards of People's Republic of China
Stationary high-pressure hydrogen storage container with a strip-wound wrong
Issued on. 2011-05-12
2011-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points.
This standard was drafted. Zhejiang University Institute of Chemical Machinery, Juhua Group Company Engineering Co., Ltd., China Electronics Engineering Design Institute, North
Beijing speeding Green Power Technology Co., Ltd.
The main drafters of this standard. Zheng Jin Yang, Wei Chunhua, Xu Ping, Yexiao Ru, Chen Lin new, Zhang Lifang, Liu Jianhu, Liuxian Xin, Zhu Guohui.
Introduction
Wrong strip-wound pressure vessel is in the form of a pressure-vessel structure pioneered. Since 1964 the successful development, China has manufacturing
Strip wrong about Ammonia, methanol synthesis reactor, ammonia condensers, liquid copper absorber, hydraulic accumulator machine, high-pressure gas storage tanks more than 7,000.
After 40 years of theoretical analysis and experimental research and engineering applications, China has established a system to optimize the design of fault-wound steel pressure vessel
Theory, has accumulated a wealth of design, manufacturing experience.
1980 China promulgated the JB1149-80 "flat steel pressure vessels and technical conditions." In 1996 and 1997, respectively, the type of container
Included in the American Society of Mechanical Engineers Boiler and Pressure Vessel Code Case 2229 and 2269, namely Case2229DesignofLayeredVessels
UsingFlatRibbonWoundCylindricalShels, SectionⅧ, Division1 and Case2269DesignofLayered
VesselsUsingFlatRibbonWoundCylindricalShels, SectionⅧ, Division2, it can be used in the manufacture of the design pressure
Less than 70MPa, a diameter of 250mm ~ 3000mm, the design temperature does not exceed 427 ℃ pressure container.
This standard is summed up in the wrong strip-wound pressure vessels (especially stationary high-pressure hydrogen storage container with a strip-wound wrong) design, manufacture,
Experience, based on the latest research achievements at home and abroad to develop.
Stationary high-pressure hydrogen storage container with a strip-wound wrong
1 Scope
This standard specifies the stationary high-pressure hydrogen storage container with a strip wrong about the design, manufacture, inspection and acceptance requirements.
This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with a strip wound wrong.
a) greater than the design pressure of less than or equal to 10MPa and 100MPa;
b) greater than or equal to the design temperature -40 ℃ deg.] C and less than or equal to 80;
c) 300mm inner diameter greater than or equal to and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product of
Not more than 75,000.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228-2002 metallic materials at room temperature tensile test method
GB/T 229-2007 metallic materials - Charpy pendulum impact test method
GB 713-2008 boiler and pressure vessel steel plate
GB 3531-2008 cryogenic low-alloy steel plates for pressure vessels
GB 6653-2008 with steel sheet and strip for welded gas cylinders
JB4708-2000 steel pressure vessel welding procedure qualification
JB/T 4711-2003 applying pressure vessels and transport packaging
JB4726-2000 pressure vessel carbon steel and low alloy steel forgings
JB4727-2000 temperature pressure vessels low alloy steel forgings
JB4728-2000 pressure vessel steel forgings
JB/T 4730.2-2005 pressure equipment Non-destructive testing - Part 2. ray detector
JB/T 4730.3-2005 Nondestructive testing of pressure equipments - Part 3. Ultrasonic testing
JB/T 4730.5-2005 Nondestructive Testing Pressure Equipment - Part 5. penetrant testing
JB4732-1995 steel pressure vessel - Analysis and Design Standard (2005 edition confirmed)
JB4733-1996 stainless steel pressure vessel explosion composite plate
3 Definitions, symbols
3.1 Definitions
3.1.1
Stationary high-pressure hydrogen storage container with a strip-wound wrong stationaryflatsteelribbonwoundvesselsforstorageofhigh
pressurehydrogen
Outside the thinner inner tube angle was wrong about the multilayer flat strip (number of layers is even), steel rings and cylinder to a certain angle, the strip adjacent layers
Around the opposite, and only the ends of each strip with hemispherical head and the strengthening of high-pressure hydrogen storage vessel hoop are welded constituted (the type shown in Figure 1,
2, the external interface type for the container according to process requirements).
|