|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25143-2010: Specification of moulds for vacuum thermoforming
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25143-2010 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Specification of moulds for vacuum thermoforming
| Valid |
GB/T 25143-2010
|
PDF similar to GB/T 25143-2010
Basic data | Standard ID | GB/T 25143-2010 (GB/T25143-2010) | | Description (Translated English) | Specification of moulds for vacuum thermoforming | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J46 | | Classification of International Standard | 25.120.30 | | Word Count Estimation | 6,633 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-03-01 | | Quoted Standard | GB/T 1184-1996; GB/T 1804-2000; GB/T 9438 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the requirements for vacuum forming mold, acceptance, signs, packaging and transport, This standard applies to vacuum forming mold design, manufacture and acceptance. | GB/T 25143-2010: Specification of moulds for vacuum thermoforming---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification of moulds for vacuum thermoforming
ICS 25.120.30
J46
National Standards of People's Republic of China
Vacuum molding technical conditions
Issued on. 2010-09-26
2011-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard by the National Standardization Technical Committee proposed die.
This standard by the National Standardization Technical Committee mold (SAC/TC33) centralized.
This standard was drafted. Anhui Kunpeng equipment Die Manufacturing Co., Guilin Electrical Apparatus Research Institute, China Yangtze Group Chuzhou Yangtze
Die Manufacturing Co., Ltd., Nanjing Yangzi Kunpeng equipment Die Manufacturing Co., Ltd., Henan Xinfei Electric Co., Ltd.
The main drafters of this standard. Hude Yun, WENG Shi Zhen, Cai Weidong, were tsunami, in Chinese, Yang Anmin.
Vacuum molding technical conditions
1 Scope
This standard specifies the requirements for vacuum molding, inspection, labeling, packaging and transportation.
This standard applies to vacuum forming mold design, manufacture and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqv ISO 2768-2. 1989)
GB/T 1804-2000 General tolerances for linear and angular dimensions tolerances tolerances (ISO 2768-1. 1989, EQV)
GB/T 9438 aluminum alloy castings
3 Requirements
3.1 Basic requirements
3.1.1 mold dimensions should vacuum forming machine work table size adapt weight of the mold should be in a vacuum forming machine bearing weight rating
Load within the range.
3.1.2 In addition to the products have special requirements, mold stripping slope should not be less than 0.5 °.
3.1.3 Bevel column axis (or linear motion guide direction) and the horizontal angle α should be greater than the ramp surface and the horizontal slider locking angle β,
see picture 1.
1 --- linear bearings;
2 --- Bevel column;
3 --- oblique slider;
4 --- body;
α --- angle pin axis and the horizontal angle;
β --- oblique slider locking surface and the horizontal angle.
Figure 1 a schematic view of the angle pin guide means
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25143-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25143-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25143-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25143-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|