HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 25162.1-2010 English PDF

US$194.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25162.1-2010: Packaging -- Sacks-test -- Part 1: Paper sacks
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 25162.1-2010English194 Add to Cart 3 days [Need to translate] Packaging -- Sacks-test -- Part 1: Paper sacks Valid GB/T 25162.1-2010

PDF similar to GB/T 25162.1-2010


Standard similar to GB/T 25162.1-2010

GB 23350   GB/T 25163   GB/T 25322   GB/T 25160   GB/T 25159   GB/T 25162.2   

Basic data

Standard ID GB/T 25162.1-2010 (GB/T25162.1-2010)
Description (Translated English) Packaging -- Sacks-test -- Part 1: Paper sacks
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A80
Classification of International Standard 55.020
Word Count Estimation 10,160
Date of Issue 2010-09-26
Date of Implementation 2011-03-01
Quoted Standard GB/T 4857.5; ISO 6599-1; ISO 7023
Adopted Standard ISO 7965-1-1984, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 6 of 2010 (total 161)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the method through drop bags full vertical impact test methods. This method can be used both for vertical impact of a single trial of paper, paper can be used as measured perpendicular to the impact of hazardous contains the distribution system test series resistance of a component. This section provides test equipment, test procedures and test reports. This section is in GB/T 4857. 5 formulated on the basis of, but only for the paper bag.

GB/T 25162.1-2010: Packaging -- Sacks-test -- Part 1: Paper sacks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Packaging Sacks-test Part 1. Paper sacks ICS 55.020 A80 National Standards of People's Republic of China Bag drop test - Part 1. Paper bags Packaging-Sacks-droptest-Part 1. Papersacks (ISO 7965-1. 1984, IDT) Issued on. 2010-09-26 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 25162 "bag drop test" is divided into two parts. --- Part 1. paper bag; --- Part 2. thermoplastic flexible film bag. This is Part 1 GB/T 25162 of. This part identical with ISO 7965-1. 1984 "bag drop test - Part 1. Paper bags" (in English). For ease of use, this standard made the following editorial changes. a) Remove the preface to international standards; b) references GB/T 4857.5-92 instead of ISO 2248; c) use a decimal point instead of a comma as the decimal point, '' ''; e) The standard of "Figure A.1 ~ Figure B.1" correspond to international standards "FIGS. 2 to 4." This part of the Annex A, Annex B, Annex C is informative appendix. This part of the National Packaging Standardization Technical Committee (SAC/TC49) and focal points. This section drafted by. China Packaging Research & Test Center, Mechanical Science Research Institute, China Packaging Federation. The main drafters of this section. Li Hua, Li Tiesheng, cattle Shumei, Yuan Wen Guang, Wang Li, Wang Qing, Zhu Jing. Bag drop test - Part 1. Paper bags

1 Scope

This section GB/T 25162 specifies the test method drop method of vertical impact, filled paper bag. This method can For research on the impact of vertical bags of single tests also may be tested in a paper bag containing vertical shock hazard circulation system An integral part of the series resistance tests. This section specifies the content of the test equipment, test procedures and test reports. This section is in GB/T 4857.5 on the basis of established, but only for the paper bag.

2 Normative references

The following documents contain provisions which, through reference GB/T 25162 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4857.5 packaging transport package drop test method (GB/T 4857.5-1992, eqv ISO 2248. 1985) ISO 6599-1 bag test conditions - Part 1. Paper bags ISO 7023 bags empty bag inspection and sampling methods Principle 3 After a rigid plane above the lift bag full release of its free fall on the plane. Atmospheric conditions during the test, the drop height Degree and location of the package are pre-configured.

4 Test Equipment

Example drop test equipment required in Appendix A. 4.1 lifting device In the release process can not enhance or damage the test sample. 4.2 support means Means for supporting the test sample prior to release should make the test sample in a predetermined position. 1) 4.3 release device The device should enable the release of the test sample drop shock struck the table (4.4) before touching any part of the device does not drop freely. 4.4 Impact mesa It should have a certain level of quality rigid, so as not to move during the test, no deformation. 1) supporting the test sample of different methods, such as the test sample from the upper end of its lifting, or from the bottom to hold up, the role of the impact test samples situations difference Not great. Thus supporting method test samples shall be stated in the test report. Typically, the impact should table. a) block, its quality should be at least 50 times the most important test of the quality of the bag; b) a flat, table height difference between any two points on the horizontal must not exceed 2mm; c) strong, static load 10kg placed on any area of \u200b\u200b100mm2 table, the deformation should not exceed 0.1mm; Size d) the area should be sufficient to ensure that the test sample is completely fall within the impact surface.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25162.1-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25162.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25162.1-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25162.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.