|
US$194.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25361.2-2010: Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25361.2-2010 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles
| Valid |
GB/T 25361.2-2010
|
PDF similar to GB/T 25361.2-2010
Basic data | Standard ID | GB/T 25361.2-2010 (GB/T25361.2-2010) | | Description (Translated English) | Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J92 | | Classification of International Standard | 27.020 | | Word Count Estimation | 10,180 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-03-01 | | Quoted Standard | GB/T 230.1; GB/T 231.1; GB/T 1182; GB/T 3505; GB/T 9450; GB/T 10610; GB/T 11343; GB/T 15822.1; GB/T 15822.2; GB/T 15822.3; GB/T 17879-1999; GB/T 18779.1; GB/T 18779.2; GB/T 18779.3; GB/T 19001; GB/T 25361.1-2010; GB/T 4340.1; GB/T 4340.2; GB/T 4340.3; GB/T 4340.4 | | Adopted Standard | ISO 18669-2-2004, IDT | | Regulation (derived from) | National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the inspection rules for measuring the piston pin. Applicable to the outer diameter of 8 mm-100 mm reciprocating internal combustion engines and compressors piston pin. Piston pin for other purposes other than road vehicles, as long as the manufacturer and the customer agreed, but also on the part of GB/T 25361 is for use with appropriate modifications. | GB/T 25361.2-2010: Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Internal combustion engines Piston pins Part 2. Inspection measuring principles
ICS 27.020
J92
National Standards of People's Republic of China
The internal combustion engine piston pin
Part 2. Inspection Rules
Part 2. Inspectionmeasuringprinciples
(ISO 18669-2.2004, IDT)
Issued on. 2010-11-10
2011-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 25361 "internal combustion engine piston pin" is divided into two parts.
--- Part 1. Technical requirements;
--- Part 2. inspection rules.
This part of GB/T 25361 Part 2.
This part identical with ISO 18669-2.2004 "internal combustion engine piston pin - Part 2. Inspection Rules" (in English).
This section is equivalent translation ISO 18669-2.2004. For ease of use, this section made the following editorial changes.
--- "This International Standard" be replaced by "this section";
--- Remove the foreword to international standards;
--- Use the decimal symbol. "" Instead of a decimal point "."
This part of ISO 18669-2.2004 adopted in other international standards, where the country has been adopted as a standard, replaced by our standards
Corresponding to the international standards.
This part is proposed by China Machinery Industry Federation.
This part of the internal combustion engine by the National Standardization Technical Committee (SAC/TC177) centralized.
This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Shanghai Automotive Co., Ltd. Commercial Vehicle Technical Center.
The main drafters of this section. meter-dimensional Bin Qu Junming, Gu Qing, Song Guochan, Bi Ye, Zhao good, Xie Yaping, Chen Yunqing.
This section first formulated.
The internal combustion engine piston pin
Part 2. Inspection Rules
1 Scope
This section GB/T 25361 requirements for measuring piston pin inspection rules, applicable to the outer diameter of 8mm ~ 100mm to
Reciprocating internal combustion engine and compressor piston pin.
Piston pin for other purposes other than road vehicles, as long as the manufacturer and the customer agreed, but also appropriate to make this part of GB/T 25361 of
Modified after use.
2 Normative references
The following documents contain provisions which, through reference GB/T 25361 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard
Feet) (GB/T 230.1-2009, ISO 6508-1.2005, MOD)
GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test method (GB/T 231.1-2009, ISO 6506-1.
2005, MOD)
GB/T 1182 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerancing
(GB/T 1182-2008, ISO 1101.2004, IDT)
GB/T 3505 Geometrical product specifications (GPS) Surface texture Profile method - Terms, definitions and surface texture parameters
(GB/T 3505-2009, ISO 4287.1997, IDT)
GB/T 4340 (all parts) of metallic materials - Vickers hardness test
GB/T 9450 steel carburized hardened layer depth measurement and verification (GB/T 9450-2005, ISO 2639.2002, MOD)
GB/T 10610 Geometrical product specifications (GPS) Surface texture Profile method - Rules and procedures for evaluation of the surface structure
(GB/T 10610-2009, ISO 4288.1996, IDT)
GB/T 11343-contact ultrasonic NDT oblique flaw detection method
GB/T 15822.1 destructive testing - Magnetic particle testing - Part 1. General (GB/T 15822.1-2005, ISO 9934-1.2001, IDT)
GB/T 15822.2 destructive testing - Magnetic particle testing - Part 2. Detection media (GB/T 15822.2-2005, ISO 9934-2.
2002, IDT)
GB/T 15882.3 destructive testing - Magnetic particle testing - Part 3. Equipment (GB/T 15822.3-2005, ISO 9934-3.2002, IDT)
GB/T 17879-1999 gear grinding surface after tempering etching test (idt ISO 14104.1995)
GB/T 18779.1 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1. Specification according to inspection
Pass or fail decision rule (GB/T 18779.1-2002, eqv ISO 14253-1.1998)
GB/T 18779.2 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2. Measuring equipment school
Uncertainty Evaluation Guide registration and product testing in GPS measurements (GB/T 18779.2-2004, ISO /T S14253-2.1999, IDT)
GB/T 18779.3 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3. About the measurement
Directory statements Uncertainty consensus (GB/T 18779.3-2009, ISO /T S14253-3.2002, IDT)
GB/T 19001 quality management system requirements (GB/T 19001-2008, ISO 9001.2008, IDT)
GB/T 25361.1-2010 internal combustion piston pin Part 1. Technical requirements (ISO 18669-1.2004, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25361.2-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25361.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25361.2-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25361.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|