HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 26136-2018 English PDF

US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26136-2018: Ultra-high pressure waterjet cutting machine
Status: Valid

GB/T 26136: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 26136-2018English519 Add to Cart 5 days [Need to translate] Ultra-high pressure waterjet cutting machine Valid GB/T 26136-2018
GB/T 26136-2010English639 Add to Cart 4 days [Need to translate] Ultra-high pressure waterjet cutting machine Obsolete GB/T 26136-2010

PDF similar to GB/T 26136-2018


Standard similar to GB/T 26136-2018

GB/T 13277.1   JB/T 6879   GB/T 7782   GB/T 26148   GB/T 26135   

Basic data

Standard ID GB/T 26136-2018 (GB/T26136-2018)
Description (Translated English) Ultra-high pressure waterjet cutting machine
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J70
Classification of International Standard 23.100
Word Count Estimation 26,222
Date of Issue 2018-12-28
Date of Implementation 2019-07-01
Older Standard (superseded by this standard) GB/T 26136-2010
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 26136-2018: Ultra-high pressure waterjet cutting machine

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ultra--high pressure waterjet cutting machine ICS 23.100 J70 National Standards of People's Republic of China Replace GB/T 26136-2010 Ultra high pressure water cutting machine Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 type, basic parameters and model number 1 4 Technical requirements 3 5 Test method 7 6 Inspection rules 9 7 Marking, packaging, storage and transportation 10 Appendix A (Normative Appendix) Inspection Requirements for Cutting Platforms 12

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 26136-2010 "Ultra High Pressure Water Cutting Machine". Compared with GB/T 26136-2010, except for editorial changes The main technical changes are as follows. --- The scope of the standard is modified to a post-mixing ultra-high pressure water cutting machine, the parameter range is modified to 250MPa~400MPa (see Chapter 1, Chapter 1 of the.2010 edition); --- The basic parameter table has been deleted according to the scope (see 3.2.1, 3.2.1 of the.2010 edition); --- Increased the performance of the "main machine operating under rated pressure and rated flow conditions, the pressure fluctuation of the output ultra-high pressure water should be ≤ 5%" Seeking (see 4.2.1.4); --- Increased inspection requirements for "cutting platforms" (see 4.2.2); --- Added inspection requirements for "four-axis linkage cutting heads" (see 4.2.3); --- Increased the inspection requirements for the "five-axis linkage cutting head" (see 4.2.4); --- Increased the accumulative running time requirements of "accumulators, high pressure cylinders" (see Table 4). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Jet Equipment Standardization Technical Committee (SAC/TC493). This standard was drafted. Nanjing Dadi Waterjet Co., Ltd., Hefei General Machinery Research Institute, Guangzhou Huasheng Machinery Equipment Co., Ltd. Shenyang Alto Fu Technology Co., Ltd., Shanghai Lion Mai Technology Co., Ltd. The main drafters of this standard. Xue Shengxiong, Chen Bo, Wu Ziquan, Li Yuefeng, Chen Zhengwen, Zhao Hongjun, Zhang Shijin, Jiang Zhenhan. The previous versions of the standards replaced by this standard are. ---GB/T 26136-2010. Ultra high pressure water cutting machine

1 Scope

This standard specifies the type, basic parameter model, technical requirements, test methods, signs, packaging and storage of the post-mixing ultra-high pressure water cutting machine. Deposit and transport. This standard is applicable to ultra-high pressure water cutting machine with rated output pressure of 250MPa~400MPa (referred to as "water cutting machine" for short, its main machine is Ultra high pressure supercharger or ultra high pressure pump).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3 common thread finish, shoulder distance, undercut and chamfer GB/T 191 packaging storage and transportation icon GB/T 196 basic thread basic size GB/T 197 ordinary thread tolerance GB/T 699 high quality carbon structural steel GB/T 700 carbon structural steel GB/T 1220 stainless steel rod GB/T 3077 alloy structural steel GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB 5749 Sanitary Standard for Drinking Water GB/T 13306 signage GB/T 14976 stainless steel seamless pipe for fluid transportation GB/T 17421.1 General rules for machine tool inspection - Part 1. Geometrical accuracy of machine tools under no load or finishing conditions 3 type, basic parameters and models 3.1 type The water cutting machine is composed of an ultra-high pressure generating device (main unit), a cutting platform, a cutting actuator and a control system. Main unit of water cutting machine Hydraulically driven supercharger and ultra high pressure pump, the prime mover is electric motor or diesel engine. 3.2 Basic parameters and models 3.2.1 Basic parameters The basic parameters of the water cutting machine host should be as specified in Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26136-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26136-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26136-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26136-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 26136-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26136-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.